[meta-xilinx] ['meta-xilinx-tools'] dependency issue building FSBL: cant read file ${DEPLOY_DIR_IMAGE}/fsbl-${MACHINE}.elf

[Brett R. Nicholas]

Hi there,


I'm trying to build a custom Yocto image for the Zedboard using the meta-xilinx and meta-xilinx-tools layers. I'm trying to use meta-xilinx-tools to generate an FSBL as part of the core-image-full-cmdline target, however the build fails with the output below:


NOTE: Executing RunQueue Tasks
ERROR: core-image-full-cmdline-1.0-r0 do_xilinx_bootbin: Function failed: do_xilinx_bootbin (log file is located at /home/brett/Thesis/Zynq_Linux/Yocto/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/core-image-full-cmdline/1.0-r0/temp/log.do_xilinx_bootbin.2239)
ERROR: Logfile of failure stored in: /home/brett/Thesis/Zynq_Linux/Yocto/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/core-image-full-cmdline/1.0-r0/temp/log.do_xilinx_bootbin.2239
Log data follows:
| DEBUG: Executing shell function do_xilinx_bootbin
| [ERROR]  : Can't read file - /home/brett/Thesis/Zynq_Linux/Yocto/poky/build/tmp/deploy/images/zedboard-zynq7/fsbl-zedboard-zynq7.elf
| WARNING: /home/brett/Thesis/Zynq_Linux/Yocto/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/core-image-full-cmdline/1.0-r0/temp/run.do_xilinx_bootbin.2239:1 exit 1 from 'bootgen -image /home/brett/Thesis/Zynq_Linux/Yocto/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/core-image-full-cmdline/1.0-r0/core-image-full-cmdline-1.0/bootgen.bif -arch zynq -w -o BOOT.bin'
| ERROR: Function failed: do_xilinx_bootbin (log file is located at /home/brett/Thesis/Zynq_Linux/Yocto/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/core-image-full-cmdline/1.0-r0/temp/log.do_xilinx_bootbin.2239)
ERROR: Task (/home/brett/Thesis/Zynq_Linux/Yocto/poky/meta/recipes-extended/images/core-image-full-cmdline.bb:do_xilinx_bootbin) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3819 tasks of which 3818 didn't need to be rerun and 1 failed.



It seems that the task depends on fsbl-zedboard-zynq7.elf, however this file does not exist. Should this file be generated in bootgen? Or am I misunderstanding something. My local.conf modifications to support the meta-xilinx-tools are below:



# Define path to xsct tools (needed for bitfile generation)
XILINX_VER_MAIN = "2016.4"
XILINX_SDK_TOOLCHAIN = "/opt/Xilinx/SDK/${XILINX_VER_MAIN}"

# Define path to HDF (TODO: we should be using our project hosted on GIT)
HDF_BASE = "file://"
HDF_PATH = "/home/brett/Thesis/Vivado_WS/sha256test/sha256test.sdk/design_1_wrapper.hdf"

#add Boot.bin dependency
IMAGE_CLASSES += " xilinx-bootbin"

#specify BIF partition attributes required for BOOT.bin
BIF_PARTITION_ATTR= "fsbl bitstream u-boot"

# specify BIF partition attributes for bitstream
# enable bitstream-Note this is not enabled by default (missing in BIF_PARTITION_ATTR)
# TODO: do we need to get rid of download preface?
BIF_PARTITION_IMAGE[bitstream] ?= "${DEPLOY_DIR_IMAGE}/download-${MACHINE}.bit"
BIF_PARTITION_DEPENDS[bitstream] ?= "virtual/bitstream"

# specify BIF partition attributes for FSBL
# bootloader is FSBL. Location where FSBL binary is present and dependency to build FSBL
BIF_PARTITION_IMAGE[fsbl]="${DEPLOY_DIR_IMAGE}/fsbl-${MACHINE}.elf"
BIF_PARTITION_DEPENDS[fsbl]="virtual/fsbl"

# specify BIF partition attributes for u-boot
# Location where u-boot binary is present
BIF_PARTITION_IMAGE[u-boot]="${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.elf"



Am I improperly configuring something?


Thanks,

-Brett
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20170501/6c8054f9/attachment.html>