[meta-xilinx] [PATCH 8/12] arm-trusted-firmware: Split common build/config into include

[Nathan Rossi]

Split the common build/config/description/etc. of the recipe into an
include file so that multiple versions can use the include instead of
copying the recipe content.

Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
---
 .../arm-trusted-firmware/arm-trusted-firmware.inc  | 55 ++++++++++++++++++++++
 .../arm-trusted-firmware_git.bb                    | 55 +---------------------
 2 files changed, 56 insertions(+), 54 deletions(-)
 create mode 100644 recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc

diff --git a/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
new file mode 100644
index 0000000000..b841fa16cb
--- /dev/null
+++ b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
@@ -0,0 +1,55 @@
+DESCRIPTION = "ARM Trusted Firmware"
+
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
+
+PROVIDES = "virtual/arm-trusted-firmware"
+
+inherit deploy
+
+DEPENDS += "u-boot-mkimage-native"
+
+S = "${WORKDIR}/git"
+B = "${WORKDIR}/build"
+
+BRANCH = "master"
+SRC_URI = "git://github.com/Xilinx/arm-trusted-firmware.git;protocol=https;branch=${BRANCH}"
+
+COMPATIBLE_MACHINE = "zynqmp"
+PLATFORM_zynqmp = "zynqmp"
+
+# requires CROSS_COMPILE set by hand as there is no configure script
+export CROSS_COMPILE="${TARGET_PREFIX}"
+
+# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application
+CFLAGS[unexport] = "1"
+LDFLAGS[unexport] = "1"
+AS[unexport] = "1"
+LD[unexport] = "1"
+
+do_configure() {
+	:
+}
+
+do_compile() {
+	oe_runmake -C ${S} BUILD_BASE=${B} PLAT=${PLATFORM} RESET_TO_BL31=1 bl31
+}
+
+do_install() {
+	:
+}
+
+OUTPUT_DIR = "${B}/${PLATFORM}/release"
+
+do_deploy() {
+	install -d ${DEPLOYDIR}
+	install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${DEPLOYDIR}/arm-trusted-firmware-${MACHINE}.elf
+	install -m 0644 ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/arm-trusted-firmware-${MACHINE}.bin
+
+	# Get the entry point address from the elf.
+	BL31_BASE_ADDR=$(${READELF} -h ${OUTPUT_DIR}/bl31/bl31.elf | egrep -m 1 -i "entry point.*?0x" | sed -r 's/.*?(0x.*?)/\1/g')
+	mkimage -A arm64 -O linux -T kernel -C none \
+		-a $BL31_BASE_ADDR -e $BL31_BASE_ADDR \
+		-d ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/arm-trusted-firmware.ub
+}
+addtask deploy before do_build after do_compile
diff --git a/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
index bead46727a..dc5e3fa1cd 100644
--- a/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
+++ b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
@@ -1,60 +1,7 @@
-DESCRIPTION = "ARM Trusted Firmware"
-
-LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
-
-PROVIDES = "virtual/arm-trusted-firmware"
-
-inherit deploy
-
-DEPENDS += "u-boot-mkimage-native"
-
-S = "${WORKDIR}/git"
-B = "${WORKDIR}/build"
-
-BRANCH = "master"
-SRC_URI = "git://github.com/Xilinx/arm-trusted-firmware.git;protocol=https;branch=${BRANCH}"
+include arm-trusted-firmware.inc
 
 XILINX_RELEASE_VERSION = "v2016.3"
 SRCREV ?= "a9e3716615a23c78e3cdea5b5b2f840f89817cb1"
 
 PV = "1.2-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}"
 
-COMPATIBLE_MACHINE = "zynqmp"
-PLATFORM_zynqmp = "zynqmp"
-
-# requires CROSS_COMPILE set by hand as there is no configure script
-export CROSS_COMPILE="${TARGET_PREFIX}"
-
-# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application
-CFLAGS[unexport] = "1"
-LDFLAGS[unexport] = "1"
-AS[unexport] = "1"
-LD[unexport] = "1"
-
-do_configure() {
-	:
-}
-
-do_compile() {
-	oe_runmake -C ${S} BUILD_BASE=${B} PLAT=${PLATFORM} RESET_TO_BL31=1 bl31
-}
-
-do_install() {
-	:
-}
-
-OUTPUT_DIR = "${B}/${PLATFORM}/release"
-
-do_deploy() {
-	install -d ${DEPLOYDIR}
-	install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${DEPLOYDIR}/arm-trusted-firmware-${MACHINE}.elf
-	install -m 0644 ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/arm-trusted-firmware-${MACHINE}.bin
-
-	# Get the entry point address from the elf.
-	BL31_BASE_ADDR=$(${READELF} -h ${OUTPUT_DIR}/bl31/bl31.elf | egrep -m 1 -i "entry point.*?0x" | sed -r 's/.*?(0x.*?)/\1/g')
-	mkimage -A arm64 -O linux -T kernel -C none \
-		-a $BL31_BASE_ADDR -e $BL31_BASE_ADDR \
-		-d ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/arm-trusted-firmware.ub
-}
-addtask deploy before do_build after do_compile
-- 
2.11.0