[meta-xilinx] [meta-xilinx-bsp][PATCH v4 1/3] Remove 2017.3 component recipes
Manjukumar Matha
manjukumar.harthikote-matha at xilinx.com
Mon May 21 17:53:58 PDT 2018
Remove 2017.3 based component recipes
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
---
Changelog:
v4: First submission
.../arm-trusted-firmware_2017.3.bb | 5 -
...mp-Setup-partid-for-QEMU-to-match-silicon.patch | 33 -
...aze-kc705-Convert-microblaze-generic-to-k.patch | 1181 --------------------
.../recipes-bsp/u-boot/u-boot-xlnx_2017.3.bb | 26 -
.../qemu/qemu-devicetrees_2017.3.bb | 4 -
.../recipes-devtools/qemu/qemu-xilinx_2017.3.bb | 5 -
.../recipes-kernel/linux/linux-xlnx_2017.3.bb | 6 -
...rm-xilinx-Add-encoder-for-Digilent-boards.patch | 302 -----
...002-clk-Add-driver-for-axi_dynclk-IP-Core.patch | 607 ----------
...0003-drm-xilinx-Fix-DPMS-transition-to-on.patch | 54 -
.../linux/linux-xlnx_2017.3.bbappend | 8 -
11 files changed, 2231 deletions(-)
delete mode 100644 meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2017.3.bb
delete mode 100644 meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/arm64-zynqmp-Setup-partid-for-QEMU-to-match-silicon.patch
delete mode 100644 meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
delete mode 100644 meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2017.3.bb
delete mode 100644 meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2017.3.bb
delete mode 100644 meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2017.3.bb
delete mode 100644 meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2017.3.bb
delete mode 100644 meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch
delete mode 100644 meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch
delete mode 100644 meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch
delete mode 100644 meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2017.3.bbappend
diff --git a/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2017.3.bb b/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2017.3.bb
deleted file mode 100644
index a9d4669..0000000
--- a/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2017.3.bb
+++ /dev/null
@@ -1,5 +0,0 @@
-ATF_VERSION = "1.3"
-XILINX_RELEASE_VERSION = "v2017.3"
-SRCREV ?= "f9b244beaa7ac6a670b192192b6e92e5fd6044dc"
-
-include arm-trusted-firmware.inc
diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/arm64-zynqmp-Setup-partid-for-QEMU-to-match-silicon.patch b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/arm64-zynqmp-Setup-partid-for-QEMU-to-match-silicon.patch
deleted file mode 100644
index d8261e6..0000000
--- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/arm64-zynqmp-Setup-partid-for-QEMU-to-match-silicon.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 777ac896daaffeaa2fac2bdb424a96def7409a4b Mon Sep 17 00:00:00 2001
-From: Nathan Rossi <nathan at nathanrossi.com>
-Date: Wed, 18 Oct 2017 21:29:47 +1000
-Subject: [PATCH] arm64: zynqmp: Setup partid for QEMU to match silicon
-
-During board late init the environment is 'setup' to set the partid to 0
-for QEMU. Change this so that QEMU targets behave just like silicon and
-emulation targets such that partid is set to auto.
-
-Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
-Upstream-Status: Submitted [sent to git at xilinx.com]
----
- board/xilinx/zynqmp/zynqmp.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
-index fd80844df6..2df66a4b75 100644
---- a/board/xilinx/zynqmp/zynqmp.c
-+++ b/board/xilinx/zynqmp/zynqmp.c
-@@ -294,9 +294,9 @@ int board_late_init(void)
- setenv("setup", "setenv baudrate 4800 && setenv bootcmd run veloce");
- case ZYNQMP_CSU_VERSION_EP108:
- case ZYNQMP_CSU_VERSION_SILICON:
-+ case ZYNQMP_CSU_VERSION_QEMU:
- setenv("setup", "setenv partid auto");
- break;
-- case ZYNQMP_CSU_VERSION_QEMU:
- default:
- setenv("setup", "setenv partid 0");
- }
---
-2.15.0
-
diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
deleted file mode 100644
index 99e2a64..0000000
--- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2017.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
+++ /dev/null
@@ -1,1181 +0,0 @@
-From cb4350d00089c0e133ef18d2b662e18ab82a14c6 Mon Sep 17 00:00:00 2001
-From: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Date: Tue, 8 Aug 2017 10:34:28 -0700
-Subject: [PATCH] kc705-microblazeel: Convert microblaze-generic to kc705-microblazeel
-
-This is an update to earlier kc705-trd patch done by Nathan Rossi. Starting
-from v2016.1, KC705 will no longer refer to deprecated KC705 TRD application.
