[meta-xilinx] [meta-xilinx-bsp][PATCH v2 1/9] binutils: rebase microblaze patches for binutils 2.31
Manjukumar Matha
manjukumar.harthikote-matha at xilinx.com
Wed Dec 19 16:58:54 PST 2018
From: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
---
.../recipes-microblaze/binutils/binutils%.bbappend | 2 +-
...Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch | 65 ------
...-add-mlittle-endian-and-mbig-endian-flags.patch | 64 ------
...able-the-warning-message-for-eh_frame_hdr.patch | 34 ---
...laxation-of-assembler-resolved-references.patch | 81 -------
...Blaze-debug_loc-sections-after-linker-rel.patch | 242 --------------------
...Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch | 35 ---
...MicroBlaze-address-extension-instructions.patch | 104 ---------
...Add-new-MicroBlaze-bit-field-instructions.patch | 232 --------------------
.../0009-Fixing-MicroBlaze-IMM-bug.patch | 29 ---
...n-GCC-so-that-it-will-support-.long-0U-an.patch | 34 ---
...ing-MicroBlaze-constant-range-check-issue.patch | 28 ---
...ze-fix-mask-for-barrel-shift-instructions.patch | 36 ---
...Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch | 65 ++++++
...-add-mlittle-endian-and-mbig-endian-flags.patch | 64 ++++++
...able-the-warning-message-for-eh_frame_hdr.patch | 39 ++++
...laxation-of-assembler-resolved-references.patch | 81 +++++++
...Blaze-debug_loc-sections-after-linker-rel.patch | 243 +++++++++++++++++++++
...Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch | 35 +++
...MicroBlaze-address-extension-instructions.patch | 104 +++++++++
...Add-new-MicroBlaze-bit-field-instructions.patch | 232 ++++++++++++++++++++
.../0009-Fixing-MicroBlaze-IMM-bug.patch | 29 +++
...n-GCC-so-that-it-will-support-.long-0U-an.patch | 34 +++
...ing-MicroBlaze-constant-range-check-issue.patch | 28 +++
...ze-fix-mask-for-barrel-shift-instructions.patch | 36 +++
25 files changed, 991 insertions(+), 985 deletions(-)
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0003-Disable-the-warning-message-for-eh_frame_hdr.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0004-Fix-relaxation-of-assembler-resolved-references.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0007-Add-MicroBlaze-address-extension-instructions.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0008-Add-new-MicroBlaze-bit-field-instructions.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0009-Fixing-MicroBlaze-IMM-bug.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0011-Fixing-MicroBlaze-constant-range-check-issue.patch
delete mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0003-Disable-the-warning-message-for-eh_frame_hdr.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0004-Fix-relaxation-of-assembler-resolved-references.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0007-Add-MicroBlaze-address-extension-instructions.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0008-Add-new-MicroBlaze-bit-field-instructions.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0009-Fixing-MicroBlaze-IMM-bug.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0011-Fixing-MicroBlaze-constant-range-check-issue.patch
create mode 100644 meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils%.bbappend b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils%.bbappend
index 795c671..4470972 100644
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils%.bbappend
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils%.bbappend
@@ -1,4 +1,4 @@
-FILESEXTRAPATHS_append_microblaze := "${THISDIR}/binutils-2.30:"
+FILESEXTRAPATHS_append_microblaze := "${THISDIR}/binutils-2.31:"
SRC_URI_append_microblaze = " \
file://0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch \
file://0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch \
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch
deleted file mode 100644
index 878bb32..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 91f39b692c48336117c092e4afd80899c97779e6 Mon Sep 17 00:00:00 2001
-From: David Holsgrove <david.holsgrove at xilinx.com>
-Date: Mon, 28 Aug 2017 19:53:52 -0700
-Subject: [PATCH] MicroBlaze Add wdc.ext.clear and wdc.ext.flush insns
-
-Added two new instructions, wdc.ext.clear and wdc.ext.flush,
-to enable MicroBlaze to flush an external cache, which is
-used with the new coherency support for multiprocessing.
-
-Signed-off-by: David Holsgrove <david.holsgrove at xilinx.com>
-Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
-
----
- opcodes/microblaze-opc.h | 5 ++++-
- opcodes/microblaze-opcm.h | 4 ++--
- 2 files changed, 6 insertions(+), 3 deletions(-)
-
-diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
-index ede8af8..773dc81 100644
---- a/opcodes/microblaze-opc.h
-+++ b/opcodes/microblaze-opc.h
-@@ -91,6 +91,7 @@
- #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */
- #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */
- #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */
-+#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */
- #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */
-
- /* New Mask for msrset, msrclr insns. */
-@@ -101,7 +102,7 @@
- #define DELAY_SLOT 1
- #define NO_DELAY_SLOT 0
-
--#define MAX_OPCODES 289
-+#define MAX_OPCODES 291
-
- struct op_code_struct
- {
-@@ -174,7 +175,9 @@ struct op_code_struct
- {"wic", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000068, OPCODE_MASK_H34B, wic, special_inst },
- {"wdc", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000064, OPCODE_MASK_H34B, wdc, special_inst },
- {"wdc.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000066, OPCODE_MASK_H34B, wdcclear, special_inst },
-+ {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst },
- {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst },
-+ {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst },
- {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst },
- {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst },
- {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst },
-diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
-index 92f3f19..7338f6a 100644
---- a/opcodes/microblaze-opcm.h
-+++ b/opcodes/microblaze-opcm.h
-@@ -33,8 +33,8 @@ enum microblaze_instr
- /* 'or/and/xor' are C++ keywords. */
- microblaze_or, microblaze_and, microblaze_xor,
- andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
-- wic, wdc, wdcclear, wdcflush, mts, mfs, mbar, br, brd,
-- brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt,
-+ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, br,
-+ brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt,
- bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni,
- imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid,
- brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti,
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch
deleted file mode 100644
index edeecfd..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 8b733a61ab54ba4cedb234020562502d20eebcbb Mon Sep 17 00:00:00 2001
-From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Date: Mon, 28 Aug 2017 19:53:53 -0700
-Subject: [PATCH] MicroBlaze add mlittle-endian and mbig-endian flags
-
-Added support in gas for mlittle-endian and mbig-endian flags
-as options.
-
-Updated show usage for MicroBlaze specific assembler options
-to include new entries.
-
-Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Signed-off-by: David Holsgrove <david.holsgrove at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
-
----
- gas/config/tc-microblaze.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
-index 0194cd9..42dd7ae 100644
---- a/gas/config/tc-microblaze.c
-+++ b/gas/config/tc-microblaze.c
-@@ -37,6 +37,8 @@
-
- #define OPTION_EB (OPTION_MD_BASE + 0)
- #define OPTION_EL (OPTION_MD_BASE + 1)
-+#define OPTION_LITTLE (OPTION_MD_BASE + 2)
-+#define OPTION_BIG (OPTION_MD_BASE + 3)
-
- void microblaze_generate_symbol (char *sym);
- static bfd_boolean check_spl_reg (unsigned *);
-@@ -1837,6 +1839,8 @@ struct option md_longopts[] =
- {
- {"EB", no_argument, NULL, OPTION_EB},
- {"EL", no_argument, NULL, OPTION_EL},
-+ {"mlittle-endian", no_argument, NULL, OPTION_LITTLE},
-+ {"mbig-endian", no_argument, NULL, OPTION_BIG},
- { NULL, no_argument, NULL, 0}
- };
-
-@@ -2471,9 +2475,11 @@ md_parse_option (int c, const char * arg ATTRIBUTE_UNUSED)
- switch (c)
- {
- case OPTION_EB:
-+ case OPTION_BIG:
- target_big_endian = 1;
- break;
- case OPTION_EL:
-+ case OPTION_LITTLE:
- target_big_endian = 0;
- break;
- default:
-@@ -2488,6 +2494,9 @@ md_show_usage (FILE * stream ATTRIBUTE_UNUSED)
- /* fprintf(stream, _("\
- MicroBlaze options:\n\
- -noSmall Data in the comm and data sections do not go into the small data section\n")); */
-+ fprintf (stream, _(" MicroBlaze specific assembler options:\n"));
-+ fprintf (stream, " -%-23s%s\n", "mbig-endian", N_("assemble for a big endian cpu"));
-+ fprintf (stream, " -%-23s%s\n", "mlittle-endian", N_("assemble for a little endian cpu"));
- }
-
-
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0003-Disable-the-warning-message-for-eh_frame_hdr.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0003-Disable-the-warning-message-for-eh_frame_hdr.patch
deleted file mode 100644
index 2b30c46..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0003-Disable-the-warning-message-for-eh_frame_hdr.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From dac72d809be9faf9380b181df0c19a2c6d744c54 Mon Sep 17 00:00:00 2001
-From: "Edgar E. Iglesias" <edgar.iglesias at gmail.com>
-Date: Mon, 28 Aug 2017 19:53:54 -0700
-Subject: [PATCH] Disable the warning message for eh_frame_hdr
-
-Signed-off-by: Edgar E. Iglesias <edgar.iglesias at gmail.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Inappropriate [workaround]
-
----
- bfd/elf-eh-frame.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
-diff --git a/bfd/elf-eh-frame.c b/bfd/elf-eh-frame.c
-index 95697c4..704121d 100644
---- a/bfd/elf-eh-frame.c
-+++ b/bfd/elf-eh-frame.c
-@@ -1042,10 +1042,13 @@ _bfd_elf_parse_eh_frame (bfd *abfd, struct bfd_link_info *info,
- goto success;
-
- free_no_table:
-- (*info->callbacks->einfo)
-+ /* FIXME: Remove the microblaze specifics when relaxing gets fixed. */
-+ if (bfd_get_arch(abfd) != bfd_arch_microblaze) {
- /* xgettext:c-format */
-- (_("%P: error in %B(%A); no .eh_frame_hdr table will be created.\n"),
-- abfd, sec);
-+ (*info->callbacks->einfo)
-+ (_("%P: error in %B(%A); no .eh_frame_hdr table will be created.\n"),
-+ abfd, sec);
-+ }
- hdr_info->u.dwarf.table = FALSE;
- if (sec_info)
- free (sec_info);
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0004-Fix-relaxation-of-assembler-resolved-references.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0004-Fix-relaxation-of-assembler-resolved-references.patch
deleted file mode 100644
index b543c54..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0004-Fix-relaxation-of-assembler-resolved-references.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 927ef228dfedf229dc915b273a308ab2c7bf9e19 Mon Sep 17 00:00:00 2001
-From: "Edgar E. Iglesias" <edgar.iglesias at gmail.com>
-Date: Mon, 28 Aug 2017 19:53:55 -0700
-Subject: [PATCH] Fix relaxation of assembler resolved references
-
-03/2018
-Rebased for binutils 2.30
-
-Signed-off-by: Edgar E. Iglesias <edgar.iglesias at gmail.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>
-
-Upstream-Status: Pending
-
----
- bfd/elf32-microblaze.c | 39 +++++++++++++++++++++++++++++++++++++++
- gas/config/tc-microblaze.c | 1 +
- 2 files changed, 40 insertions(+)
-
-diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
-index f1808bc..a1d810c 100644
---- a/bfd/elf32-microblaze.c
-+++ b/bfd/elf32-microblaze.c
-@@ -1887,6 +1887,45 @@ microblaze_elf_relax_section (bfd *abfd,
- irelscanend = irelocs + o->reloc_count;
- for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
- {
-+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE)
-+ {
-+ unsigned int val;
-+
-+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
-+
-+ /* This was a PC-relative instruction that was completely resolved. */
-+ if (ocontents == NULL)
-+ {
-+ if (elf_section_data (o)->this_hdr.contents != NULL)
-+ ocontents = elf_section_data (o)->this_hdr.contents;
-+ else
-+ {
-+ /* We always cache the section contents.
