[meta-xilinx] PCI Express not working with Intel Gigabit ET Dual port Server Adapter
Beg, Kaleem (GE Transportation)
kaleem.beg at ge.com
Mon Mar 13 15:13:48 PDT 2017
ZCU102 Red D dev board with poky build (using 2016.2 tool chainset in Ubuntu 14.04) does not connect to the Intel NIC card. The Broadcom NIC Card (https://www.amazon.com/Broadcom-BCM5751-Netxtreme-Ethernet-SOFTWARE/dp/B005NX1DAK<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_Broadcom-2DBCM5751-2DNetxtreme-2DEthernet-2DSOFTWARE_dp_B005NX1DAK&d=DwMFAg&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=tU6dGNN9_B1gXdRnYtHaNPnP2iw4qdy7hODsWhGOMIc&m=w9fPVLxHQwSSfs85J5XgCFACC3wPqtJiEN9vq_YYquc&s=Xq4g-aHIgaQiSxD4tPK2SYHMITmBrCUsCdq1MGxygtg&e=>) communicates just fine.
The Intel card is enabled in the kernel configuration.
[cid:image001.png at 01D29C1D.2CABD8D0]
Here is the Boot log:
Xilinx Zynq MP First Stage Boot Loader
Release 2016.2 Mar 10 2017 - 12:35:09
NOTICE: ATF running on XCZU9EG/silicon v1/RTL5.1 at 0xfffe5000
NOTICE: BL31: Secure code at 0x60000000
NOTICE: BL31: Non secure code at 0x8000000
NOTICE: BL31: v1.2(release):1058495
NOTICE: BL31: Built : 09:13:21, Mar 8 2017
U-Boot 2016.01 (Mar 08 2017 - 08:47:49 -0800) Xilinx ZynqMP ZCU102
I2C: ready
DRAM: 4 GiB
Enabling Caches...
EL Level: EL2
MMC: sdhci at ff170000: 0
Using default environment
In: serial at ff000000
Out: serial at ff000000
Err: serial at ff000000
Bootmode: SD_MODE1
SCSI: SATA link 0 timeout.
SATA link 1 timeout.
AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
scanning bus for devices...
Found 0 device(s).
Net: ZYNQ GEM: ff0e0000, phyaddr 12, interface rgmii-id
Warning: ethernet at ff0e0000 (eth0) using random MAC address - a2:92:83:65:c6:29
eth0: ethernet at ff0e0000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Device: sdhci at ff170000
Manufacturer ID: 41
OEM: 3432
Name: SD32G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 29.1 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading system.dtb
27739 bytes read in 20 ms (1.3 MiB/s)
reading Image
12037632 bytes read in 797 ms (14.4 MiB/s)
## Flattened Device Tree blob at 04000000
Booting using the fdt blob at 0x4000000
Loading Device Tree to 000000000fff6000, end 000000000ffffc5a ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.0-xilinx (xilinx at ubuntu) (gcc version 5.3.0 (GCC) ) #1 SMP Mon Mar 13 14:39:42 PDT 2017
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc87ff64000 s23832 r8192 d29416 u61440
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1034240
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4 drm_kms_helper.edid_firmware=edid/1024x768.bin
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB [mem 0x73fff000-0x77fff000] (64MB) mapped at [ffffffc073fff000-ffffffc077ffefff]
[ 0.000000] Memory: 3920976K/4194304K available (7918K kernel code, 519K rwdata, 2892K rodata, 320K init, 351K bss, 142256K reserved, 131072K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe1dc00000 ( 476 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc880000000 ( 34816 MB)
[ 0.000000] .init : 0xffffffc000b11000 - 0xffffffc000b61000 ( 320 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000b10014 ( 10817 KB)
[ 0.000000] .data : 0xffffffc000b79000 - 0xffffffc000bfae00 ( 520 KB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
[ 0.000003] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns
[ 0.000293] Console: colour dummy device 80x25
[ 0.000713] console [tty0] enabled
[ 0.000732] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000)
[ 0.000756] pid_max: default: 32768 minimum: 301
[ 0.000869] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000885] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001453] EFI services will not be available.