-
-Change the microblaze-generic board to match the kc705-microblazeel. This patch
-is not intended for upstream and serves as an intermediate solution
-until OF support in upstream u-boot allows for easy support for custom
-microblaze boards.
-
-Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
-Upstream-Status: Not-Upstreamable [meta-xilinx/kc705 specific]
----
- arch/microblaze/dts/microblaze-generic.dts | 570 ++++++++++++++++++++++++++++-
- board/xilinx/microblaze-generic/config.mk | 30 +-
- configs/microblaze-generic_defconfig | 27 +-
- include/configs/microblaze-generic.h | 470 +++++++++---------------
- 4 files changed, 754 insertions(+), 343 deletions(-)
-
-diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts
-index 08a1396..879bacd 100644
---- a/arch/microblaze/dts/microblaze-generic.dts
-+++ b/arch/microblaze/dts/microblaze-generic.dts
-@@ -1,9 +1,567 @@
- /dts-v1/;
-+
- / {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- aliases {
-- } ;
-+ #address-cells = <0x1>;
-+ #size-cells = <0x1>;
-+ compatible = "xlnx,microblaze";
-+ model = "Xilinx MicroBlaze";
-+ hard-reset-gpios = <0x1 0x0 0x1>;
-+
-+ cpus {
-+ #address-cells = <0x1>;
-+ #cpus = <0x1>;
-+ #size-cells = <0x0>;
-+
-+ cpu at 0 {
-+ bus-handle = <0x2>;
-+ clock-frequency = <0xbebc200>;
-+ clocks = <0x3>;
-+ compatible = "xlnx,microblaze-10.0";
-+ d-cache-baseaddr = <0x80000000>;
-+ d-cache-highaddr = <0xbfffffff>;
-+ d-cache-line-size = <0x20>;
-+ d-cache-size = <0x4000>;
-+ device_type = "cpu";
-+ i-cache-baseaddr = <0x80000000>;
-+ i-cache-highaddr = <0xbfffffff>;
-+ i-cache-line-size = <0x10>;
-+ i-cache-size = <0x4000>;
-+ interrupt-handle = <0x4>;
-+ model = "microblaze,10.0";
-+ timebase-frequency = <0xbebc200>;
-+ xlnx,addr-size = <0x20>;
-+ xlnx,addr-tag-bits = <0x10>;
-+ xlnx,allow-dcache-wr = <0x1>;
-+ xlnx,allow-icache-wr = <0x1>;
-+ xlnx,area-optimized = <0x0>;
-+ xlnx,async-interrupt = <0x1>;
-+ xlnx,async-wakeup = <0x3>;
-+ xlnx,avoid-primitives = <0x0>;
-+ xlnx,base-vectors = <0x0>;
-+ xlnx,branch-target-cache-size = <0x0>;
-+ xlnx,cache-byte-size = <0x4000>;
-+ xlnx,d-axi = <0x1>;
-+ xlnx,d-lmb = <0x1>;
-+ xlnx,d-lmb-mon = <0x0>;
-+ xlnx,daddr-size = <0x20>;
-+ xlnx,data-size = <0x20>;
-+ xlnx,dc-axi-mon = <0x0>;
-+ xlnx,dcache-addr-tag = <0x10>;
-+ xlnx,dcache-always-used = <0x1>;
-+ xlnx,dcache-byte-size = <0x4000>;
-+ xlnx,dcache-data-width = <0x0>;
-+ xlnx,dcache-force-tag-lutram = <0x0>;
-+ xlnx,dcache-line-len = <0x8>;
-+ xlnx,dcache-use-writeback = <0x0>;
-+ xlnx,dcache-victims = <0x0>;
-+ xlnx,debug-counter-width = <0x20>;
-+ xlnx,debug-enabled = <0x1>;
-+ xlnx,debug-event-counters = <0x5>;
-+ xlnx,debug-external-trace = <0x0>;
-+ xlnx,debug-interface = <0x0>;
-+ xlnx,debug-latency-counters = <0x1>;