-+ Perhaps, if info->keep_memory is FALSE, we
-+ should free them, if we are permitted to. */
-+
-+ if (o->rawsize == 0)
-+ o->rawsize = o->size;
-+ ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
-+ if (ocontents == NULL)
-+ goto error_return;
-+ if (!bfd_get_section_contents (abfd, o, ocontents,
-+ (file_ptr) 0,
-+ o->rawsize))
-+ goto error_return;
-+ elf_section_data (o)->this_hdr.contents = ocontents;
-+ }
-+ }
-+
-+ irelscan->r_addend -= calc_fixup (irelscan->r_addend
-+ + isym->st_value, sec);
-+ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
-+ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset,
-+ irelscan->r_addend);
-+ }
-+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) {
-+ fprintf(stderr, "Unhandled NONE 64\n");
-+ }
- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
- {
- isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
-diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
-index 42dd7ae..50dbfc7 100644
---- a/gas/config/tc-microblaze.c
-+++ b/gas/config/tc-microblaze.c
-@@ -2183,6 +2183,7 @@ md_apply_fix (fixS * fixP,
- else
- fixP->fx_r_type = BFD_RELOC_NONE;
- fixP->fx_addsy = section_symbol (absolute_section);
-+ fixP->fx_done = 0;
- }
- return;
- }
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch
deleted file mode 100644
index 3817234..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From 5bf68bc39976903929f730b6eed18686c3563c05 Mon Sep 17 00:00:00 2001
-From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Date: Mon, 28 Aug 2017 19:53:56 -0700
-Subject: [PATCH] Fixup MicroBlaze debug_loc sections after linker relaxation
-
-Fixup debug_loc sections after linker relaxation Adds a new reloctype
-R_MICROBLAZE_32_NONE, used for passing reloc info from the assembler to
-the linker when the linker manages to fully resolve a local symbol
-reference.
-
-This is a workaround for design flaws in the assembler to
-linker interface with regards to linker relaxation.
-
-03/2018
-Rebased for binutils 2.30
-
-Signed-off-by: Edgar E. Iglesias <edgar.iglesias at gmail.com>
-Signed-off-by: Nagaraju Mekala <nmekala at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>
-
-Upstream-Status: Pending
-
----
- bfd/bfd-in2.h | 9 +++++++--
- bfd/elf32-microblaze.c | 45 ++++++++++++++++++++++++++++++++++++++-------
- bfd/libbfd.h | 1 +
- bfd/reloc.c | 6 ++++++
- binutils/readelf.c | 4 ++++
- gas/config/tc-microblaze.c | 5 ++++-
- include/elf/microblaze.h | 1 +
- 7 files changed, 61 insertions(+), 10 deletions(-)
-
-diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h
-index 4228603..1906195 100644
---- a/bfd/bfd-in2.h
-+++ b/bfd/bfd-in2.h
-@@ -5826,10 +5826,15 @@ value relative to the read-write small data area anchor */
- expressions of the form "Symbol Op Symbol" */
- BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
-
--/* This is a 64 bit reloc that stores the 32 bit pc relative
-+/* This is a 32 bit reloc that stores the 32 bit pc relative
- value in two words (with an imm instruction). No relocation is
- done here - only used for relaxing */
-- BFD_RELOC_MICROBLAZE_64_NONE,
-+ BFD_RELOC_MICROBLAZE_32_NONE,
-+
-+/* This is a 64 bit reloc that stores the 32 bit pc relative
-+ * +value in two words (with an imm instruction). No relocation is
-+ * +done here - only used for relaxing */
-+ BFD_RELOC_MICROBLAZE_64_NONE,
-
- /* This is a 64 bit reloc that stores the 32 bit pc relative
- value in two words (with an imm instruction). The relocation is
-diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
-index a1d810c..fc0d3e1 100644
---- a/bfd/elf32-microblaze.c
-+++ b/bfd/elf32-microblaze.c
-@@ -176,6 +176,20 @@ static reloc_howto_type microblaze_elf_howto_raw[] =
- 0x0000ffff, /* Dest Mask. */
- FALSE), /* PC relative offset? */
-
-+ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */
-+ 0, /* Rightshift. */
-+ 2, /* Size (0 = byte, 1 = short, 2 = long). */
-+ 32, /* Bitsize. */
-+ TRUE, /* PC_relative. */
-+ 0, /* Bitpos. */
-+ complain_overflow_bitfield, /* Complain on overflow. */
-+ NULL, /* Special Function. */
-+ "R_MICROBLAZE_32_NONE",/* Name. */
-+ FALSE, /* Partial Inplace. */
-+ 0, /* Source Mask. */
-+ 0, /* Dest Mask. */
-+ FALSE), /* PC relative offset? */
-+
- /* This reloc does nothing. Used for relaxation. */
- HOWTO (R_MICROBLAZE_64_NONE, /* Type. */
- 0, /* Rightshift. */
-@@ -532,6 +546,9 @@ microblaze_elf_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
- case BFD_RELOC_NONE:
- microblaze_reloc = R_MICROBLAZE_NONE;
- break;
-+ case BFD_RELOC_MICROBLAZE_32_NONE:
-+ microblaze_reloc = R_MICROBLAZE_32_NONE;
-+ break;
- case BFD_RELOC_MICROBLAZE_64_NONE:
- microblaze_reloc = R_MICROBLAZE_64_NONE;
- break;
-@@ -1832,14 +1849,23 @@ microblaze_elf_relax_section (bfd *abfd,
- }
- break;
- case R_MICROBLAZE_NONE:
-+ case R_MICROBLAZE_32_NONE:
- {
- /* This was a PC-relative instruction that was
- completely resolved. */
- int sfix, efix;
-+ unsigned int val;
- bfd_vma target_address;
- target_address = irel->r_addend + irel->r_offset;
- sfix = calc_fixup (irel->r_offset, 0, sec);
- efix = calc_fixup (target_address, 0, sec);
-+
-+ /* Validate the in-band val. */
-+ val = bfd_get_32 (abfd, contents + irel->r_offset);
-+ if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) {
-+ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend);
-+ }
-+
- irel->r_addend -= (efix - sfix);
- /* Should use HOWTO. */
- microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
-@@ -1887,12 +1913,16 @@ microblaze_elf_relax_section (bfd *abfd,
- irelscanend = irelocs + o->reloc_count;
- for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
- {
-- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE)
-+ if (1 && ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE)
- {
- unsigned int val;
-
- isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
-
-+ /* hax: We only do the following fixup for debug location lists. */
-+ if (strcmp(".debug_loc", o->name))
-+ continue;
-+
- /* This was a PC-relative instruction that was completely resolved. */
- if (ocontents == NULL)
- {
-@@ -1917,15 +1947,16 @@ microblaze_elf_relax_section (bfd *abfd,
- }
- }
-
-- irelscan->r_addend -= calc_fixup (irelscan->r_addend
-- + isym->st_value, sec);
- val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
-+
-+ if (val != irelscan->r_addend) {
-+ fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend);
-+ }
-+ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec);
-+
- microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset,
- irelscan->r_addend);
- }
-- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) {
-- fprintf(stderr, "Unhandled NONE 64\n");
-- }
- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
- {
- isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
-@@ -1985,7 +2016,7 @@ microblaze_elf_relax_section (bfd *abfd,
- elf_section_data (o)->this_hdr.contents = ocontents;
- }
- }
-- irelscan->r_addend -= calc_fixup (irel->r_addend
-+ irelscan->r_addend -= calc_fixup (irelscan->r_addend
- + isym->st_value,
- 0,
- sec);
-diff --git a/bfd/libbfd.h b/bfd/libbfd.h
-index 2f5f16e..854bb0c 100644
---- a/bfd/libbfd.h
-+++ b/bfd/libbfd.h
-@@ -2853,6 +2853,7 @@ static const char *const bfd_reloc_code_real_names[] = { "@@uninitialized@@",
- "BFD_RELOC_MICROBLAZE_32_ROSDA",
- "BFD_RELOC_MICROBLAZE_32_RWSDA",
- "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM",
-+ "BFD_RELOC_MICROBLAZE_32_NONE",
- "BFD_RELOC_MICROBLAZE_64_NONE",
- "BFD_RELOC_MICROBLAZE_64_GOTPC",
- "BFD_RELOC_MICROBLAZE_64_GOT",
-diff --git a/bfd/reloc.c b/bfd/reloc.c
-index a1353a2..4b57de7 100644
---- a/bfd/reloc.c
-+++ b/bfd/reloc.c
-@@ -6903,6 +6903,12 @@ ENUMDOC
- This is a 32 bit reloc for the microblaze to handle
- expressions of the form "Symbol Op Symbol"
- ENUM
-+ BFD_RELOC_MICROBLAZE_32_NONE
-+ENUMDOC
-+ This is a 32 bit reloc that stores the 32 bit pc relative
-+ value in two words (with an imm instruction). No relocation is
-+ done here - only used for relaxing
-+ENUM
- BFD_RELOC_MICROBLAZE_64_NONE
- ENUMDOC
- This is a 64 bit reloc that stores the 32 bit pc relative
-diff --git a/binutils/readelf.c b/binutils/readelf.c
-index fed0387..92f655d 100644
---- a/binutils/readelf.c
-+++ b/binutils/readelf.c
-@@ -12774,6 +12774,10 @@ is_none_reloc (Filedata * filedata, unsigned int reloc_type)
- || reloc_type == 32 /* R_AVR_DIFF32. */);
- case EM_METAG:
- return reloc_type == 3; /* R_METAG_NONE. */
-+ case EM_MICROBLAZE:
-+ return reloc_type == 30 /* R_MICROBLAZE_32_NONE. */
-+ || reloc_type == 0 /* R_MICROBLAZE_NONE. */
-+ || reloc_type == 9; /* R_MICROBLAZE_64_NONE. */
- case EM_NDS32:
- return (reloc_type == 0 /* R_XTENSA_NONE. */
- || reloc_type == 204 /* R_NDS32_DIFF8. */
-diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
-index 50dbfc7..d66e949 100644
---- a/gas/config/tc-microblaze.c
-+++ b/gas/config/tc-microblaze.c
-@@ -2179,7 +2179,9 @@ md_apply_fix (fixS * fixP,
- /* This fixup has been resolved. Create a reloc in case the linker
- moves code around due to relaxing. */
- if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
-- fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
-+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
-+ else if (fixP->fx_r_type == BFD_RELOC_32)
-+ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE;
- else
- fixP->fx_r_type = BFD_RELOC_NONE;
- fixP->fx_addsy = section_symbol (absolute_section);
-@@ -2401,6 +2403,7 @@ tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp)
- switch (fixp->fx_r_type)
- {
- case BFD_RELOC_NONE:
-+ case BFD_RELOC_MICROBLAZE_32_NONE:
- case BFD_RELOC_MICROBLAZE_64_NONE:
- case BFD_RELOC_32:
- case BFD_RELOC_MICROBLAZE_32_LO:
-diff --git a/include/elf/microblaze.h b/include/elf/microblaze.h
-index ae98099..c8cc57b 100644
---- a/include/elf/microblaze.h
-+++ b/include/elf/microblaze.h
-@@ -58,6 +58,7 @@ START_RELOC_NUMBERS (elf_microblaze_reloc_type)
- RELOC_NUMBER (R_MICROBLAZE_TLSDTPREL64, 27) /* TLS Offset Within TLS Block */
- RELOC_NUMBER (R_MICROBLAZE_TLSGOTTPREL32, 28) /* TLS Offset From Thread Pointer */
- RELOC_NUMBER (R_MICROBLAZE_TLSTPREL32, 29) /* TLS Offset From Thread Pointer */
-+ RELOC_NUMBER (R_MICROBLAZE_32_NONE, 30)
-
- END_RELOC_NUMBERS (R_MICROBLAZE_max)
-
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch
deleted file mode 100644
index a671cf8..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 0cad227ce495a975b32c10a8b6b0970c45024dd6 Mon Sep 17 00:00:00 2001
-From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Date: Mon, 28 Aug 2017 19:53:58 -0700
-Subject: [PATCH] Fix bug in MicroBlaze TLSTPREL Relocation
-
-Fixed the problem related to the fixup/relocations TLSTPREL.