[ 0.001478] ASID allocator initialised with 65536 entries
[ 0.002287] Detected VIPT I-cache on CPU1
[ 0.002309] CPU1: Booted secondary processor [410fd034]
[ 0.002530] Detected VIPT I-cache on CPU2
[ 0.002546] CPU2: Booted secondary processor [410fd034]
[ 0.002760] Detected VIPT I-cache on CPU3
[ 0.002777] CPU3: Booted secondary processor [410fd034]
[ 0.002804] Brought up 4 CPUs
[ 0.002873] SMP: Total of 4 processors activated.
[ 0.002888] CPU: All CPU(s) started at EL2
[ 0.002910] alternatives: patching kernel code
[ 0.003200] devtmpfs: initialized
[ 0.007314] DMI not present or invalid.
[ 0.007406] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.010386] xor: measuring software checksum speed
[ 0.047975] 8regs : 2178.000 MB/sec
[ 0.088004] 8regs_prefetch: 1935.000 MB/sec
[ 0.128030] 32regs : 2413.000 MB/sec
[ 0.168058] 32regs_prefetch: 2178.000 MB/sec
[ 0.168071] xor: using function: 32regs (2413.000 MB/sec)
[ 0.168444] NET: Registered protocol family 16
[ 0.180083] cpuidle: using governor ladder
[ 0.192086] cpuidle: using governor menu
[ 0.192187] vdso: 2 pages (1 code @ ffffffc000b81000, 1 data @ ffffffc000b80000)
[ 0.192221] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.192702] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.193600] ARM CCI_400_r1 PMU driver probed
[ 0.280248] raid6: int64x1 gen() 414 MB/s
[ 0.348305] raid6: int64x1 xor() 429 MB/s
[ 0.416392] raid6: int64x2 gen() 623 MB/s
[ 0.484430] raid6: int64x2 xor() 556 MB/s
[ 0.552526] raid6: int64x4 gen() 910 MB/s
[ 0.620543] raid6: int64x4 xor() 685 MB/s
[ 0.688629] raid6: int64x8 gen() 1057 MB/s
[ 0.756703] raid6: int64x8 xor() 684 MB/s
[ 0.824801] raid6: neonx1 gen() 675 MB/s
[ 0.892806] raid6: neonx1 xor() 703 MB/s
[ 0.960883] raid6: neonx2 gen() 1045 MB/s
[ 1.028960] raid6: neonx2 xor() 933 MB/s
[ 1.097029] raid6: neonx4 gen() 1383 MB/s
[ 1.165066] raid6: neonx4 xor() 1079 MB/s
[ 1.233154] raid6: neonx8 gen() 1557 MB/s
[ 1.301212] raid6: neonx8 xor() 1132 MB/s
[ 1.301224] raid6: using algorithm neonx8 gen() 1557 MB/s
[ 1.301236] raid6: .... xor() 1132 MB/s, rmw enabled
[ 1.301248] raid6: using intx1 recovery algorithm
[ 1.301467] ACPI: Interpreter disabled.
[ 1.301954] arm-smmu fd800000.smmu: probing hardware configuration...
