[meta-xilinx] [PATCH 7/9] pmu-firmware: Port pmu-firmware recipe

[Luca Ceresoli]

Hi Manjukumar,

On 11/12/18 17:21, Manjukumar Harthikote Matha wrote:
> Hi Luca,
> 
>> -----Original Message-----
>> From: Luca Ceresoli [mailto:luca at lucaceresoli.net]
>> Sent: Tuesday, December 11, 2018 8:15 AM
>> To: Manjukumar Harthikote Matha <MANJUKUM at xilinx.com>; Alejandro Enedino
>> Hernandez Samaniego <alejandr at xilinx.com>; meta-xilinx at yoctoproject.org
>> Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port pmu-firmware recipe
>>
>> Hi Manjukumar,
>>
>> On 11/12/18 17:07, Manjukumar Harthikote Matha wrote:
>>> Hi Luca,
>>>
>>>> -----Original Message-----
>>>> From: meta-xilinx-bounces at yoctoproject.org [mailto:meta-xilinx-
>>>> bounces at yoctoproject.org] On Behalf Of Luca Ceresoli
>>>> Sent: Tuesday, December 11, 2018 7:45 AM
>>>> To: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>;
>>>> meta- xilinx at yoctoproject.org
>>>> Subject: Re: [meta-xilinx] [PATCH 7/9] pmu-firmware: Port
>>>> pmu-firmware recipe
>>>>
>>>> Hi Alejandro,
>>>>
>>>> On 06/12/18 22:56, Alejandro Enedino Hernandez Samaniego wrote:
>>>>> This patch ports the pmu-firmware recipe from meta-xilinx-bsp to be
>>>>> used with the standalone/baremetal toolchain and also upgrades it to
>>>>> the latest release at this point.
>>>>>
>>>>> The recipe was trimmed down, and a few changes had to be made to
>>>>> make it compatible with the baremetal layer, DEPENDS, pass include
>>>>> dir, license and such.
>>>>>
>>>>> Signed-off-by: Alejandro Enedino Hernandez Samaniego
>>>>> <alejandr at xilinx.com>
>>>>> Signed-off-by: Manjukumar Matha
>>>>> <manjukumar.harthikote-matha at xilinx.com>
>>>>
>>>> I tried to test your entire patch series but with bad luck. Well,
>>>> indeed I tested the patches from the github meta-xilinx repo up to
>>>> [0], not sure whether the repo is more up to date than the patches here.
>>>>
>>>> The first issue is that xilinx-standalone is compatible with thud,
>>>> but on the mentioned commit (as well as on master) the
>>>> mete-xilinx-bsp layer is compatible with sumo only. I solved by cherry-picking [1].
>>>>
>>>> Then I followed the instructions in README.md and 'bitbake newlib' ran
>> successfully.
>>>> But 'bitbake pmu-firmware' gives:
>>>>
>>>> microblazeel-xilinx-elf-gcc  -mlittle-endian -mxl-barrel-shift
>>>> -mxl-pattern-compare  - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul
>>>> -mxl-soft-div --
>>>> sysroot=/home/ceresoli/temp/prova-thud-
>>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
>>>> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot
>>>> -o executable.elf  pm_master.o  pm_api.o  xpfw_error_manager.o
>>>> xpfw_restart.o pm_config.o  xpfw_mod_legacy.o  pm_requirement.o
>>>> pm_node_reset.o  pm_core.o pm_system.o  pm_common.o  xpfw_xpu.o
>>>> pm_gic_proxy.o  xpfw_aib.o xpfw_events.o  pm_binding.o
>>>> pm_mmio_access.o  xpfw_scheduler.o  pm_slave.o xpfw_mod_pm.o
>>>> pm_ddr.o pm_qspi.o  pm_sram.o  xpfw_mod_sched.o xpfw_mod_rtc.o
>>>> pm_usb.o pm_extern.o  xpfw_user_startup.o xpfw_rom_interface.o
>>>> xpfw_mod_wdt.o pm_proc.o  pm_reset.o  pm_callbacks.o xpfw_mod_stl.o
>>>> idle_hooks.o xpfw_crc.o  xpfw_ipi_manager.o  xpfw_interrupts.o
>>>> xpfw_mod_dap.o xpfw_platform.o  pm_node.o  xpfw_core.o  xpfw_resets.o
>>>> xpfw_module.o pm_periph.o  xpfw_util.o  xpfw_main.o  pm_hooks.o
>>>> pm_gpp.o pm_power.o xpfw_mod_em.o  pm_pll.o  pm_clock.o
>>>> pm_notifier.o  xpfw_start.o  - MMD -MP -Wl,--build-id=none
>>>> -I/home/ceresoli/temp/prova-thud-
>>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
>>>> firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-sysroot/usr/include
>>>> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group
>>>> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxil,-lgcc,-lc,--end-group
>>>> -nostartfiles -Wl,--gc-sections
>>>> -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib
>>>> -Tlscript.ld
>>>> lto1: fatal error: multiple prevailing defs for 'XUsbPsu_DisableIntr'
>>>> compilation terminated.