-When the fixup is applied the addend is not added at the correct offset
-of the instruction. The offset is hard coded considering its big endian
-and it fails for Little endian. This patch allows support for both
-big & little-endian compilers
-
-Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
-
----
- bfd/elf32-microblaze.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
-index fc0d3e1..a94799f 100644
---- a/bfd/elf32-microblaze.c
-+++ b/bfd/elf32-microblaze.c
-@@ -1402,9 +1402,9 @@ microblaze_elf_relocate_section (bfd *output_bfd,
- relocation += addend;
- relocation -= dtprel_base(info);
- bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff,
-- contents + offset + 2);
-+ contents + offset + endian);
- bfd_put_16 (input_bfd, relocation & 0xffff,
-- contents + offset + 2 + INST_WORD_SIZE);
-+ contents + offset + endian + INST_WORD_SIZE);
- break;
- case (int) R_MICROBLAZE_64_PCREL :
- case (int) R_MICROBLAZE_64:
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0007-Add-MicroBlaze-address-extension-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0007-Add-MicroBlaze-address-extension-instructions.patch
deleted file mode 100644
index 9672c51..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0007-Add-MicroBlaze-address-extension-instructions.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From 3895968b5c55321d203cadb7630a2baee8699e17 Mon Sep 17 00:00:00 2001
-From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Date: Mon, 28 Aug 2017 19:53:59 -0700
-Subject: [PATCH] Add MicroBlaze address extension instructions
-
-This patch adds the support of new instructions which are required
-for supporting Address extension feature.
-
-2016-01-18 Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-
- * microblaze-opc.h (op_code_struct): Added new instructions
- * microblaze-opcm.h (microblaze_instr): Added new instructions
-
-Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
-
----
- opcodes/microblaze-opc.h | 13 ++++++++++++-
- opcodes/microblaze-opcm.h | 10 +++++-----
- 2 files changed, 17 insertions(+), 6 deletions(-)
-
-diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
-index 773dc81..4e69f76 100644
---- a/opcodes/microblaze-opc.h
-+++ b/opcodes/microblaze-opc.h
-@@ -102,7 +102,7 @@
- #define DELAY_SLOT 1
- #define NO_DELAY_SLOT 0
-
--#define MAX_OPCODES 291
-+#define MAX_OPCODES 299
-
- struct op_code_struct
- {
-@@ -178,8 +178,11 @@ struct op_code_struct
- {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst },
- {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst },
- {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst },
-+ {"wdc.clear.ea", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900000E6, OPCODE_MASK_H34B, wdcclearea, special_inst },
- {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst },
-+ {"mtse", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9500C000, OPCODE_MASK_H13S, mtse,special_inst },
- {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst },
-+ {"mfse", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94088000, OPCODE_MASK_H23S, mfse, special_inst },
- {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst },
- {"brd", INST_TYPE_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98100000, OPCODE_MASK_H124, brd, branch_inst },
- {"brld", INST_TYPE_RD_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98140000, OPCODE_MASK_H24, brld, branch_inst },
-@@ -229,18 +232,24 @@ struct op_code_struct
- {"bgeid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBEA00000, OPCODE_MASK_H1, bgeid, branch_inst },
- {"lbu", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000000, OPCODE_MASK_H4, lbu, memory_load_inst },
- {"lbur", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000200, OPCODE_MASK_H4, lbur, memory_load_inst },
-+ {"lbuea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000080, OPCODE_MASK_H4, lbuea, memory_load_inst },
- {"lhu", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000000, OPCODE_MASK_H4, lhu, memory_load_inst },
- {"lhur", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000200, OPCODE_MASK_H4, lhur, memory_load_inst },
-+ {"lhuea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000080, OPCODE_MASK_H4, lhuea, memory_load_inst },
- {"lw", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000000, OPCODE_MASK_H4, lw, memory_load_inst },
- {"lwr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000200, OPCODE_MASK_H4, lwr, memory_load_inst },
- {"lwx", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000400, OPCODE_MASK_H4, lwx, memory_load_inst },
-+ {"lwea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000080, OPCODE_MASK_H4, lwea, memory_load_inst },
- {"sb", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000000, OPCODE_MASK_H4, sb, memory_store_inst },
- {"sbr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000200, OPCODE_MASK_H4, sbr, memory_store_inst },
-+ {"sbea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000080, OPCODE_MASK_H4, sbea, memory_store_inst },
- {"sh", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000000, OPCODE_MASK_H4, sh, memory_store_inst },
- {"shr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000200, OPCODE_MASK_H4, shr, memory_store_inst },
-+ {"shea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000080, OPCODE_MASK_H4, shea, memory_store_inst },
- {"sw", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000000, OPCODE_MASK_H4, sw, memory_store_inst },
- {"swr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000200, OPCODE_MASK_H4, swr, memory_store_inst },
- {"swx", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000400, OPCODE_MASK_H4, swx, memory_store_inst },
-+ {"swea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000080, OPCODE_MASK_H4, swea, memory_store_inst },
- {"lbui", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE0000000, OPCODE_MASK_H, lbui, memory_load_inst },
- {"lhui", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE4000000, OPCODE_MASK_H, lhui, memory_load_inst },
- {"lwi", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE8000000, OPCODE_MASK_H, lwi, memory_load_inst },
-@@ -405,6 +414,8 @@ struct op_code_struct
- {"clz", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900000E0, OPCODE_MASK_H34, clz, special_inst },
- {"mbar", INST_TYPE_IMM5, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB8020004, OPCODE_MASK_HN, mbar, special_inst },
- {"sleep", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBA020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 16. */
-+ {"hibernate", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB9020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 8. */
-+ {"suspend", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBB020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 24. */
- {"swapb", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E0, OPCODE_MASK_H4, swapb, arithmetic_inst },
- {"swaph", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E2, OPCODE_MASK_H4, swaph, arithmetic_inst },
- {"", 0, 0, 0, 0, 0, 0, 0, 0},
-diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
-index 7338f6a..c75f10a 100644
---- a/opcodes/microblaze-opcm.h
-+++ b/opcodes/microblaze-opcm.h
-@@ -33,13 +33,13 @@ enum microblaze_instr
- /* 'or/and/xor' are C++ keywords. */
- microblaze_or, microblaze_and, microblaze_xor,
- andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
-- wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, br,
-- brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt,
-- bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni,
-+ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, wdcclearea, mts, mtse,
-+ mfs, mfse, mbar, br, brd, brld, bra, brad, brald, microblaze_brk, beq, beqd,
-+ bne, bned, blt, bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni,
- imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid,
- brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti,
-- bgtid, bgei, bgeid, lbu, lbur, lhu, lhur, lw, lwr, lwx, sb, sbr, sh,
-- shr, sw, swr, swx, lbui, lhui, lwi,
-+ bgtid, bgei, bgeid, lbu, lbuea, lbur, lhu, lhuea, lhur, lw, lwea, lwr, lwx,
-+ sb, sbea, sbr, sh, shea, shr, sw, swea, swr, swx, lbui, lhui, lwi,
- sbi, shi, swi, msrset, msrclr, tuqula, fadd, frsub, fmul, fdiv,
- fcmp_lt, fcmp_eq, fcmp_le, fcmp_gt, fcmp_ne, fcmp_ge, fcmp_un, flt,
- fint, fsqrt,
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0008-Add-new-MicroBlaze-bit-field-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0008-Add-new-MicroBlaze-bit-field-instructions.patch
deleted file mode 100644
index 0bc0117..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0008-Add-new-MicroBlaze-bit-field-instructions.patch
+++ /dev/null
@@ -1,232 +0,0 @@
-From 5c4dacaae2ba93569c1d37cda9859c57d6649dc0 Mon Sep 17 00:00:00 2001
-From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Date: Mon, 28 Aug 2017 19:54:01 -0700
-Subject: [PATCH] Add new MicroBlaze bit-field instructions
-
-This patches adds new bsefi and bsifi instructions. BSEFI- The
-instruction shall extract a bit field from a register and place it
-right-adjusted in the destination register. The other bits in the
-destination register shall be set to zero BSIFI- The instruction shall
-insert a right-adjusted bit field from a register at another position in
-the destination register. The rest of the bits in the destination
-register shall be unchanged
-
-Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
----
- gas/config/tc-microblaze.c | 71 +++++++++++++++++++++++++++++++++++++++++++++-
- opcodes/microblaze-dis.c | 16 +++++++++++
- opcodes/microblaze-opc.h | 12 +++++++-
- opcodes/microblaze-opcm.h | 6 +++-
- 4 files changed, 102 insertions(+), 3 deletions(-)
-
-diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
-index e135547e62..34cb80fac2 100644
---- a/gas/config/tc-microblaze.c
-+++ b/gas/config/tc-microblaze.c
-@@ -909,7 +909,7 @@ md_assemble (char * str)
- unsigned reg2;
- unsigned reg3;
- unsigned isize;
-- unsigned int immed, temp;
-+ unsigned int immed, immed2, temp;
- expressionS exp;
- char name[20];
-
-@@ -1164,7 +1164,76 @@ md_assemble (char * str)
- inst |= (reg2 << RA_LOW) & RA_MASK;
- inst |= (immed << IMM_LOW) & IMM5_MASK;
- break;
-+ case INST_TYPE_RD_R1_IMM5_IMM5:
-+ if (strcmp (op_end, ""))
-+ op_end = parse_reg (op_end + 1, ®1); /* Get rd. */
-+ else
-+ {
-+ as_fatal (_("Error in statement syntax"));
-+ reg1 = 0;
-+ }
-+ if (strcmp (op_end, ""))
-+ op_end = parse_reg (op_end + 1, ®2); /* Get r1. */
-+ else
-+ {
-+ as_fatal (_("Error in statement syntax"));
-+ reg2 = 0;
-+ }
-+
-+ /* Check for spl registers. */
-+ if (check_spl_reg (®1))
-+ as_fatal (_("Cannot use special register with this instruction"));
-+ if (check_spl_reg (®2))
-+ as_fatal (_("Cannot use special register with this instruction"));
-
-+ /* Width immediate value. */
-+ if (strcmp (op_end, ""))
-+ op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
-+ else
-+ as_fatal (_("Error in statement syntax"));
-+ if (exp.X_op != O_constant)
-+ {
-+ as_warn (_("Symbol used as immediate width value for bit field instruction"));
-+ immed = 1;
-+ }
-+ else
-+ immed = exp.X_add_number;
-+ if (opcode->instr == bsefi && immed > 31)
-+ as_fatal (_("Width value must be less than 32"));
-+
-+ /* Shift immediate value. */
-+ if (strcmp (op_end, ""))