-+ xlnx,debug-profile-size = <0x0>;
-+ xlnx,debug-trace-async-reset = <0x0>;
-+ xlnx,debug-trace-size = <0x2000>;
-+ xlnx,div-zero-exception = <0x1>;
-+ xlnx,dp-axi-mon = <0x0>;
-+ xlnx,dynamic-bus-sizing = <0x0>;
-+ xlnx,ecc-use-ce-exception = <0x0>;
-+ xlnx,edge-is-positive = <0x1>;
-+ xlnx,enable-discrete-ports = <0x0>;
-+ xlnx,endianness = <0x1>;
-+ xlnx,fault-tolerant = <0x0>;
-+ xlnx,fpu-exception = <0x0>;
-+ xlnx,freq = <0xbebc200>;
-+ xlnx,fsl-exception = <0x0>;
-+ xlnx,fsl-links = <0x0>;
-+ xlnx,i-axi = <0x0>;
-+ xlnx,i-lmb = <0x1>;
-+ xlnx,i-lmb-mon = <0x0>;
-+ xlnx,iaddr-size = <0x20>;
-+ xlnx,ic-axi-mon = <0x0>;
-+ xlnx,icache-always-used = <0x1>;
-+ xlnx,icache-data-width = <0x0>;
-+ xlnx,icache-force-tag-lutram = <0x0>;
-+ xlnx,icache-line-len = <0x4>;
-+ xlnx,icache-streams = <0x1>;
-+ xlnx,icache-victims = <0x8>;
-+ xlnx,ill-opcode-exception = <0x1>;
-+ xlnx,imprecise-exceptions = <0x0>;
-+ xlnx,instr-size = <0x20>;
-+ xlnx,interconnect = <0x2>;
-+ xlnx,interrupt-is-edge = <0x0>;
-+ xlnx,interrupt-mon = <0x0>;
-+ xlnx,ip-axi-mon = <0x0>;
-+ xlnx,lockstep-master = <0x0>;
-+ xlnx,lockstep-select = <0x0>;
-+ xlnx,lockstep-slave = <0x0>;
-+ xlnx,mmu-dtlb-size = <0x4>;
-+ xlnx,mmu-itlb-size = <0x2>;
-+ xlnx,mmu-privileged-instr = <0x0>;
-+ xlnx,mmu-tlb-access = <0x3>;
-+ xlnx,mmu-zones = <0x2>;
-+ xlnx,num-sync-ff-clk = <0x2>;
-+ xlnx,num-sync-ff-clk-debug = <0x2>;
-+ xlnx,num-sync-ff-clk-irq = <0x1>;
-+ xlnx,num-sync-ff-dbg-clk = <0x1>;
-+ xlnx,num-sync-ff-dbg-trace-clk = <0x2>;
-+ xlnx,number-of-pc-brk = <0x1>;
-+ xlnx,number-of-rd-addr-brk = <0x0>;
-+ xlnx,number-of-wr-addr-brk = <0x0>;
-+ xlnx,opcode-0x0-illegal = <0x1>;
-+ xlnx,optimization = <0x0>;
-+ xlnx,pc-width = <0x20>;
-+ xlnx,piaddr-size = <0x20>;
-+ xlnx,pvr = <0x2>;
-+ xlnx,pvr-user1 = <0x0>;
-+ xlnx,pvr-user2 = <0x0>;
-+ xlnx,reset-msr = <0x0>;
-+ xlnx,reset-msr-bip = <0x0>;
-+ xlnx,reset-msr-dce = <0x0>;
-+ xlnx,reset-msr-ee = <0x0>;
-+ xlnx,reset-msr-eip = <0x0>;
-+ xlnx,reset-msr-ice = <0x0>;
-+ xlnx,reset-msr-ie = <0x0>;
-+ xlnx,sco = <0x0>;
-+ xlnx,trace = <0x0>;
-+ xlnx,unaligned-exceptions = <0x1>;
-+ xlnx,use-barrel = <0x1>;
-+ xlnx,use-branch-target-cache = <0x0>;
-+ xlnx,use-config-reset = <0x0>;
-+ xlnx,use-dcache = <0x1>;
-+ xlnx,use-div = <0x1>;
-+ xlnx,use-ext-brk = <0x0>;
-+ xlnx,use-ext-nm-brk = <0x0>;
-+ xlnx,use-extended-fsl-instr = <0x0>;
-+ xlnx,use-fpu = <0x0>;
-+ xlnx,use-hw-mul = <0x2>;
-+ xlnx,use-icache = <0x1>;
-+ xlnx,use-interrupt = <0x2>;
-+ xlnx,use-mmu = <0x3>;
-+ xlnx,use-msr-instr = <0x1>;
-+ xlnx,use-non-secure = <0x0>;
-+ xlnx,use-pcmp-instr = <0x1>;
-+ xlnx,use-reorder-instr = <0x1>;
-+ xlnx,use-stack-protection = <0x0>;
-+ };
-+ };
-+
