[meta-xilinx] [PATCH v2 4/4] arm-trusted-firmware: deploy versioned images

[Manjukumar Harthikote Matha]

> -----Original Message-----
> From: Nathan Rossi [mailto:nathan at nathanrossi.com]
> Sent: Monday, May 08, 2017 7:04 PM
> To: Manjukumar Harthikote Matha <MANJUKUM at xilinx.com>
> Cc: meta-xilinx at lists.yoctoproject.org
> Subject: Re: [meta-xilinx] [PATCH v2 4/4] arm-trusted-firmware: deploy versioned
> images
>
> On 9 May 2017 at 09:17, Manjukumar Matha <manjukumar.harthikote-
> matha at xilinx.com> wrote:
> > From: Cyril Chemparathy <cyril.chemparathy at xilinx.com>
> >
> > This patch modifies the deployed content to use versioned image names,
> > while retaining unversioned symlinks.
> >
> > Signed-off-by: Cyril Chemparathy <cyril.chemparathy at xilinx.com>
> > Signed-off-by: Manjukumar Matha
> > <manjukumar.harthikote-matha at xilinx.com>
> > ---
> >  recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb | 12
> > +++++++++---
> >  1 file changed, 9 insertions(+), 3 deletions(-)
> >
> > diff --git
> > a/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
> > b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
> > index 0cd34d4..e59ce2a 100644
> > --- a/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
> > +++ b/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb
> > @@ -23,6 +23,9 @@ XILINX_RELEASE_VERSION = "v2017.1"
> >
> >  PV = "1.3-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}"
> >
> > +ATF_BASE_NAME ?= "${PN}${PKGE}-${PKGV}-${PKGR}-${DATETIME}"
>
> It is common to have a "-" between PN and PKGE. Any reason for skipping it?
>
No reason, other than missed it :)
Will send v2.

Thanks
Manju

> Regards,
> Nathan
>
> > +ATF_BASE_NAME[vardepsexclude] = "DATETIME"
> > +
> >  COMPATIBLE_MACHINE = "zynqmp"
> >  PLATFORM_zynqmp = "zynqmp"
> >
> > @@ -51,13 +54,16 @@ OUTPUT_DIR = "${B}/${PLATFORM}/release"
> >
> >  do_deploy() {
> >         install -d ${DEPLOYDIR}
> > -       install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf ${DEPLOYDIR}/arm-trusted-
> firmware.elf
> > -       install -m 0644 ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/arm-trusted-
> firmware.bin
> > +       install -m 0644 ${OUTPUT_DIR}/bl31/bl31.elf
> ${DEPLOYDIR}/${ATF_BASE_NAME}.elf
> > +       ln -sf ${ATF_BASE_NAME}.elf ${DEPLOYDIR}/${PN}.elf
> > +       install -m 0644 ${OUTPUT_DIR}/bl31.bin
> ${DEPLOYDIR}/${ATF_BASE_NAME}.bin
> > +       ln -sf ${ATF_BASE_NAME}.bin ${DEPLOYDIR}/${PN}.bin
> >
> >         # Get the entry point address from the elf.
> >         BL31_BASE_ADDR=$(${READELF} -h ${OUTPUT_DIR}/bl31/bl31.elf | egrep -m
> 1 -i "entry point.*?0x" | sed -r 's/.*?(0x.*?)/\1/g')
> >         mkimage -A arm64 -O linux -T kernel -C none \
> >                 -a $BL31_BASE_ADDR -e $BL31_BASE_ADDR \
> > -               -d ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/arm-trusted-firmware.ub
> > +               -d ${OUTPUT_DIR}/bl31.bin ${DEPLOYDIR}/${ATF_BASE_NAME}.ub
> > +       ln -sf ${ATF_BASE_NAME}.ub ${DEPLOYDIR}/${PN}.ub
> >  }
> >  addtask deploy before do_build after do_compile
> > --
> > 2.7.4
> >
> > --
> > _______________________________________________
> > meta-xilinx mailing list
> > meta-xilinx at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-xilinx


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.