-+ op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
-+ else
-+ as_fatal (_("Error in statement syntax"));
-+ if (exp.X_op != O_constant)
-+ {
-+ as_warn (_("Symbol used as immediate shift value for bit field instruction"));
-+ immed2 = 0;
-+ }
-+ else
-+ {
-+ output = frag_more (isize);
-+ immed2 = exp.X_add_number;
-+ }
-+ if (immed2 != (immed2 % 32))
-+ {
-+ as_warn (_("Shift value greater than 32. using <value %% 32>"));
-+ immed2 = immed2 % 32;
-+ }
-+
-+ /* Check combined value. */
-+ if (immed + immed2 > 32)
-+ as_fatal (_("Width value + shift value must not be greater than 32"));
-+
-+ inst |= (reg1 << RD_LOW) & RD_MASK;
-+ inst |= (reg2 << RA_LOW) & RA_MASK;
-+ if (opcode->instr == bsefi)
-+ inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
-+ else
-+ inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
-+ inst |= (immed2 << IMM_LOW) & IMM5_MASK;
-+ break;
- case INST_TYPE_R1_R2:
- if (strcmp (op_end, ""))
- op_end = parse_reg (op_end + 1, ®1); /* Get r1. */
-diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
-index 6a174b0eb9..80a47ad2fc 100644
---- a/opcodes/microblaze-dis.c
-+++ b/opcodes/microblaze-dis.c
-@@ -73,6 +73,18 @@ get_field_imm5_mbar (long instr)
- return(strdup(tmpstr));
- }
-
-+static char *
-+get_field_imm5width (long instr)
-+{
-+ char tmpstr[25];
-+
-+ if (instr & 0x00004000)
-+ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
-+ else
-+ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
-+ return (strdup (tmpstr));
-+}
-+
- static char *
- get_field_rfsl (long instr)
- {
-@@ -396,6 +408,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
- /* For mbar 16 or sleep insn. */
- case INST_TYPE_NONE:
- break;
-+ /* For bit field insns. */
-+ case INST_TYPE_RD_R1_IMM5_IMM5:
-+ print_func (stream, "\t%s, %s, %s, %s", get_field_rd (inst),get_field_r1(inst),get_field_imm5width (inst), get_field_imm5 (inst));
-+ break;
- /* For tuqula instruction */
- case INST_TYPE_RD:
- print_func (stream, "\t%s", get_field_rd (inst));
-diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
-index a64f8362da..afb34989d9 100644
---- a/opcodes/microblaze-opc.h
-+++ b/opcodes/microblaze-opc.h
-@@ -59,6 +59,9 @@
- /* For mbar. */
- #define INST_TYPE_IMM5 20
-
-+/* For bsefi and bsifi */
-+#define INST_TYPE_RD_R1_IMM5_IMM5 21
-+
- #define INST_TYPE_NONE 25
-
-
-@@ -89,7 +92,9 @@
- #define OPCODE_MASK_H124 0xFFFF07FF /* High 16, and low 11 bits. */
- #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits. */
- #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */
-+#define OPCODE_MASK_H3B 0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */
- #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */
-+#define OPCODE_MASK_H32B 0xFC00C000 /* High 6 bits and bit 16, 17. */
- #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */
- #define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */
- #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */
-@@ -102,7 +107,7 @@
- #define DELAY_SLOT 1
- #define NO_DELAY_SLOT 0
-
--#define MAX_OPCODES 299
-+#define MAX_OPCODES 301
-
- struct op_code_struct
- {
-@@ -159,6 +164,8 @@ struct op_code_struct
- {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
- {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
- {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
-+ {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
-+ {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
- {"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
- {"and", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
- {"xor", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
-@@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr";
- #define MIN_IMM5 ((int) 0x00000000)
- #define MAX_IMM5 ((int) 0x0000001f)
-
-+#define MIN_IMM_WIDTH ((int) 0x00000001)
-+#define MAX_IMM_WIDTH ((int) 0x00000020)
-+
- #endif /* MICROBLAZE_OPC */
-
-diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
-index 21a3dc8d76..dd6be7f65c 100644
---- a/opcodes/microblaze-opcm.h
-+++ b/opcodes/microblaze-opcm.h
-@@ -29,7 +29,7 @@ enum microblaze_instr
- addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
- mulh, mulhu, mulhsu,swapb,swaph,
- idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
-- ncget, ncput, muli, bslli, bsrai, bsrli, mului,
-+ ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
- /* 'or/and/xor' are C++ keywords. */
- microblaze_or, microblaze_and, microblaze_xor,
- andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
-@@ -129,6 +129,7 @@ enum microblaze_instr_type
- #define RB_LOW 11 /* Low bit for RB. */
- #define IMM_LOW 0 /* Low bit for immediate. */
- #define IMM_MBAR 21 /* low bit for mbar instruction. */
-+#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
-
- #define RD_MASK 0x03E00000
- #define RA_MASK 0x001F0000
-@@ -141,6 +142,9 @@ enum microblaze_instr_type
- /* Imm mask for mbar. */
- #define IMM5_MBAR_MASK 0x03E00000
-
-+/* Imm mask for extract/insert width. */
-+#define IMM5_WIDTH_MASK 0x000007C0
-+
- /* FSL imm mask for get, put instructions. */
- #define RFSL_MASK 0x000000F
-
---
-2.15.0
-
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0009-Fixing-MicroBlaze-IMM-bug.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0009-Fixing-MicroBlaze-IMM-bug.patch
deleted file mode 100644
index bb7e91c..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0009-Fixing-MicroBlaze-IMM-bug.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From f649406ccaea992f3931e0d9ca9fbd6efb0c553b Mon Sep 17 00:00:00 2001
-From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Date: Mon, 28 Aug 2017 19:54:02 -0700
-Subject: [PATCH] Fixing MicroBlaze IMM bug
-
-Fixing the imm bug. with relax option imm -1 is also getting removed this is corrected now.
-
-Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
-
----
- bfd/elf32-microblaze.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
-index a94799f..74b00d2 100644
---- a/bfd/elf32-microblaze.c
-+++ b/bfd/elf32-microblaze.c
-@@ -1789,8 +1789,7 @@ microblaze_elf_relax_section (bfd *abfd,
- else
- symval += irel->r_addend;
-
-- if ((symval & 0xffff8000) == 0
-- || (symval & 0xffff8000) == 0xffff8000)
-+ if ((symval & 0xffff8000) == 0)
- {
- /* We can delete this instruction. */
- sec->relax[sec->relax_count].addr = irel->r_offset;
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch
deleted file mode 100644
index 077343e..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From e1bacaa7c1aa387f167afff74876c5acdffc39d9 Mon Sep 17 00:00:00 2001
-From: Mahesh Bodapati <mbodapat at xilinx.com>
-Date: Wed, 15 Nov 2017 17:45:35 -0800
-Subject: [PATCH] Fixed bug in GCC so that it will support .long 0U and .long
- 0u
-
-Signed-off-by: Mahesh Bodapati <mbodapat at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
-
----
- gas/expr.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/gas/expr.c b/gas/expr.c
-index 3e28af6..0b7cc76 100644
---- a/gas/expr.c
-+++ b/gas/expr.c
-@@ -810,6 +810,15 @@ operand (expressionS *expressionP, enum expr_mode mode)
- break;
- }
- }
-+ if ((*input_line_pointer == 'U') || (*input_line_pointer == 'u'))
-+ {
-+ input_line_pointer--;
-+
-+ integer_constant ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
-+ ? 0 : 10,
-+ expressionP);
-+ break;
-+ }
- c = *input_line_pointer;
- switch (c)
- {
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0011-Fixing-MicroBlaze-constant-range-check-issue.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0011-Fixing-MicroBlaze-constant-range-check-issue.patch
deleted file mode 100644
index 244a7ad..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0011-Fixing-MicroBlaze-constant-range-check-issue.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 9393a3e346d2ccbb86761117260c1dd89070a507 Mon Sep 17 00:00:00 2001
-From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Date: Wed, 15 Nov 2017 17:45:34 -0800
-Subject: [PATCH] Fixing MicroBlaze constant range check issue
-
-Sample error: not in range ffffffff80000000..7fffffff, not ffffffff70000000
-
-Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Pending
-
----
- gas/config/tc-microblaze.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
-index 21a5a0c..c614556 100644
---- a/gas/config/tc-microblaze.c
-+++ b/gas/config/tc-microblaze.c
-@@ -749,7 +749,7 @@ parse_imm (char * s, expressionS * e, offsetT min, offsetT max)
- if ((e->X_add_number >> 31) == 1)
- e->X_add_number |= -((addressT) (1U << 31));
-
-- if (e->X_add_number < min || e->X_add_number > max)
-+ if ((int)e->X_add_number < min || (int)e->X_add_number > max)
- {
- as_fatal (_("operand must be absolute in range %lx..%lx, not %lx"),
- (long) min, (long) max, (long) e->X_add_number);
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch
deleted file mode 100644
index e340c50..0000000
--- a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 732b5a44a0a032da5ebb775b5df2ee2a36af988f Mon Sep 17 00:00:00 2001
-From: Nathan Rossi <nathan at nathanrossi.com>
-Date: Sun, 5 Nov 2017 22:17:39 +1000
-Subject: [PATCH] MicroBlaze fix mask for barrel shift instructions
-
-As of v10.0 the bsi (bslli/bsrai/bsrli/bsefi/bsifi) instructions have
-bits 16 and 17 defined as 'Insert' and 'Extract' respectively to support
-bit field insert/extract operations. For the bslli/bsrai/bsrli
-instructions these bits must be 0, as such update the opcode mask so
-that the bslli/bsrai/bsrli instructions do not also match the bsefi and
-bsifi instructions.
-
-Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
-Upstream-Status: Pending
-
----
- opcodes/microblaze-opc.h | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
-index 4bc400a..9482d81 100644
---- a/opcodes/microblaze-opc.h
-+++ b/opcodes/microblaze-opc.h
-@@ -161,9 +161,9 @@ struct op_code_struct
- {"ncget", INST_TYPE_RD_RFSL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x6C006000, OPCODE_MASK_H32, ncget, anyware_inst },
- {"ncput", INST_TYPE_R1_RFSL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x6C00E000, OPCODE_MASK_H32, ncput, anyware_inst },
- {"muli", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x60000000, OPCODE_MASK_H, muli, mult_inst },
-- {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
-- {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
-- {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
-+ {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3B, bslli, barrel_shift_inst },
-+ {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3B, bsrai, barrel_shift_inst },
-+ {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3B, bsrli, barrel_shift_inst },
- {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
- {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
- {"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch
new file mode 100644
index 0000000..878bb32
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0001-MicroBlaze-Add-wdc.ext.clear-and-wdc.ext.flush-insns.patch
@@ -0,0 +1,65 @@
+From 91f39b692c48336117c092e4afd80899c97779e6 Mon Sep 17 00:00:00 2001
+From: David Holsgrove <david.holsgrove at xilinx.com>
+Date: Mon, 28 Aug 2017 19:53:52 -0700
+Subject: [PATCH] MicroBlaze Add wdc.ext.clear and wdc.ext.flush insns
+
+Added two new instructions, wdc.ext.clear and wdc.ext.flush,
+to enable MicroBlaze to flush an external cache, which is
+used with the new coherency support for multiprocessing.