-+ clocks {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+
-+ clk_cpu at 0 {
-+ #clock-cells = <0x0>;
-+ clock-frequency = <0xbebc200>;
-+ clock-output-names = "clk_cpu";
-+ compatible = "fixed-clock";
-+ reg = <0x0>;
-+ linux,phandle = <0x3>;
-+ phandle = <0x3>;
-+ };
-+
-+ clk_bus_0 at 1 {
-+ #clock-cells = <0x0>;
-+ clock-frequency = <0xbebc200>;
-+ clock-output-names = "clk_bus_0";
-+ compatible = "fixed-clock";
-+ reg = <0x1>;
-+ linux,phandle = <0x8>;
-+ phandle = <0x8>;
-+ };
-+ };
-+
-+ amba_pl {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x1>;
-+ compatible = "simple-bus";
-+ ranges;
-+ linux,phandle = <0x2>;
-+ phandle = <0x2>;
-+
-+ ethernet at 40c00000 {
-+ axistream-connected = <0x5>;
-+ axistream-control-connected = <0x5>;
-+ clock-frequency = <0x5f5e100>;
-+ compatible = "xlnx,axi-ethernet-1.00.a";
-+ device_type = "network";
-+ interrupt-parent = <0x4>;
-+ interrupts = <0x4 0x2>;
-+ phy-mode = "gmii";
-+ reg = <0x40c00000 0x40000>;
-+ xlnx = <0x0>;
-+ xlnx,axiliteclkrate = <0x0>;
-+ xlnx,axisclkrate = <0x0>;
-+ xlnx,clockselection = <0x0>;
-+ xlnx,enableasyncsgmii = <0x0>;
-+ xlnx,gt-type = <0x0>;
-+ xlnx,gtinex = <0x0>;
-+ xlnx,gtlocation = <0x0>;
-+ xlnx,gtrefclksrc = <0x0>;
-+ xlnx,include-dre;
-+ xlnx,instantiatebitslice0 = <0x0>;
-+ xlnx,phy-type = <0x1>;
-+ xlnx,phyaddr = <0x1>;
-+ xlnx,rable = <0x0>;
-+ xlnx,rxcsum = <0x0>;
-+ xlnx,rxlane0-placement = <0x0>;
-+ xlnx,rxlane1-placement = <0x0>;
-+ xlnx,rxmem = <0x1000>;
-+ xlnx,rxnibblebitslice0used = <0x0>;
-+ xlnx,tx-in-upper-nibble = <0x1>;
-+ xlnx,txcsum = <0x0>;
-+ xlnx,txlane0-placement = <0x0>;
-+ xlnx,txlane1-placement = <0x0>;
-+ phy-handle = <0x6>;
-+ local-mac-address = [00 0a 35 00 22 01];
-+ linux,phandle = <0x7>;
-+ phandle = <0x7>;
-+
-+ mdio {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+
-+ phy at 7 {
-+ device_type = "ethernet-phy";
-+ reg = <0x7>;
-+ linux,phandle = <0x6>;
-+ phandle = <0x6>;
-+ };
-+ };
-+ };
-+
-+ dma at 41e00000 {
-+ #dma-cells = <0x1>;
-+ axistream-connected = <0x7>;
-+ axistream-control-connected = <0x7>;
-+ clock-frequency = <0xbebc200>;
-+ clock-names = "s_axi_lite_aclk";
-+ clocks = <0x8>;
-+ compatible = "xlnx,eth-dma";
-+ interrupt-parent = <0x4>;
-+ interrupts = <0x3 0x2 0x2 0x2>;
-+ reg = <0x41e00000 0x10000>;
-+ xlnx,include-dre;
-+ linux,phandle = <0x5>;
-+ phandle = <0x5>;
-+ };
-+
-+ timer at 41c00000 {
-+ clock-frequency = <0xbebc200>;
-+ clocks = <0x8>;
-+ compatible = "xlnx,xps-timer-1.00.a";
-+ interrupt-parent = <0x4>;
-+ interrupts = <0x5 0x2>;
-+ reg = <0x41c00000 0x10000>;
-+ xlnx,count-width = <0x20>;
-+ xlnx,gen0-assert = <0x1>;
-+ xlnx,gen1-assert = <0x1>;
-+ xlnx,one-timer-only = <0x0>;
-+ xlnx,trig0-assert = <0x1>;
-+ xlnx,trig1-assert = <0x1>;
-+ };
-+