[ 1.301969] arm-smmu fd800000.smmu: SMMUv2 with:
[ 1.301982] arm-smmu fd800000.smmu: stage 1 translation
[ 1.301996] arm-smmu fd800000.smmu: stage 2 translation
[ 1.302008] arm-smmu fd800000.smmu: nested translation
[ 1.302025] arm-smmu fd800000.smmu: stream matching with 48 register groups, mask 0x7fff
[ 1.302046] arm-smmu fd800000.smmu: 16 context banks (0 stage-2 only)
[ 1.302061] arm-smmu fd800000.smmu: Supported page sizes: 0x60211000
[ 1.302076] arm-smmu fd800000.smmu: Stage-1: 48-bit VA -> 48-bit IPA
[ 1.302090] arm-smmu fd800000.smmu: Stage-2: 48-bit IPA -> 48-bit PA
[ 1.302918] arm-smmu fd800000.smmu: registered 26 master devices
[ 1.303152] iommu: Adding device fd500000.dma to group 0
[ 1.303183] iommu: Adding device fd510000.dma to group 1
[ 1.303209] iommu: Adding device fd520000.dma to group 2
[ 1.303235] iommu: Adding device fd530000.dma to group 3
[ 1.303262] iommu: Adding device fd540000.dma to group 4
[ 1.303290] iommu: Adding device fd550000.dma to group 5
[ 1.303317] iommu: Adding device fd560000.dma to group 6
[ 1.303344] iommu: Adding device fd570000.dma to group 7
[ 1.303380] iommu: Adding device ffa80000.dma to group 8
[ 1.303406] iommu: Adding device ffa90000.dma to group 9
[ 1.303433] iommu: Adding device ffaa0000.dma to group 10
[ 1.303459] iommu: Adding device ffab0000.dma to group 11
[ 1.303486] iommu: Adding device ffac0000.dma to group 12
[ 1.303512] iommu: Adding device ffad0000.dma to group 13
[ 1.303541] iommu: Adding device ffae0000.dma to group 14
[ 1.303567] iommu: Adding device ffaf0000.dma to group 15
[ 1.303605] iommu: Adding device ff0e0000.ethernet to group 16
[ 1.303680] iommu: Adding device ff0f0000.spi to group 17
[ 1.303735] iommu: Adding device ff170000.sdhci to group 18
[ 1.303790] iommu: Adding device amba:usb at fe200000 to group 19
[ 1.304100] SCSI subsystem initialized
[ 1.304310] usbcore: registered new interface driver usbfs
[ 1.304357] usbcore: registered new interface driver hub
[ 1.304400] usbcore: registered new device driver usb
[ 1.304494] media: Linux media interface: v0.10
[ 1.304533] Linux video capture interface: v2.00
[ 1.304573] pps_core: LinuxPPS API ver. 1 registered
[ 1.304586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 1.304619] PTP clock support registered
[ 1.304663] EDAC MC: Ver: 3.0.0
[ 1.304867] dmi: Firmware registration failed.
[ 1.304942] Advanced Linux Sound Architecture Driver Initialized.
[ 1.305412] clocksource: Switched to clocksource arch_sys_counter
[ 1.305679] pnp: PnP ACPI: disabled
[ 1.310972] NET: Registered protocol family 2
[ 1.311321] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.311617] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.312147] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.312205] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.312299] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.312497] NET: Registered protocol family 1
[ 1.312714] RPC: Registered named UNIX socket transport module.
[ 1.312728] RPC: Registered udp transport module.
[ 1.312739] RPC: Registered tcp transport module.
[ 1.312751] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.313058] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.313640] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.313718] audit: initializing netlink subsys (disabled)
[ 1.313748] audit: type=2000 audit(1.312:1): initialized
[ 1.314151] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.314507] VFS: Disk quotas dquot_6.6.0
[ 1.314551] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.315032] NFS: Registering the id_resolver key type
[ 1.315064] Key type id_resolver registered
[ 1.315076] Key type id_legacy registered
[ 1.315099] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.315145] jffs2: version 2.2. (NAND) (SUMMARY) (c) 2001-2006 Red Hat, Inc.
[ 1.316110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.316136] io scheduler noop registered
[ 1.316150] io scheduler deadline registered
[ 1.316179] io scheduler cfq registered (default)
[ 1.316744] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 1.316821] PCI host bridge /amba/pcie at fd0e0000 ranges:
[ 1.316837] No bus range found for /amba/pcie at fd0e0000, using [bus 00-ff]
[ 1.316862] MEM 0xe1000000..0xefffffff -> 0xe1000000
[ 1.316932] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 1.316949] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.316964] pci_bus 0000:00: root bus resource [mem 0xe1000000-0xefffffff]
[ 1.317225] iommu: Adding device 0000:00:00.0 to group 20
[ 1.317331] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 1.318164] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 1.318403] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 1.318531] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 1.318656] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 1.318784] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 1.318906] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 1.319036] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 1.319164] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 1.319290] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 1.319359] xilinx-zynqmp-dma ffa80000.dma: main clock not found.
[ 1.319374] xilinx-zynqmp-dma ffa80000.dma: Probing channel failed
[ 1.319403] xilinx-zynqmp-dma: probe of ffa80000.dma failed with error -2
[ 1.319463] xilinx-zynqmp-dma ffa90000.dma: main clock not found.