+
+Signed-off-by: David Holsgrove <david.holsgrove at xilinx.com>
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+
+---
+ opcodes/microblaze-opc.h | 5 ++++-
+ opcodes/microblaze-opcm.h | 4 ++--
+ 2 files changed, 6 insertions(+), 3 deletions(-)
+
+diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
+index ede8af8..773dc81 100644
+--- a/opcodes/microblaze-opc.h
++++ b/opcodes/microblaze-opc.h
+@@ -91,6 +91,7 @@
+ #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */
+ #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */
+ #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */
++#define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */
+ #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */
+
+ /* New Mask for msrset, msrclr insns. */
+@@ -101,7 +102,7 @@
+ #define DELAY_SLOT 1
+ #define NO_DELAY_SLOT 0
+
+-#define MAX_OPCODES 289
++#define MAX_OPCODES 291
+
+ struct op_code_struct
+ {
+@@ -174,7 +175,9 @@ struct op_code_struct
+ {"wic", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000068, OPCODE_MASK_H34B, wic, special_inst },
+ {"wdc", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000064, OPCODE_MASK_H34B, wdc, special_inst },
+ {"wdc.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000066, OPCODE_MASK_H34B, wdcclear, special_inst },
++ {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst },
+ {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst },
++ {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst },
+ {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst },
+ {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst },
+ {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst },
+diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
+index 92f3f19..7338f6a 100644
+--- a/opcodes/microblaze-opcm.h
++++ b/opcodes/microblaze-opcm.h
+@@ -33,8 +33,8 @@ enum microblaze_instr
+ /* 'or/and/xor' are C++ keywords. */
+ microblaze_or, microblaze_and, microblaze_xor,
+ andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
+- wic, wdc, wdcclear, wdcflush, mts, mfs, mbar, br, brd,
+- brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt,
++ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, br,
++ brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt,
+ bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni,
+ imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid,
+ brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti,
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch
new file mode 100644
index 0000000..edeecfd
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0002-MicroBlaze-add-mlittle-endian-and-mbig-endian-flags.patch
@@ -0,0 +1,64 @@
+From 8b733a61ab54ba4cedb234020562502d20eebcbb Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Date: Mon, 28 Aug 2017 19:53:53 -0700
+Subject: [PATCH] MicroBlaze add mlittle-endian and mbig-endian flags
+
+Added support in gas for mlittle-endian and mbig-endian flags
+as options.
+
+Updated show usage for MicroBlaze specific assembler options
+to include new entries.
+
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Signed-off-by: David Holsgrove <david.holsgrove at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+
+---
+ gas/config/tc-microblaze.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
+index 0194cd9..42dd7ae 100644
+--- a/gas/config/tc-microblaze.c
++++ b/gas/config/tc-microblaze.c
+@@ -37,6 +37,8 @@
+
+ #define OPTION_EB (OPTION_MD_BASE + 0)
+ #define OPTION_EL (OPTION_MD_BASE + 1)
++#define OPTION_LITTLE (OPTION_MD_BASE + 2)
++#define OPTION_BIG (OPTION_MD_BASE + 3)
+
+ void microblaze_generate_symbol (char *sym);
+ static bfd_boolean check_spl_reg (unsigned *);
+@@ -1837,6 +1839,8 @@ struct option md_longopts[] =
+ {
+ {"EB", no_argument, NULL, OPTION_EB},
+ {"EL", no_argument, NULL, OPTION_EL},
++ {"mlittle-endian", no_argument, NULL, OPTION_LITTLE},
++ {"mbig-endian", no_argument, NULL, OPTION_BIG},
+ { NULL, no_argument, NULL, 0}
+ };
+
+@@ -2471,9 +2475,11 @@ md_parse_option (int c, const char * arg ATTRIBUTE_UNUSED)
+ switch (c)
+ {
+ case OPTION_EB:
++ case OPTION_BIG:
+ target_big_endian = 1;
+ break;
+ case OPTION_EL:
++ case OPTION_LITTLE:
+ target_big_endian = 0;
+ break;
+ default:
+@@ -2488,6 +2494,9 @@ md_show_usage (FILE * stream ATTRIBUTE_UNUSED)
+ /* fprintf(stream, _("\
+ MicroBlaze options:\n\
+ -noSmall Data in the comm and data sections do not go into the small data section\n")); */
++ fprintf (stream, _(" MicroBlaze specific assembler options:\n"));
++ fprintf (stream, " -%-23s%s\n", "mbig-endian", N_("assemble for a big endian cpu"));
++ fprintf (stream, " -%-23s%s\n", "mlittle-endian", N_("assemble for a little endian cpu"));
+ }
+
+
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0003-Disable-the-warning-message-for-eh_frame_hdr.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0003-Disable-the-warning-message-for-eh_frame_hdr.patch
new file mode 100644
index 0000000..aee0c01
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0003-Disable-the-warning-message-for-eh_frame_hdr.patch
@@ -0,0 +1,39 @@
+From dac72d809be9faf9380b181df0c19a2c6d744c54 Mon Sep 17 00:00:00 2001
+From: "Edgar E. Iglesias" <edgar.iglesias at gmail.com>
+Date: Mon, 28 Aug 2017 19:53:54 -0700
+Subject: [PATCH] Disable the warning message for eh_frame_hdr
+
+Upstream-Status: Inappropriate [workaround]
+
+Rebased to 2.31
+ - Error hanlder changed
+
+Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>
+Signed-off-by: Edgar E. Iglesias <edgar.iglesias at gmail.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+
+---
+ bfd/elf-eh-frame.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+Index: git/bfd/elf-eh-frame.c
+===================================================================
+--- git.orig/bfd/elf-eh-frame.c
++++ git/bfd/elf-eh-frame.c
+@@ -1042,10 +1042,13 @@ _bfd_elf_parse_eh_frame (bfd *abfd, stru
+ goto success;
+
+ free_no_table:
+- _bfd_error_handler
++ /* FIXME: Remove the microblaze specifics when relaxing gets fixed. */
++ if (bfd_get_arch(abfd) != bfd_arch_microblaze) {
+ /* xgettext:c-format */
+- (_("error in %pB(%pA); no .eh_frame_hdr table will be created"),
+- abfd, sec);
++ _bfd_error_handler
++ (_("error in %pB(%pA); no .eh_frame_hdr table will be created"),
++ abfd, sec);
++ }
+ hdr_info->u.dwarf.table = FALSE;
+ if (sec_info)
+ free (sec_info);
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0004-Fix-relaxation-of-assembler-resolved-references.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0004-Fix-relaxation-of-assembler-resolved-references.patch
new file mode 100644
index 0000000..b543c54
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0004-Fix-relaxation-of-assembler-resolved-references.patch
@@ -0,0 +1,81 @@
+From 927ef228dfedf229dc915b273a308ab2c7bf9e19 Mon Sep 17 00:00:00 2001
+From: "Edgar E. Iglesias" <edgar.iglesias at gmail.com>
+Date: Mon, 28 Aug 2017 19:53:55 -0700
+Subject: [PATCH] Fix relaxation of assembler resolved references
+
+03/2018
+Rebased for binutils 2.30
+
+Signed-off-by: Edgar E. Iglesias <edgar.iglesias at gmail.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>
+
+Upstream-Status: Pending
+
+---
+ bfd/elf32-microblaze.c | 39 +++++++++++++++++++++++++++++++++++++++
+ gas/config/tc-microblaze.c | 1 +
+ 2 files changed, 40 insertions(+)
+
+diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
+index f1808bc..a1d810c 100644
+--- a/bfd/elf32-microblaze.c
++++ b/bfd/elf32-microblaze.c
+@@ -1887,6 +1887,45 @@ microblaze_elf_relax_section (bfd *abfd,
+ irelscanend = irelocs + o->reloc_count;
+ for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
+ {
++ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE)
++ {
++ unsigned int val;
++
++ isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
++
++ /* This was a PC-relative instruction that was completely resolved. */
++ if (ocontents == NULL)
++ {
++ if (elf_section_data (o)->this_hdr.contents != NULL)
++ ocontents = elf_section_data (o)->this_hdr.contents;
++ else
++ {
++ /* We always cache the section contents.
++ Perhaps, if info->keep_memory is FALSE, we
++ should free them, if we are permitted to. */
++
++ if (o->rawsize == 0)
++ o->rawsize = o->size;
++ ocontents = (bfd_byte *) bfd_malloc (o->rawsize);
++ if (ocontents == NULL)
++ goto error_return;
++ if (!bfd_get_section_contents (abfd, o, ocontents,
++ (file_ptr) 0,
++ o->rawsize))
++ goto error_return;
++ elf_section_data (o)->this_hdr.contents = ocontents;
++ }
++ }
++
++ irelscan->r_addend -= calc_fixup (irelscan->r_addend
++ + isym->st_value, sec);
++ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
++ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset,
++ irelscan->r_addend);
++ }
++ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) {
++ fprintf(stderr, "Unhandled NONE 64\n");
++ }
+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
+ {
+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
+index 42dd7ae..50dbfc7 100644
+--- a/gas/config/tc-microblaze.c
++++ b/gas/config/tc-microblaze.c
+@@ -2183,6 +2183,7 @@ md_apply_fix (fixS * fixP,
+ else
+ fixP->fx_r_type = BFD_RELOC_NONE;
+ fixP->fx_addsy = section_symbol (absolute_section);
++ fixP->fx_done = 0;
+ }
+ return;
+ }
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch
new file mode 100644
index 0000000..6cdd2cc
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0005-Fixup-MicroBlaze-debug_loc-sections-after-linker-rel.patch
@@ -0,0 +1,243 @@
+From 5bf68bc39976903929f730b6eed18686c3563c05 Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Date: Mon, 28 Aug 2017 19:53:56 -0700
+Subject: [PATCH] Fixup MicroBlaze debug_loc sections after linker relaxation
+
+Fixup debug_loc sections after linker relaxation Adds a new reloctype
+R_MICROBLAZE_32_NONE, used for passing reloc info from the assembler to
+the linker when the linker manages to fully resolve a local symbol
+reference.
+
+This is a workaround for design flaws in the assembler to
+linker interface with regards to linker relaxation.