-+ gpio at 40010000 {
-+ #gpio-cells = <0x2>;
-+ compatible = "xlnx,xps-gpio-1.00.a";
-+ gpio-controller;
-+ reg = <0x40010000 0x10000>;
-+ xlnx,all-inputs = <0x1>;
-+ xlnx,all-inputs-2 = <0x0>;
-+ xlnx,all-outputs = <0x0>;
-+ xlnx,all-outputs-2 = <0x0>;
-+ xlnx,dout-default = <0x0>;
-+ xlnx,dout-default-2 = <0x0>;
-+ xlnx,gpio-width = <0x1>;
-+ xlnx,gpio2-width = <0x20>;
-+ xlnx,interrupt-present = <0x0>;
-+ xlnx,is-dual = <0x0>;
-+ xlnx,tri-default = <0xffffffff>;
-+ xlnx,tri-default-2 = <0xffffffff>;
-+ };
-+
-+ gpio at 40020000 {
-+ #gpio-cells = <0x2>;
-+ compatible = "xlnx,xps-gpio-1.00.a";
-+ gpio-controller;
-+ reg = <0x40020000 0x10000>;
-+ xlnx,all-inputs = <0x1>;
-+ xlnx,all-inputs-2 = <0x0>;
-+ xlnx,all-outputs = <0x0>;
-+ xlnx,all-outputs-2 = <0x0>;
-+ xlnx,dout-default = <0x0>;
-+ xlnx,dout-default-2 = <0x0>;
-+ xlnx,gpio-width = <0x4>;
-+ xlnx,gpio2-width = <0x20>;
-+ xlnx,interrupt-present = <0x0>;
-+ xlnx,is-dual = <0x0>;
-+ xlnx,tri-default = <0xffffffff>;
-+ xlnx,tri-default-2 = <0xffffffff>;
-+ };
-+
-+ i2c at 40800000 {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+ clock-frequency = <0xbebc200>;
-+ clocks = <0x8>;
-+ compatible = "xlnx,xps-iic-2.00.a";
-+ interrupt-parent = <0x4>;
-+ interrupts = <0x1 0x2>;
-+ reg = <0x40800000 0x10000>;
-+
-+ i2cswitch at 74 {
-+ compatible = "nxp,pca9548";
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+ reg = <0x74>;
-+
-+ i2c at 0 {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+ reg = <0x0>;
-+
-+ clock-generator at 5d {
-+ #clock-cells = <0x0>;
-+ compatible = "silabs,si570";
-+ temperature-stability = <0x32>;
-+ reg = <0x5d>;
-+ factory-fout = <0x9502f90>;
-+ clock-frequency = <0x8d9ee20>;
-+ };
-+ };
-+
-+ i2c at 3 {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+ reg = <0x3>;
-+
-+ eeprom at 54 {
-+ compatible = "at,24c08";
-+ reg = <0x54>;
-+ };
-+ };
-+ };
-+ };
-+
-+ gpio at 40030000 {
-+ #gpio-cells = <0x2>;
-+ compatible = "xlnx,xps-gpio-1.00.a";
-+ gpio-controller;
-+ reg = <0x40030000 0x10000>;
-+ xlnx,all-inputs = <0x0>;
-+ xlnx,all-inputs-2 = <0x0>;
-+ xlnx,all-outputs = <0x1>;
-+ xlnx,all-outputs-2 = <0x0>;
-+ xlnx,dout-default = <0x0>;
-+ xlnx,dout-default-2 = <0x0>;
-+ xlnx,gpio-width = <0x8>;
-+ xlnx,gpio2-width = <0x20>;
-+ xlnx,interrupt-present = <0x0>;
-+ xlnx,is-dual = <0x0>;
-+ xlnx,tri-default = <0xffffffff>;
-+ xlnx,tri-default-2 = <0xffffffff>;
-+ };
-+
-+ flash at 60000000 {
-+ bank-width = <0x2>;
-+ compatible = "cfi-flash";
-+ reg = <0x60000000 0x8000000>;
-+ xlnx,axi-clk-period-ps = <0x1388>;
-+ xlnx,include-datawidth-matching-0 = <0x1>;
-+ xlnx,include-datawidth-matching-1 = <0x1>;
-+ xlnx,include-datawidth-matching-2 = <0x1>;
-+ xlnx,include-datawidth-matching-3 = <0x1>;