[ 1.319478] xilinx-zynqmp-dma ffa90000.dma: Probing channel failed
[ 1.319498] xilinx-zynqmp-dma: probe of ffa90000.dma failed with error -2
[ 1.319561] xilinx-zynqmp-dma ffaa0000.dma: main clock not found.
[ 1.319575] xilinx-zynqmp-dma ffaa0000.dma: Probing channel failed
[ 1.319596] xilinx-zynqmp-dma: probe of ffaa0000.dma failed with error -2
[ 1.319656] xilinx-zynqmp-dma ffab0000.dma: main clock not found.
[ 1.319670] xilinx-zynqmp-dma ffab0000.dma: Probing channel failed
[ 1.319690] xilinx-zynqmp-dma: probe of ffab0000.dma failed with error -2
[ 1.319752] xilinx-zynqmp-dma ffac0000.dma: main clock not found.
[ 1.319767] xilinx-zynqmp-dma ffac0000.dma: Probing channel failed
[ 1.319787] xilinx-zynqmp-dma: probe of ffac0000.dma failed with error -2
[ 1.319848] xilinx-zynqmp-dma ffad0000.dma: main clock not found.
[ 1.319862] xilinx-zynqmp-dma ffad0000.dma: Probing channel failed
[ 1.319882] xilinx-zynqmp-dma: probe of ffad0000.dma failed with error -2
[ 1.319942] xilinx-zynqmp-dma ffae0000.dma: main clock not found.
[ 1.319956] xilinx-zynqmp-dma ffae0000.dma: Probing channel failed
[ 1.319976] xilinx-zynqmp-dma: probe of ffae0000.dma failed with error -2
[ 1.320038] xilinx-zynqmp-dma ffaf0000.dma: main clock not found.
[ 1.320052] xilinx-zynqmp-dma ffaf0000.dma: Probing channel failed
[ 1.320072] xilinx-zynqmp-dma: probe of ffaf0000.dma failed with error -2
[ 1.320151] zynqmp_pm_probe power management API version error. Expected: v0.2 - Found: v0.0
[ 1.320175] zynqmp_pm: probe of firmware failed with error -5
[ 1.342133] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.342989] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 219, base_baud = 6250000) is a xuartps
[ 2.566316] console [ttyPS0] enabled
[ 2.570033] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 220, base_baud = 6250000) is a xuartps
[ 2.579265] [drm] Initialized drm 1.1.0 20060810
[ 2.584144] Unable to detect cache hierarchy from DT for CPU 0
[ 2.594083] brd: module loaded
[ 2.599696] loop: module loaded
[ 2.603348] ahci-ceva fd0c0000.ahci: ceva,p0-cominit-params property not defined
[ 2.610689] ahci-ceva: probe of fd0c0000.ahci failed with error -22
[ 2.617025] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.624085] m25p80 spi0.0: found n25q512a, expected m25p80
[ 2.629506] m25p80 spi0.0: Controller not in SPI_TX_QUAD mode, just use extended SPI mode
[ 2.637710] m25p80 spi0.0: n25q512a (131072 Kbytes)
[ 2.642541] 8 ofpart partitions found on MTD device spi0.0
[ 2.647985] Creating 8 MTD partitions on "spi0.0":
[ 2.652759] 0x000000000000-0x000001e00000 : "boot"
[ 2.657965] 0x000001e00000-0x000001e40000 : "bootenv"
[ 2.663335] 0x000001e40000-0x000003840000 : "kernel"
[ 2.668624] 0x000003840000-0x000008000000 : "spare"
[ 2.673829] 0x000000000000-0x000000100000 : "qspi-fsbl-uboot"
[ 2.679904] 0x000000100000-0x000000600000 : "qspi-linux"
[ 2.685552] 0x000000600000-0x000000620000 : "qspi-device-tree"
[ 2.691714] 0x000000620000-0x000000c00000 : "qspi-rootfs"
[ 2.697567] CAN device driver interface
[ 2.702343] libphy: MACB_mii_bus: probed
[ 2.709150] macb ff0e0000.ethernet eth0: Could not attach to PHY
[ 2.733550] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.739569] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.745077] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.752066] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.757830] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.763609] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.769549] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 2.776456] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.782047] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 2.789830] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.795760] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[ 2.803374] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[ 2.809130] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[ 2.818476] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 2.824578] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.3.46-k
[ 2.832449] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[ 2.838294] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 2.845376] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 2.851052] i40evf: Intel(R) XL710/X710 Virtual Function Network Driver - version 1.3.33
[ 2.859097] Copyright (c) 2013 - 2015 Intel Corporation.