+
+08/2018
+Rebased for binutils 2.31
+ - Some RELOC_NUMBERs were added upstream, rebased to use 33 instead of 30
+
+Signed-off-by: Edgar E. Iglesias <edgar.iglesias at gmail.com>
+Signed-off-by: Nagaraju Mekala <nmekala at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr at xilinx.com>
+
+Upstream-Status: Pending
+
+---
+ bfd/bfd-in2.h | 9 +++++++--
+ bfd/elf32-microblaze.c | 45 ++++++++++++++++++++++++++++++++++++++-------
+ bfd/libbfd.h | 1 +
+ bfd/reloc.c | 6 ++++++
+ binutils/readelf.c | 4 ++++
+ gas/config/tc-microblaze.c | 5 ++++-
+ include/elf/microblaze.h | 1 +
+ 7 files changed, 61 insertions(+), 10 deletions(-)
+
+Index: git/bfd/bfd-in2.h
+===================================================================
+--- git.orig/bfd/bfd-in2.h
++++ git/bfd/bfd-in2.h
+@@ -5791,10 +5791,15 @@ value relative to the read-write small d
+ expressions of the form "Symbol Op Symbol" */
+ BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
+
+-/* This is a 64 bit reloc that stores the 32 bit pc relative
++/* This is a 32 bit reloc that stores the 32 bit pc relative
+ value in two words (with an imm instruction). No relocation is
+ done here - only used for relaxing */
+- BFD_RELOC_MICROBLAZE_64_NONE,
++ BFD_RELOC_MICROBLAZE_32_NONE,
++
++/* This is a 64 bit reloc that stores the 32 bit pc relative
++ * +value in two words (with an imm instruction). No relocation is
++ * +done here - only used for relaxing */
++ BFD_RELOC_MICROBLAZE_64_NONE,
+
+ /* This is a 64 bit reloc that stores the 32 bit pc relative
+ value in two words (with an imm instruction). The relocation is
+Index: git/bfd/elf32-microblaze.c
+===================================================================
+--- git.orig/bfd/elf32-microblaze.c
++++ git/bfd/elf32-microblaze.c
+@@ -176,6 +176,20 @@ static reloc_howto_type microblaze_elf_h
+ 0x0000ffff, /* Dest Mask. */
+ FALSE), /* PC relative offset? */
+
++ HOWTO (R_MICROBLAZE_32_NONE, /* Type. */
++ 0, /* Rightshift. */
++ 2, /* Size (0 = byte, 1 = short, 2 = long). */
++ 32, /* Bitsize. */
++ TRUE, /* PC_relative. */
++ 0, /* Bitpos. */
++ complain_overflow_bitfield, /* Complain on overflow. */
++ NULL, /* Special Function. */
++ "R_MICROBLAZE_32_NONE",/* Name. */
++ FALSE, /* Partial Inplace. */
++ 0, /* Source Mask. */
++ 0, /* Dest Mask. */
++ FALSE), /* PC relative offset? */
++
+ /* This reloc does nothing. Used for relaxation. */
+ HOWTO (R_MICROBLAZE_64_NONE, /* Type. */
+ 0, /* Rightshift. */
+@@ -562,6 +576,9 @@ microblaze_elf_reloc_type_lookup (bfd *
+ case BFD_RELOC_NONE:
+ microblaze_reloc = R_MICROBLAZE_NONE;
+ break;
++ case BFD_RELOC_MICROBLAZE_32_NONE:
++ microblaze_reloc = R_MICROBLAZE_32_NONE;
++ break;
+ case BFD_RELOC_MICROBLAZE_64_NONE:
+ microblaze_reloc = R_MICROBLAZE_64_NONE;
+ break;
+@@ -1918,14 +1935,23 @@ microblaze_elf_relax_section (bfd *abfd,
+ }
+ break;
+ case R_MICROBLAZE_NONE:
++ case R_MICROBLAZE_32_NONE:
+ {
+ /* This was a PC-relative instruction that was
+ completely resolved. */
+ int sfix, efix;
++ unsigned int val;
+ bfd_vma target_address;
+ target_address = irel->r_addend + irel->r_offset;
+ sfix = calc_fixup (irel->r_offset, 0, sec);
+ efix = calc_fixup (target_address, 0, sec);
++
++ /* Validate the in-band val. */
++ val = bfd_get_32 (abfd, contents + irel->r_offset);
++ if (val != irel->r_addend && ELF32_R_TYPE (irel->r_info) == R_MICROBLAZE_32_NONE) {
++ fprintf(stderr, "%d: CORRUPT relax reloc %x %lx\n", __LINE__, val, irel->r_addend);
++ }
++
+ irel->r_addend -= (efix - sfix);
+ /* Should use HOWTO. */
+ microblaze_bfd_write_imm_value_32 (abfd, contents + irel->r_offset,
+@@ -1973,12 +1999,16 @@ microblaze_elf_relax_section (bfd *abfd,
+ irelscanend = irelocs + o->reloc_count;
+ for (irelscan = irelocs; irelscan < irelscanend; irelscan++)
+ {
+- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_NONE)
++ if (1 && ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32_NONE)
+ {
+ unsigned int val;
+
+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+
++ /* hax: We only do the following fixup for debug location lists. */
++ if (strcmp(".debug_loc", o->name))
++ continue;
++
+ /* This was a PC-relative instruction that was completely resolved. */
+ if (ocontents == NULL)
+ {
+@@ -2003,15 +2033,16 @@ microblaze_elf_relax_section (bfd *abfd,
+ }
+ }
+
+- irelscan->r_addend -= calc_fixup (irelscan->r_addend
+- + isym->st_value, sec);
+ val = bfd_get_32 (abfd, ocontents + irelscan->r_offset);
++
++ if (val != irelscan->r_addend) {
++ fprintf(stderr, "%d: CORRUPT relax reloc! %x %lx\n", __LINE__, val, irelscan->r_addend);
++ }
++ irelscan->r_addend -= calc_fixup (irelscan->r_addend, 0, sec);
++
+ microblaze_bfd_write_imm_value_32 (abfd, ocontents + irelscan->r_offset,
+ irelscan->r_addend);
+ }
+- if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_64_NONE) {
+- fprintf(stderr, "Unhandled NONE 64\n");
+- }
+ if (ELF32_R_TYPE (irelscan->r_info) == (int) R_MICROBLAZE_32)
+ {
+ isym = isymbuf + ELF32_R_SYM (irelscan->r_info);
+@@ -2071,7 +2102,7 @@ microblaze_elf_relax_section (bfd *abfd,
+ elf_section_data (o)->this_hdr.contents = ocontents;
+ }
+ }
+- irelscan->r_addend -= calc_fixup (irel->r_addend
++ irelscan->r_addend -= calc_fixup (irelscan->r_addend
+ + isym->st_value,
+ 0,
+ sec);
+Index: git/bfd/libbfd.h
+===================================================================
+--- git.orig/bfd/libbfd.h
++++ git/bfd/libbfd.h
+@@ -2862,6 +2862,7 @@ static const char *const bfd_reloc_code_
+ "BFD_RELOC_MICROBLAZE_32_ROSDA",
+ "BFD_RELOC_MICROBLAZE_32_RWSDA",
+ "BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM",
++ "BFD_RELOC_MICROBLAZE_32_NONE",
+ "BFD_RELOC_MICROBLAZE_64_NONE",
+ "BFD_RELOC_MICROBLAZE_64_GOTPC",
+ "BFD_RELOC_MICROBLAZE_64_GOT",
+Index: git/bfd/reloc.c
+===================================================================
+--- git.orig/bfd/reloc.c
++++ git/bfd/reloc.c
+@@ -6865,6 +6865,12 @@ ENUMDOC
+ This is a 32 bit reloc for the microblaze to handle
+ expressions of the form "Symbol Op Symbol"
+ ENUM
++ BFD_RELOC_MICROBLAZE_32_NONE
++ENUMDOC
++ This is a 32 bit reloc that stores the 32 bit pc relative
++ value in two words (with an imm instruction). No relocation is
++ done here - only used for relaxing
++ENUM
+ BFD_RELOC_MICROBLAZE_64_NONE
+ ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit pc relative
+Index: git/binutils/readelf.c
+===================================================================
+--- git.orig/binutils/readelf.c
++++ git/binutils/readelf.c
+@@ -12908,6 +12908,10 @@ is_none_reloc (Filedata * filedata, unsi
+ || reloc_type == 32 /* R_AVR_DIFF32. */);
+ case EM_METAG:
+ return reloc_type == 3; /* R_METAG_NONE. */
++ case EM_MICROBLAZE:
++ return reloc_type == 33 /* R_MICROBLAZE_32_NONE. */
++ || reloc_type == 0 /* R_MICROBLAZE_NONE. */
++ || reloc_type == 9; /* R_MICROBLAZE_64_NONE. */
+ case EM_NDS32:
+ return (reloc_type == 0 /* R_XTENSA_NONE. */
+ || reloc_type == 204 /* R_NDS32_DIFF8. */
+Index: git/gas/config/tc-microblaze.c
+===================================================================
+--- git.orig/gas/config/tc-microblaze.c
++++ git/gas/config/tc-microblaze.c
+@@ -2201,7 +2201,9 @@ md_apply_fix (fixS * fixP,
+ /* This fixup has been resolved. Create a reloc in case the linker
+ moves code around due to relaxing. */
+ if (fixP->fx_r_type == BFD_RELOC_64_PCREL)
+- fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
++ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE;
++ else if (fixP->fx_r_type == BFD_RELOC_32)
++ fixP->fx_r_type = BFD_RELOC_MICROBLAZE_32_NONE;
+ else
+ fixP->fx_r_type = BFD_RELOC_NONE;
+ fixP->fx_addsy = section_symbol (absolute_section);
+@@ -2426,6 +2428,7 @@ tc_gen_reloc (asection * section ATTRIBU
+ switch (fixp->fx_r_type)
+ {
+ case BFD_RELOC_NONE:
++ case BFD_RELOC_MICROBLAZE_32_NONE:
+ case BFD_RELOC_MICROBLAZE_64_NONE:
+ case BFD_RELOC_32:
+ case BFD_RELOC_MICROBLAZE_32_LO:
+Index: git/include/elf/microblaze.h
+===================================================================
+--- git.orig/include/elf/microblaze.h
++++ git/include/elf/microblaze.h
+@@ -61,6 +61,7 @@ START_RELOC_NUMBERS (elf_microblaze_relo
+ RELOC_NUMBER (R_MICROBLAZE_TEXTPCREL_64, 30) /* PC-relative TEXT offset. */
+ RELOC_NUMBER (R_MICROBLAZE_TEXTREL_64, 31) /* TEXT Entry offset 64-bit. */
+ RELOC_NUMBER (R_MICROBLAZE_TEXTREL_32_LO, 32) /* TEXT Entry offset 32-bit. */
++ RELOC_NUMBER (R_MICROBLAZE_32_NONE, 33)
+ END_RELOC_NUMBERS (R_MICROBLAZE_max)
+
+ /* Global base address names. */
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch
new file mode 100644
index 0000000..8d3d538
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0006-Fix-bug-in-MicroBlaze-TLSTPREL-Relocation.patch
@@ -0,0 +1,35 @@
+From ca0336a49c33ccb78962530f2affff8982027e8e Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Date: Mon, 28 Aug 2017 19:53:58 -0700
+Subject: [PATCH] Fix bug in MicroBlaze TLSTPREL Relocation
+
+Fixed the problem related to the fixup/relocations TLSTPREL.