-+ xlnx,include-negedge-ioregs = <0x0>;
-+ xlnx,lflash-period-ps = <0x1388>;
-+ xlnx,linear-flash-sync-burst = <0x0>;
-+ xlnx,max-mem-width = <0x10>;
-+ xlnx,mem-a-lsb = <0x0>;
-+ xlnx,mem-a-msb = <0x1f>;
-+ xlnx,mem0-type = <0x2>;
-+ xlnx,mem0-width = <0x10>;
-+ xlnx,mem1-type = <0x0>;
-+ xlnx,mem1-width = <0x10>;
-+ xlnx,mem2-type = <0x0>;
-+ xlnx,mem2-width = <0x10>;
-+ xlnx,mem3-type = <0x0>;
-+ xlnx,mem3-width = <0x10>;
-+ xlnx,num-banks-mem = <0x1>;
-+ xlnx,page-size = <0x10>;
-+ xlnx,parity-type-mem-0 = <0x0>;
-+ xlnx,parity-type-mem-1 = <0x0>;
-+ xlnx,parity-type-mem-2 = <0x0>;
-+ xlnx,parity-type-mem-3 = <0x0>;
-+ xlnx,port-diff = <0x0>;
-+ xlnx,s-axi-en-reg = <0x0>;
-+ xlnx,s-axi-mem-addr-width = <0x20>;
-+ xlnx,s-axi-mem-data-width = <0x20>;
-+ xlnx,s-axi-mem-id-width = <0x1>;
-+ xlnx,s-axi-reg-addr-width = <0x5>;
-+ xlnx,s-axi-reg-data-width = <0x20>;
-+ xlnx,synch-pipedelay-0 = <0x1>;
-+ xlnx,synch-pipedelay-1 = <0x1>;
-+ xlnx,synch-pipedelay-2 = <0x1>;
-+ xlnx,synch-pipedelay-3 = <0x1>;
-+ xlnx,tavdv-ps-mem-0 = <0x1fbd0>;
-+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
-+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
-+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
-+ xlnx,tcedv-ps-mem-0 = <0x1fbd0>;
-+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
-+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
-+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
-+ xlnx,thzce-ps-mem-0 = <0x88b8>;
-+ xlnx,thzce-ps-mem-1 = <0x1b58>;
-+ xlnx,thzce-ps-mem-2 = <0x1b58>;
-+ xlnx,thzce-ps-mem-3 = <0x1b58>;
-+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
-+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
-+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
-+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
-+ xlnx,tlzwe-ps-mem-0 = <0xc350>;
-+ xlnx,tlzwe-ps-mem-1 = <0x0>;
-+ xlnx,tlzwe-ps-mem-2 = <0x0>;
-+ xlnx,tlzwe-ps-mem-3 = <0x0>;
-+ xlnx,tpacc-ps-flash-0 = <0x61a8>;
-+ xlnx,tpacc-ps-flash-1 = <0x61a8>;
-+ xlnx,tpacc-ps-flash-2 = <0x61a8>;
-+ xlnx,tpacc-ps-flash-3 = <0x61a8>;
-+ xlnx,twc-ps-mem-0 = <0x11170>;
-+ xlnx,twc-ps-mem-1 = <0x3a98>;
-+ xlnx,twc-ps-mem-2 = <0x3a98>;
-+ xlnx,twc-ps-mem-3 = <0x3a98>;
-+ xlnx,twp-ps-mem-0 = <0x13880>;
-+ xlnx,twp-ps-mem-1 = <0x2ee0>;
-+ xlnx,twp-ps-mem-2 = <0x2ee0>;
-+ xlnx,twp-ps-mem-3 = <0x2ee0>;
-+ xlnx,twph-ps-mem-0 = <0x13880>;
-+ xlnx,twph-ps-mem-1 = <0x2ee0>;
-+ xlnx,twph-ps-mem-2 = <0x2ee0>;
-+ xlnx,twph-ps-mem-3 = <0x2ee0>;
-+ xlnx,use-startup = <0x0>;
-+ xlnx,use-startup-int = <0x0>;
-+ xlnx,wr-rec-time-mem-0 = <0x186a0>;
-+ xlnx,wr-rec-time-mem-1 = <0x6978>;
-+ xlnx,wr-rec-time-mem-2 = <0x6978>;
-+ xlnx,wr-rec-time-mem-3 = <0x6978>;
-+ #address-cells = <0x1>;
-+ #size-cells = <0x1>;
-+