[ 2.864419] Intel(R) Ethernet Switch Host Interface Driver - version 0.15.2-k
[ 2.871503] Copyright (c) 2013 Intel Corporation.
[ 3.077579] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.083003] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.090873] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f665 hci version 0x100 quirks 0x00010010
[ 3.099526] xhci-hcd xhci-hcd.0.auto: irq 224, io mem 0xfe200000
[ 3.105581] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.112292] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.119498] usb usb1: Product: xHCI Host Controller
[ 3.124351] usb usb1: Manufacturer: Linux 4.4.0-xilinx xhci-hcd
[ 3.130254] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 3.135381] hub 1-0:1.0: USB hub found
[ 3.139073] hub 1-0:1.0: 1 port detected
[ 3.143072] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.148488] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.156166] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.164261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.170975] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.178182] usb usb2: Product: xHCI Host Controller
[ 3.183036] usb usb2: Manufacturer: Linux 4.4.0-xilinx xhci-hcd
[ 3.188939] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 3.194010] hub 2-0:1.0: USB hub found
[ 3.197696] hub 2-0:1.0: 1 port detected
[ 3.202269] usbcore: registered new interface driver uas
[ 3.207572] usbcore: registered new interface driver usb-storage
[ 3.213716] mousedev: PS/2 mouse device common for all mice
[ 3.219552] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
[ 3.226741] i2c /dev entries driver
[ 3.232110] pca953x 0-0020: interrupt support not compiled in
[ 3.239454] pca953x 0-0021: interrupt support not compiled in
[ 3.245185] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 206
[ 3.251368] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 207
[ 3.258071] i2c i2c-0: Added multiplexed i2c bus 2
[ 3.263232] i2c i2c-0: Added multiplexed i2c bus 3
[ 3.268625] i2c i2c-0: Added multiplexed i2c bus 4
[ 3.273442] i2c i2c-0: Added multiplexed i2c bus 5
[ 3.278158] pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca9544
[ 3.285805] at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 3.292442] i2c i2c-6: Failed to register i2c client 24c08 at 0x55 (-16)
[ 3.299117] i2c i2c-6: of_i2c: Failure registering /amba/i2c at ff030000/i2cswitch at 74/i2c at 0/eeprom at 55
[ 3.308070] i2c i2c-6: Failed to register i2c client 24c08 at 0x56 (-16)
[ 3.314740] i2c i2c-6: of_i2c: Failure registering /amba/i2c at ff030000/i2cswitch at 74/i2c at 0/eeprom at 56
[ 3.323692] i2c i2c-6: Failed to register i2c client 24c08 at 0x57 (-16)
[ 3.330364] i2c i2c-6: of_i2c: Failure registering /amba/i2c at ff030000/i2cswitch at 74/i2c at 0/eeprom at 57
[ 3.339319] i2c i2c-1: Added multiplexed i2c bus 6
[ 3.344233] i2c i2c-1: Added multiplexed i2c bus 7
[ 3.349108] i2c i2c-1: Added multiplexed i2c bus 8
[ 3.353977] i2c i2c-1: Added multiplexed i2c bus 9
[ 3.358848] i2c i2c-1: Added multiplexed i2c bus 10
[ 3.363751] i2c i2c-1: Added multiplexed i2c bus 11
[ 3.368656] i2c i2c-1: Added multiplexed i2c bus 12
[ 3.373553] i2c i2c-1: Added multiplexed i2c bus 13
[ 3.378358] pca954x 1-0074: registered 8 multiplexed busses for I2C switch pca9548
[ 3.386104] i2c i2c-1: Added multiplexed i2c bus 14
[ 3.391008] i2c i2c-1: Added multiplexed i2c bus 15
[ 3.395917] i2c i2c-1: Added multiplexed i2c bus 16
[ 3.401038] i2c i2c-1: Added multiplexed i2c bus 17
[ 3.405940] i2c i2c-1: Added multiplexed i2c bus 18
[ 3.410842] i2c i2c-1: Added multiplexed i2c bus 19
[ 3.415750] i2c i2c-1: Added multiplexed i2c bus 20
[ 3.420652] i2c i2c-1: Added multiplexed i2c bus 21
[ 3.425457] pca954x 1-0075: registered 8 multiplexed busses for I2C switch pca9548
[ 3.434217] ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.440819] ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.447414] ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.454008] ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.460604] ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.467203] ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.473802] ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.480396] ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.486992] ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.493593] ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.500255] ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