>>>> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit
>>>> status compilation terminated.
>>>> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee
>>>> l-v9.2-bs-
>>>> cmp-xilinx-elf/pmu-firmware/v2018.2+gitAUTOINC+0c6cd096c8-r0/recipe-s
>>>> ysroot-
>>>> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil
>>>> inx-
>>>> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld:
>>>> error: lto-wrapper failed
>>>> collect2: error: ld returned 1 exit status
>>>> Makefile:28: recipe for target 'executable.elf' failed
>>>> make: *** [executable.elf] Error 1
>>>>
>>>> I then tried with current master-next [2] and got:
>>>>
>>>> microblazeel-xilinx-elf-gcc  -mlittle-endian -mxl-barrel-shift
>>>> -mxl-pattern-compare  - mno-xl-reorder -mcpu=v9.2 -mxl-soft-mul
>>>> -mxl-soft-div --
>>>> sysroot=/home/ceresoli/temp/prova-thud-
>>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
>>>> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot
>>>> -o executable.elf  pm_master.o  xpfw_error_manager.o  xpfw_restart.o
>>>> pm_notifier.o  xpfw_mod_legacy.o  pm_requirement.o  pm_node_reset.o
>>>> pm_core.o  pm_system.o  pm_config.o  xpfw_xpu.o  pm_gic_proxy.o
>>>> xpfw_aib.o xpfw_events.o  pm_binding.o  pm_mmio_access.o
>>>> xpfw_scheduler.o  pm_slave.o pm_pinctrl.o  xpfw_mod_pm.o  pm_ddr.o
>>>> pm_qspi.o  pm_sram.o xpfw_mod_sched.o  xpfw_mod_rtc.o  pm_usb.o
>>>> pm_extern.o  xpfw_user_startup.o xpfw_rom_interface.o  xpfw_mod_wdt.o
>>>> pm_proc.o  pm_reset.o  pm_callbacks.o xpfw_mod_stl.o  idle_hooks.o
>>>> xpfw_crc.o  xpfw_ipi_manager.o  xpfw_interrupts.o xpfw_mod_dap.o
>>>> xpfw_platform.o  pm_node.o  xpfw_core.o  xpfw_resets.o xpfw_module.o
>>>> pm_periph.o  xpfw_util.o  xpfw_main.o  pm_hooks.o  pm_gpp.o
>>>> pm_power.o xpfw_mod_em.o  pm_pll.o  pm_clock.o  xpfw_start.o  -MMD
>>>> -MP - Wl,--build-id=none -I/home/ceresoli/temp/prova-thud-
>>>> xilinx/poky/build/tmp/work/microblazeel-v9.2-bs-cmp-xilinx-elf/pmu-
>>>> firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-sysroot/usr/include
>>>> -Os -Wl,--start-group,-lxil,-lgcc,-lc,--end-group
>>>> -Wl,--start-group,-lxilfpga,-lxilsecure,-lxilskey,-lxil,-lgcc,-lc,--e
>>>> nd-group -nostartfiles -Wl,--gc-sections
>>>> -L../misc/zynqmp_pmufw_bsp/psu_pmu_0/lib
>>>> -Tlscript.ld
>>>> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee
>>>> l-v9.2-bs-
>>>> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s
>>>> ysroot-
>>>> native/usr/bin/microblazeel-xilinx-elf/../../lib/microblazeel-xilinx-
>>>> elf/gcc/../../../libexec/microblazeel-xilinx-elf/gcc/microblazeel-xilinx-elf/8.2.0/ld:
>>>> cannot open linker script file xilinx.ld: No such file or directory
>>>> collect2: error: ld returned 1 exit status
>>>> lto-wrapper: fatal error: microblazeel-xilinx-elf-gcc returned 1 exit
>>>> status compilation terminated.
>>>> /home/ceresoli/temp/prova-thud-xilinx/poky/build/tmp/work/microblazee
>>>> l-v9.2-bs-
>>>> cmp-xilinx-elf/pmu-firmware/v2018.3+gitAUTOINC+56f3da2afb-r0/recipe-s
>>>> ysroot-
>>>> native/usr/bin/microblazeel-xilinx-elf/../../libexec/microblazeel-xil
>>>> inx-
>>>> elf/gcc/microblazeel-xilinx-elf/8.2.0/ld:
>>>> error: lto-wrapper failed
>>>> collect2: error: ld returned 1 exit status
>>>> Makefile:28: recipe for target 'executable.elf' failed
>>>>
>>>> Am I doing something wrong?
>>>
>>> I tried replicating the issue but I am unable to do so.
>>> Do you have pmu-firmware in a different tmp work directory?
>>>
>>> I have the following in my local.conf
>>> MACHINE="zynqmp-pmu"
>>> DISTRO="xilinx-standalone"
>>> GCCVERSION="7.%"
>>> TMPDIR="${TOPDIR}/pmutmp"
>>>
>>> And run as bitbake pmu-firmware
>>
>> I'm not trying the multiconfig setup yet. I'm trying to set up the standalone layer as
>> per its README.md and get a pmufw binary out of that.
>>
> 
> This is not multiconfig, just regular build. Maybe GCCVERSION="7.%" is missing in your setup, we should add it to MACHINE and README as well

Good catch! Adding GCCVERSION="7.%" to conf/local.conf pmu-firmware builds.

Thanks for the very fast reply!

-- 
Luca