-+ partition at 0x00000000 {
-+ label = "fpga";
-+ reg = <0x0 0xb00000>;
-+ };
-+
-+ partition at 0x00b00000 {
-+ label = "boot";
-+ reg = <0xb00000 0x80000>;
-+ };
-+
-+ partition at 0x00b80000 {
-+ label = "bootenv";
-+ reg = <0xb80000 0x20000>;
-+ };
-+
-+ partition at 0x00ba0000 {
-+ label = "kernel";
-+ reg = <0xba0000 0xc00000>;
-+ };
-+
-+ partition at 0x017a0000 {
-+ label = "spare";
-+ reg = <0x17a0000 0x0>;
-+ };
-+ };
-+
-+ interrupt-controller at 41200000 {
-+ #interrupt-cells = <0x2>;
-+ compatible = "xlnx,xps-intc-1.00.a";
-+ interrupt-controller;
-+ reg = <0x41200000 0x10000>;
-+ xlnx,kind-of-intr = <0x0>;
-+ xlnx,num-intr-inputs = <0x6>;
-+ linux,phandle = <0x4>;
-+ phandle = <0x4>;
-+ };
-+
-+ gpio at 40040000 {
-+ #gpio-cells = <0x2>;
-+ compatible = "xlnx,xps-gpio-1.00.a";
-+ gpio-controller;
-+ reg = <0x40040000 0x10000>;
-+ xlnx,all-inputs = <0x1>;
-+ xlnx,all-inputs-2 = <0x0>;
-+ xlnx,all-outputs = <0x0>;
-+ xlnx,all-outputs-2 = <0x0>;
-+ xlnx,dout-default = <0x0>;
-+ xlnx,dout-default-2 = <0x0>;
-+ xlnx,gpio-width = <0x5>;
-+ xlnx,gpio2-width = <0x20>;
-+ xlnx,interrupt-present = <0x0>;
-+ xlnx,is-dual = <0x0>;
-+ xlnx,tri-default = <0xffffffff>;
-+ xlnx,tri-default-2 = <0xffffffff>;
-+ };
-+
-+ gpio at 40000000 {
-+ #gpio-cells = <0x2>;
-+ compatible = "xlnx,xps-gpio-1.00.a";
-+ gpio-controller;
-+ reg = <0x40000000 0x10000>;
-+ xlnx,all-inputs = <0x0>;
-+ xlnx,all-inputs-2 = <0x0>;
-+ xlnx,all-outputs = <0x1>;
-+ xlnx,all-outputs-2 = <0x0>;
-+ xlnx,dout-default = <0x0>;
-+ xlnx,dout-default-2 = <0x0>;
-+ xlnx,gpio-width = <0x1>;
-+ xlnx,gpio2-width = <0x20>;
-+ xlnx,interrupt-present = <0x0>;
-+ xlnx,is-dual = <0x0>;
-+ xlnx,tri-default = <0xffffffff>;
-+ xlnx,tri-default-2 = <0xffffffff>;
-+ linux,phandle = <0x1>;
-+ phandle = <0x1>;
-+ };
-+
-+ serial at 44a00000 {
-+ clock-frequency = <0xbebc200>;
-+ clocks = <0x8>;
-+ compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a";
-+ current-speed = <0x1c200>;
-+ device_type = "serial";
-+ interrupt-parent = <0x4>;
-+ interrupts = <0x0 0x2>;
-+ port-number = <0x0>;
-+ reg = <0x44a00000 0x10000>;
-+ reg-offset = <0x1000>;
-+ reg-shift = <0x2>;
-+ xlnx,external-xin-clk-hz = <0x17d7840>;
-+ xlnx,external-xin-clk-hz-d = <0x19>;
-+ xlnx,has-external-rclk = <0x0>;
-+ xlnx,has-external-xin = <0x0>;
-+ xlnx,is-a-16550 = <0x1>;
-+ xlnx,s-axi-aclk-freq-hz-d = "200.0";
-+ xlnx,use-modem-ports = <0x1>;
-+ xlnx,use-user-ports = <0x1>;
-+ };
-+ };
-+
- chosen {
-- } ;
--} ;
-+ bootargs = "console=ttyS0,115200 earlyprintk";
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ aliases {
-+ ethernet0 = "/amba_pl/ethernet at 40c00000";
-+ i2c0 = "/amba_pl/i2c at 40800000";
-+ serial0 = "/amba_pl/serial at 44a00000";
