[meta-xilinx] Issue with boot.bin file for picozed

[Alan Levy]

The morty branch of meta-xilinx creates a second file called “BOOT.bin” as well as “boot.bin” (this being Linux, case is significant in filenames); this is the file you need to use. You will also need to configure local.conf to set up the FSBL correctly (see http://www.wiki.xilinx.com/Using+meta-xilinx-tools+layer). What this web page doesn’t mention is that you need to add the following line:

BIF_PARTITION_ATTR[fsbl]="bootloader"

Depending on what you are doing you may also need to configure u-boot (uEnv.txt) and devicetree to get the system to boot properly.
ALAN LEVY
Lead Consultant, Embedded Systems

Tel > +44 (0) 1799 533200
Email > alan.levy at plextek.com
[http://www.plextek.com/wp-content/uploads/2016/04/Plextek-LOGO-for-email.jpg]<http://www.plextek.com/>

www.plextek.com<http://www.plextek.com/>
The Plextek Building, London Road, Great Chesterford, Saffron Walden, CB10 1NY, UK

Plextek is the trading name of Plextek Services Ltd. Registered in England and Wales, no. 09826669


From: Philip Gilley [mailto:philipgilley at gmail.com]
Sent: 10 May 2017 19:27
To: meta-xilinx at lists.yoctoproject.org
Subject: [meta-xilinx] Issue with boot.bin file for picozed

I have been trying to get my PicoZed to boot off the SD card with yocto. I have been using the morty branch and the boot.bin file just cause the PS lights on the carrier board to blink red. I tried going back to the Jethro branch to see if the older branch made a difference and that branch's boot.bin file atleast sent the message "unsupported boot mode selected" to the console instead of the PS blinking. I was successful running yocto on my zedboard. Please let me know if I am doing anything wrong.

Thanks in advance,
Philip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20170512/15a445c2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 8152 bytes
Desc: image001.jpg
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20170512/15a445c2/attachment.jpg>