+When the fixup is applied the addend is not added at the correct offset
+of the instruction. The offset is hard coded considering its big endian
+and it fails for Little endian. This patch allows support for both
+big & little-endian compilers
+
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+
+---
+ bfd/elf32-microblaze.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
+index 1dc56f7..d4e53de 100644
+--- a/bfd/elf32-microblaze.c
++++ b/bfd/elf32-microblaze.c
+@@ -1451,9 +1451,9 @@ microblaze_elf_relocate_section (bfd *output_bfd,
+ relocation += addend;
+ relocation -= dtprel_base(info);
+ bfd_put_16 (input_bfd, (relocation >> 16) & 0xffff,
+- contents + offset + 2);
++ contents + offset + endian);
+ bfd_put_16 (input_bfd, relocation & 0xffff,
+- contents + offset + 2 + INST_WORD_SIZE);
++ contents + offset + endian + INST_WORD_SIZE);
+ break;
+ case (int) R_MICROBLAZE_TEXTREL_64:
+ case (int) R_MICROBLAZE_TEXTREL_32_LO:
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0007-Add-MicroBlaze-address-extension-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0007-Add-MicroBlaze-address-extension-instructions.patch
new file mode 100644
index 0000000..9672c51
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0007-Add-MicroBlaze-address-extension-instructions.patch
@@ -0,0 +1,104 @@
+From 3895968b5c55321d203cadb7630a2baee8699e17 Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Date: Mon, 28 Aug 2017 19:53:59 -0700
+Subject: [PATCH] Add MicroBlaze address extension instructions
+
+This patch adds the support of new instructions which are required
+for supporting Address extension feature.
+
+2016-01-18 Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+
+ * microblaze-opc.h (op_code_struct): Added new instructions
+ * microblaze-opcm.h (microblaze_instr): Added new instructions
+
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+
+---
+ opcodes/microblaze-opc.h | 13 ++++++++++++-
+ opcodes/microblaze-opcm.h | 10 +++++-----
+ 2 files changed, 17 insertions(+), 6 deletions(-)
+
+diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
+index 773dc81..4e69f76 100644
+--- a/opcodes/microblaze-opc.h
++++ b/opcodes/microblaze-opc.h
+@@ -102,7 +102,7 @@
+ #define DELAY_SLOT 1
+ #define NO_DELAY_SLOT 0
+
+-#define MAX_OPCODES 291
++#define MAX_OPCODES 299
+
+ struct op_code_struct
+ {
+@@ -178,8 +178,11 @@ struct op_code_struct
+ {"wdc.ext.clear", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000466, OPCODE_MASK_H35B, wdcextclear, special_inst },
+ {"wdc.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000074, OPCODE_MASK_H34B, wdcflush, special_inst },
+ {"wdc.ext.flush", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x90000476, OPCODE_MASK_H35B, wdcextflush, special_inst },
++ {"wdc.clear.ea", INST_TYPE_R1_R2_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900000E6, OPCODE_MASK_H34B, wdcclearea, special_inst },
+ {"mts", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9400C000, OPCODE_MASK_H13S, mts, special_inst },
++ {"mtse", INST_TYPE_SPECIAL_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MTS, 0x9500C000, OPCODE_MASK_H13S, mtse,special_inst },
+ {"mfs", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94008000, OPCODE_MASK_H23S, mfs, special_inst },
++ {"mfse", INST_TYPE_RD_SPECIAL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_MFS, 0x94088000, OPCODE_MASK_H23S, mfse, special_inst },
+ {"br", INST_TYPE_R2, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98000000, OPCODE_MASK_H124, br, branch_inst },
+ {"brd", INST_TYPE_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98100000, OPCODE_MASK_H124, brd, branch_inst },
+ {"brld", INST_TYPE_RD_R2, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x98140000, OPCODE_MASK_H24, brld, branch_inst },
+@@ -229,18 +232,24 @@ struct op_code_struct
+ {"bgeid", INST_TYPE_R1_IMM, INST_PC_OFFSET, DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBEA00000, OPCODE_MASK_H1, bgeid, branch_inst },
+ {"lbu", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000000, OPCODE_MASK_H4, lbu, memory_load_inst },
+ {"lbur", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000200, OPCODE_MASK_H4, lbur, memory_load_inst },
++ {"lbuea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC0000080, OPCODE_MASK_H4, lbuea, memory_load_inst },
+ {"lhu", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000000, OPCODE_MASK_H4, lhu, memory_load_inst },
+ {"lhur", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000200, OPCODE_MASK_H4, lhur, memory_load_inst },
++ {"lhuea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC4000080, OPCODE_MASK_H4, lhuea, memory_load_inst },
+ {"lw", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000000, OPCODE_MASK_H4, lw, memory_load_inst },
+ {"lwr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000200, OPCODE_MASK_H4, lwr, memory_load_inst },
+ {"lwx", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000400, OPCODE_MASK_H4, lwx, memory_load_inst },
++ {"lwea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xC8000080, OPCODE_MASK_H4, lwea, memory_load_inst },
+ {"sb", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000000, OPCODE_MASK_H4, sb, memory_store_inst },
+ {"sbr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000200, OPCODE_MASK_H4, sbr, memory_store_inst },
++ {"sbea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD0000080, OPCODE_MASK_H4, sbea, memory_store_inst },
+ {"sh", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000000, OPCODE_MASK_H4, sh, memory_store_inst },
+ {"shr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000200, OPCODE_MASK_H4, shr, memory_store_inst },
++ {"shea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD4000080, OPCODE_MASK_H4, shea, memory_store_inst },
+ {"sw", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000000, OPCODE_MASK_H4, sw, memory_store_inst },
+ {"swr", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000200, OPCODE_MASK_H4, swr, memory_store_inst },
+ {"swx", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000400, OPCODE_MASK_H4, swx, memory_store_inst },
++ {"swea", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xD8000080, OPCODE_MASK_H4, swea, memory_store_inst },
+ {"lbui", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE0000000, OPCODE_MASK_H, lbui, memory_load_inst },
+ {"lhui", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE4000000, OPCODE_MASK_H, lhui, memory_load_inst },
+ {"lwi", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xE8000000, OPCODE_MASK_H, lwi, memory_load_inst },
+@@ -405,6 +414,8 @@ struct op_code_struct
+ {"clz", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900000E0, OPCODE_MASK_H34, clz, special_inst },
+ {"mbar", INST_TYPE_IMM5, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB8020004, OPCODE_MASK_HN, mbar, special_inst },
+ {"sleep", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBA020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 16. */
++ {"hibernate", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xB9020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 8. */
++ {"suspend", INST_TYPE_NONE, INST_PC_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0xBB020004, OPCODE_MASK_HN, invalid_inst, special_inst }, /* translates to mbar 24. */
+ {"swapb", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E0, OPCODE_MASK_H4, swapb, arithmetic_inst },
+ {"swaph", INST_TYPE_RD_R1, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x900001E2, OPCODE_MASK_H4, swaph, arithmetic_inst },
+ {"", 0, 0, 0, 0, 0, 0, 0, 0},
+diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
+index 7338f6a..c75f10a 100644
+--- a/opcodes/microblaze-opcm.h
++++ b/opcodes/microblaze-opcm.h
+@@ -33,13 +33,13 @@ enum microblaze_instr
+ /* 'or/and/xor' are C++ keywords. */
+ microblaze_or, microblaze_and, microblaze_xor,
+ andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
+- wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, mts, mfs, mbar, br,
+- brd, brld, bra, brad, brald, microblaze_brk, beq, beqd, bne, bned, blt,
+- bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni,
++ wic, wdc, wdcclear, wdcextclear, wdcflush, wdcextflush, wdcclearea, mts, mtse,
++ mfs, mfse, mbar, br, brd, brld, bra, brad, brald, microblaze_brk, beq, beqd,
++ bne, bned, blt, bltd, ble, bled, bgt, bgtd, bge, bged, ori, andi, xori, andni,
+ imm, rtsd, rtid, rtbd, rted, bri, brid, brlid, brai, braid, bralid,
+ brki, beqi, beqid, bnei, bneid, blti, bltid, blei, bleid, bgti,
+- bgtid, bgei, bgeid, lbu, lbur, lhu, lhur, lw, lwr, lwx, sb, sbr, sh,
+- shr, sw, swr, swx, lbui, lhui, lwi,
++ bgtid, bgei, bgeid, lbu, lbuea, lbur, lhu, lhuea, lhur, lw, lwea, lwr, lwx,
++ sb, sbea, sbr, sh, shea, shr, sw, swea, swr, swx, lbui, lhui, lwi,
+ sbi, shi, swi, msrset, msrclr, tuqula, fadd, frsub, fmul, fdiv,
+ fcmp_lt, fcmp_eq, fcmp_le, fcmp_gt, fcmp_ne, fcmp_ge, fcmp_un, flt,
+ fint, fsqrt,
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0008-Add-new-MicroBlaze-bit-field-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0008-Add-new-MicroBlaze-bit-field-instructions.patch
new file mode 100644
index 0000000..0bc0117
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0008-Add-new-MicroBlaze-bit-field-instructions.patch
@@ -0,0 +1,232 @@
+From 5c4dacaae2ba93569c1d37cda9859c57d6649dc0 Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Date: Mon, 28 Aug 2017 19:54:01 -0700
+Subject: [PATCH] Add new MicroBlaze bit-field instructions
+
+This patches adds new bsefi and bsifi instructions. BSEFI- The
+instruction shall extract a bit field from a register and place it
+right-adjusted in the destination register. The other bits in the
+destination register shall be set to zero BSIFI- The instruction shall
+insert a right-adjusted bit field from a register at another position in
+the destination register. The rest of the bits in the destination
+register shall be unchanged
+
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+---
+ gas/config/tc-microblaze.c | 71 +++++++++++++++++++++++++++++++++++++++++++++-
+ opcodes/microblaze-dis.c | 16 +++++++++++
+ opcodes/microblaze-opc.h | 12 +++++++-
+ opcodes/microblaze-opcm.h | 6 +++-
+ 4 files changed, 102 insertions(+), 3 deletions(-)
+
+diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
+index e135547e62..34cb80fac2 100644
+--- a/gas/config/tc-microblaze.c
++++ b/gas/config/tc-microblaze.c
+@@ -909,7 +909,7 @@ md_assemble (char * str)
+ unsigned reg2;
+ unsigned reg3;
+ unsigned isize;
+- unsigned int immed, temp;
++ unsigned int immed, immed2, temp;
+ expressionS exp;
+ char name[20];
+
+@@ -1164,7 +1164,76 @@ md_assemble (char * str)
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM5_MASK;
+ break;
++ case INST_TYPE_RD_R1_IMM5_IMM5:
++ if (strcmp (op_end, ""))
++ op_end = parse_reg (op_end + 1, ®1); /* Get rd. */
++ else
++ {
++ as_fatal (_("Error in statement syntax"));
++ reg1 = 0;
++ }
++ if (strcmp (op_end, ""))
++ op_end = parse_reg (op_end + 1, ®2); /* Get r1. */
++ else
++ {
++ as_fatal (_("Error in statement syntax"));
++ reg2 = 0;
++ }
++
++ /* Check for spl registers. */
++ if (check_spl_reg (®1))
++ as_fatal (_("Cannot use special register with this instruction"));
++ if (check_spl_reg (®2))
++ as_fatal (_("Cannot use special register with this instruction"));
+
++ /* Width immediate value. */
++ if (strcmp (op_end, ""))