[ 3.506853] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.513457] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.520055] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.526654] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.533252] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.539845] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.546444] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 3.579722] EDAC MC: ECC not enabled
[ 3.583303] sdhci: Secure Digital Host Controller Interface driver
[ 3.589408] sdhci: Copyright(c) Pierre Ossman
[ 3.593751] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.600639] sdhci-arasan ff170000.sdhci: No vmmc regulator found
[ 3.606571] sdhci-arasan ff170000.sdhci: No vqmmc regulator found
[ 3.653422] mmc0: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using ADMA 64-bit
[ 3.663623] usbcore: registered new interface driver usbhid
[ 3.669121] usbhid: USB HID core driver
[ 3.676657] si570 8-005d: registered, current frequency 300000000 Hz
[ 3.696559] si570 9-005d: registered, current frequency 148500000 Hz
[ 3.703514] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 3.714196] Initializing XFRM netlink socket
[ 3.718455] NET: Registered protocol family 10
[ 3.723225] sit: IPv6 over IPv4 tunneling driver
[ 3.728106] NET: Registered protocol family 17
[ 3.732487] NET: Registered protocol family 15
[ 3.736903] can: controller area network core (rev 20120528 abi 9)
[ 3.743092] NET: Registered protocol family 29
[ 3.747505] can: raw protocol (rev 20120528)
[ 3.751749] can: broadcast manager protocol (rev 20120528 t)
[ 3.757394] can: netlink gateway (rev 20130117) max_hops=1
[ 3.762921] Key type dns_resolver registered
[ 3.767464] registered taskstats version 1
[ 3.771857] Btrfs loaded
[ 3.774866] rtc_zynqmp ffa60000.rtc: setting system clock to 2017-03-13 21:34:46 UTC (1489440886)
[ 3.782993] mmc0: new high speed SDHC card at address 0007
[ 3.783194] mmcblk0: mmc0:0007 SD32G 29.1 GiB
[ 3.784133] mmcblk0: p1 p2
[ 3.796449] ALSA device list:
[ 3.799341] No soundcards found.
[ 4.805010] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.813053] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 4.825355] devtmpfs: mounted
[ 4.828372] Freeing unused kernel memory: 320K (ffffffc000b11000 - ffffffc000b61000)
[ 4.836059] Freeing alternatives memory: 68K (ffffffc000b61000 - ffffffc000b72000)
INIT: version 2.88 booting
Error opening /dev/fb0: No such file or directory
Starting udev
[ 5.349720] udevd[1508]: starting version 3.1.5
[ 5.363148] random: udevd urandom read with 13 bits of entropy available
[ 5.499022] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.989459] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
INIT: Entering runlevel: 5
Configuring network interfaces... eth0: ERROR while getting interface flags: No such device
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Starting rpcbind daemon...done.
Starting bluetooth
bluetoothd
Starting syslogd/klogd: done
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ]
Starting Telephony daemon
Starting Linux NFC daemon
Starting Trusted Computing daemon:
device driver not loaded, skipping.
Poky (Yocto Project Reference Distro) 2.1.2 zcu102-zynqmp /dev/ttyPS0
zcu102-zynqmp login: root
root at zcu102-zynqmp:~# 2;237R
-sh: 2: command not found
-sh: 237R: command not found
root at zcu102-zynqmp:~#
root at zcu102-zynqmp:~#
root at zcu102-zynqmp:~# lspci
00:00.0 PCI bridge: Xilinx Corporation Device d021
root at zcu102-zynqmp:~#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20170313/0a4d96a7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 29717 bytes
Desc: image001.png
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20170313/0a4d96a7/attachment.png>
More information about the meta-xilinx
mailing list