++ op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
++ else
++ as_fatal (_("Error in statement syntax"));
++ if (exp.X_op != O_constant)
++ {
++ as_warn (_("Symbol used as immediate width value for bit field instruction"));
++ immed = 1;
++ }
++ else
++ immed = exp.X_add_number;
++ if (opcode->instr == bsefi && immed > 31)
++ as_fatal (_("Width value must be less than 32"));
++
++ /* Shift immediate value. */
++ if (strcmp (op_end, ""))
++ op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
++ else
++ as_fatal (_("Error in statement syntax"));
++ if (exp.X_op != O_constant)
++ {
++ as_warn (_("Symbol used as immediate shift value for bit field instruction"));
++ immed2 = 0;
++ }
++ else
++ {
++ output = frag_more (isize);
++ immed2 = exp.X_add_number;
++ }
++ if (immed2 != (immed2 % 32))
++ {
++ as_warn (_("Shift value greater than 32. using <value %% 32>"));
++ immed2 = immed2 % 32;
++ }
++
++ /* Check combined value. */
++ if (immed + immed2 > 32)
++ as_fatal (_("Width value + shift value must not be greater than 32"));
++
++ inst |= (reg1 << RD_LOW) & RD_MASK;
++ inst |= (reg2 << RA_LOW) & RA_MASK;
++ if (opcode->instr == bsefi)
++ inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
++ else
++ inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
++ inst |= (immed2 << IMM_LOW) & IMM5_MASK;
++ break;
+ case INST_TYPE_R1_R2:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, ®1); /* Get r1. */
+diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
+index 6a174b0eb9..80a47ad2fc 100644
+--- a/opcodes/microblaze-dis.c
++++ b/opcodes/microblaze-dis.c
+@@ -73,6 +73,18 @@ get_field_imm5_mbar (long instr)
+ return(strdup(tmpstr));
+ }
+
++static char *
++get_field_imm5width (long instr)
++{
++ char tmpstr[25];
++
++ if (instr & 0x00004000)
++ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
++ else
++ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
++ return (strdup (tmpstr));
++}
++
+ static char *
+ get_field_rfsl (long instr)
+ {
+@@ -396,6 +408,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
+ /* For mbar 16 or sleep insn. */
+ case INST_TYPE_NONE:
+ break;
++ /* For bit field insns. */
++ case INST_TYPE_RD_R1_IMM5_IMM5:
++ print_func (stream, "\t%s, %s, %s, %s", get_field_rd (inst),get_field_r1(inst),get_field_imm5width (inst), get_field_imm5 (inst));
++ break;
+ /* For tuqula instruction */
+ case INST_TYPE_RD:
+ print_func (stream, "\t%s", get_field_rd (inst));
+diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
+index a64f8362da..afb34989d9 100644
+--- a/opcodes/microblaze-opc.h
++++ b/opcodes/microblaze-opc.h
+@@ -59,6 +59,9 @@
+ /* For mbar. */
+ #define INST_TYPE_IMM5 20
+
++/* For bsefi and bsifi */
++#define INST_TYPE_RD_R1_IMM5_IMM5 21
++
+ #define INST_TYPE_NONE 25
+
+
+@@ -89,7 +92,9 @@
+ #define OPCODE_MASK_H124 0xFFFF07FF /* High 16, and low 11 bits. */
+ #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits. */
+ #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */
++#define OPCODE_MASK_H3B 0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */
+ #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */
++#define OPCODE_MASK_H32B 0xFC00C000 /* High 6 bits and bit 16, 17. */
+ #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */
+ #define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */
+ #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */
+@@ -102,7 +107,7 @@
+ #define DELAY_SLOT 1
+ #define NO_DELAY_SLOT 0
+
+-#define MAX_OPCODES 299
++#define MAX_OPCODES 301
+
+ struct op_code_struct
+ {
+@@ -159,6 +164,8 @@ struct op_code_struct
+ {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
+ {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
+ {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
++ {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
++ {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
+ {"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
+ {"and", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
+ {"xor", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
+@@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr";
+ #define MIN_IMM5 ((int) 0x00000000)
+ #define MAX_IMM5 ((int) 0x0000001f)
+
++#define MIN_IMM_WIDTH ((int) 0x00000001)
++#define MAX_IMM_WIDTH ((int) 0x00000020)
++
+ #endif /* MICROBLAZE_OPC */
+
+diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
+index 21a3dc8d76..dd6be7f65c 100644
+--- a/opcodes/microblaze-opcm.h
++++ b/opcodes/microblaze-opcm.h
+@@ -29,7 +29,7 @@ enum microblaze_instr
+ addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
+ mulh, mulhu, mulhsu,swapb,swaph,
+ idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
+- ncget, ncput, muli, bslli, bsrai, bsrli, mului,
++ ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
+ /* 'or/and/xor' are C++ keywords. */
+ microblaze_or, microblaze_and, microblaze_xor,
+ andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
+@@ -129,6 +129,7 @@ enum microblaze_instr_type
+ #define RB_LOW 11 /* Low bit for RB. */
+ #define IMM_LOW 0 /* Low bit for immediate. */
+ #define IMM_MBAR 21 /* low bit for mbar instruction. */
++#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
+
+ #define RD_MASK 0x03E00000
+ #define RA_MASK 0x001F0000
+@@ -141,6 +142,9 @@ enum microblaze_instr_type
+ /* Imm mask for mbar. */
+ #define IMM5_MBAR_MASK 0x03E00000
+
++/* Imm mask for extract/insert width. */
++#define IMM5_WIDTH_MASK 0x000007C0
++
+ /* FSL imm mask for get, put instructions. */
+ #define RFSL_MASK 0x000000F
+
+--
+2.15.0
+
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0009-Fixing-MicroBlaze-IMM-bug.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0009-Fixing-MicroBlaze-IMM-bug.patch
new file mode 100644
index 0000000..bb7e91c
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0009-Fixing-MicroBlaze-IMM-bug.patch
@@ -0,0 +1,29 @@
+From f649406ccaea992f3931e0d9ca9fbd6efb0c553b Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Date: Mon, 28 Aug 2017 19:54:02 -0700
+Subject: [PATCH] Fixing MicroBlaze IMM bug
+
+Fixing the imm bug. with relax option imm -1 is also getting removed this is corrected now.
+
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+
+---
+ bfd/elf32-microblaze.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
+index a94799f..74b00d2 100644
+--- a/bfd/elf32-microblaze.c
++++ b/bfd/elf32-microblaze.c
+@@ -1789,8 +1789,7 @@ microblaze_elf_relax_section (bfd *abfd,
+ else
+ symval += irel->r_addend;
+
+- if ((symval & 0xffff8000) == 0
+- || (symval & 0xffff8000) == 0xffff8000)
++ if ((symval & 0xffff8000) == 0)
+ {
+ /* We can delete this instruction. */
+ sec->relax[sec->relax_count].addr = irel->r_offset;
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch
new file mode 100644
index 0000000..077343e
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0010-Fixed-bug-in-GCC-so-that-it-will-support-.long-0U-an.patch
@@ -0,0 +1,34 @@
+From e1bacaa7c1aa387f167afff74876c5acdffc39d9 Mon Sep 17 00:00:00 2001
+From: Mahesh Bodapati <mbodapat at xilinx.com>
+Date: Wed, 15 Nov 2017 17:45:35 -0800
+Subject: [PATCH] Fixed bug in GCC so that it will support .long 0U and .long
+ 0u
+
+Signed-off-by: Mahesh Bodapati <mbodapat at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+
+---
+ gas/expr.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/gas/expr.c b/gas/expr.c
+index 3e28af6..0b7cc76 100644
+--- a/gas/expr.c
++++ b/gas/expr.c
+@@ -810,6 +810,15 @@ operand (expressionS *expressionP, enum expr_mode mode)
+ break;
+ }
+ }
++ if ((*input_line_pointer == 'U') || (*input_line_pointer == 'u'))
++ {
++ input_line_pointer--;
++
++ integer_constant ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
++ ? 0 : 10,
++ expressionP);
++ break;
++ }
+ c = *input_line_pointer;
+ switch (c)
+ {
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0011-Fixing-MicroBlaze-constant-range-check-issue.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0011-Fixing-MicroBlaze-constant-range-check-issue.patch
new file mode 100644
index 0000000..244a7ad
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0011-Fixing-MicroBlaze-constant-range-check-issue.patch
@@ -0,0 +1,28 @@
+From 9393a3e346d2ccbb86761117260c1dd89070a507 Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Date: Wed, 15 Nov 2017 17:45:34 -0800
+Subject: [PATCH] Fixing MicroBlaze constant range check issue
+
+Sample error: not in range ffffffff80000000..7fffffff, not ffffffff70000000
+
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala at xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
+Upstream-Status: Pending
+
+---
+ gas/config/tc-microblaze.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
+index 21a5a0c..c614556 100644
+--- a/gas/config/tc-microblaze.c
++++ b/gas/config/tc-microblaze.c
+@@ -749,7 +749,7 @@ parse_imm (char * s, expressionS * e, offsetT min, offsetT max)
+ if ((e->X_add_number >> 31) == 1)
+ e->X_add_number |= -((addressT) (1U << 31));
+
+- if (e->X_add_number < min || e->X_add_number > max)
++ if ((int)e->X_add_number < min || (int)e->X_add_number > max)
+ {
+ as_fatal (_("operand must be absolute in range %lx..%lx, not %lx"),
+ (long) min, (long) max, (long) e->X_add_number);
diff --git a/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch
new file mode 100644
index 0000000..e340c50
--- /dev/null
+++ b/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0012-MicroBlaze-fix-mask-for-barrel-shift-instructions.patch
@@ -0,0 +1,36 @@
+From 732b5a44a0a032da5ebb775b5df2ee2a36af988f Mon Sep 17 00:00:00 2001
+From: Nathan Rossi <nathan at nathanrossi.com>
+Date: Sun, 5 Nov 2017 22:17:39 +1000
+Subject: [PATCH] MicroBlaze fix mask for barrel shift instructions
+
+As of v10.0 the bsi (bslli/bsrai/bsrli/bsefi/bsifi) instructions have
+bits 16 and 17 defined as 'Insert' and 'Extract' respectively to support
+bit field insert/extract operations. For the bslli/bsrai/bsrli
+instructions these bits must be 0, as such update the opcode mask so
+that the bslli/bsrai/bsrli instructions do not also match the bsefi and
+bsifi instructions.
+
+Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
+Upstream-Status: Pending
+
+---
+ opcodes/microblaze-opc.h | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
+index 4bc400a..9482d81 100644
+--- a/opcodes/microblaze-opc.h
++++ b/opcodes/microblaze-opc.h
+@@ -161,9 +161,9 @@ struct op_code_struct
+ {"ncget", INST_TYPE_RD_RFSL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x6C006000, OPCODE_MASK_H32, ncget, anyware_inst },
+ {"ncput", INST_TYPE_R1_RFSL, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x6C00E000, OPCODE_MASK_H32, ncput, anyware_inst },
+ {"muli", INST_TYPE_RD_R1_IMM, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x60000000, OPCODE_MASK_H, muli, mult_inst },
+- {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
+- {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
+- {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
++ {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3B, bslli, barrel_shift_inst },
++ {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3B, bsrai, barrel_shift_inst },
++ {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3B, bsrli, barrel_shift_inst },
+ {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
+ {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
+ {"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
--
2.7.4
More information about the meta-xilinx
mailing list