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x80000000 0x40000000>;
-+ };
-+};
-+
-diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk
-index 1dee2d6..cb75fde 100644
---- a/board/xilinx/microblaze-generic/config.mk
-+++ b/board/xilinx/microblaze-generic/config.mk
-@@ -1,20 +1,10 @@
--#
--# (C) Copyright 2007 - 2016 Michal Simek
--#
--# Michal SIMEK <monstr at monstr.eu>
--#
--# SPDX-License-Identifier: GPL-2.0+
--#
--
--CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
--
--# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
--CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
--CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
--CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
--CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
--CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
--
--CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
--
--PLATFORM_CPPFLAGS += $(CPUFLAGS-1) $(CPUFLAGS-2)
-+TEXT_BASE = 0x80400000
-+CONFIG_SYS_TEXT_BASE = 0x80400000
-+
-+PLATFORM_CPPFLAGS += -mxl-barrel-shift
-+PLATFORM_CPPFLAGS += -mno-xl-soft-div
-+PLATFORM_CPPFLAGS += -mxl-pattern-compare
-+PLATFORM_CPPFLAGS += -mxl-multiply-high
-+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-+PLATFORM_CPPFLAGS += -mcpu=v10.0
-+PLATFORM_CPPFLAGS += -fgnu89-inline
-diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
-index 5d13d21..1458ce6 100644
---- a/configs/microblaze-generic_defconfig
-+++ b/configs/microblaze-generic_defconfig
-@@ -7,32 +7,35 @@ CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
- CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
- CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
- CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
--CONFIG_SYS_TEXT_BASE=0x29000000
-+CONFIG_SYS_TEXT_BASE=0x80400000
- CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
- CONFIG_FIT=y
- CONFIG_FIT_VERBOSE=y
--CONFIG_BOOTDELAY=-1
-+CONFIG_BOOTDELAY=4
- CONFIG_SYS_CONSOLE_IS_IN_ENV=y
--CONFIG_SPL=y
--CONFIG_SPL_SYS_MALLOC_SIMPLE=y
- CONFIG_SPL_NOR_SUPPORT=y
- CONFIG_SPL_OS_BOOT=y
- CONFIG_SYS_OS_BASE=0x2c060000
- CONFIG_HUSH_PARSER=y
--CONFIG_SYS_PROMPT="U-Boot-mONStR> "
-+CONFIG_SYS_PROMPT="U-Boot> "
- CONFIG_CMD_ASKENV=y
--CONFIG_CMD_GPIO=y
- # CONFIG_CMD_SETEXPR is not set
--CONFIG_CMD_TFTPPUT=y
-+CONFIG_SYS_ENET=y
-+CONFIG_NET=y
-+CONFIG_NETDEVICES=y
-+CONFIG_CMD_NET=y
- CONFIG_CMD_DHCP=y
-+CONFIG_CMD_NFS=y
- CONFIG_CMD_MII=y
- CONFIG_CMD_PING=y
--CONFIG_SPL_OF_CONTROL=y
- CONFIG_OF_EMBED=y
--CONFIG_NETCONSOLE=y
--CONFIG_SPL_DM=y
- CONFIG_DM_ETH=y
-+CONFIG_SYS_MALLOC_F=y
-+CONFIG_SYS_GENERIC_BOARD=y
- CONFIG_XILINX_AXIEMAC=y
--CONFIG_XILINX_EMACLITE=y
- CONFIG_SYS_NS16550=y
--CONFIG_XILINX_UARTLITE=y
-+CONFIG_CMD_FLASH=y
-+CONFIG_CMD_IMLS=y
-+CONFIG_CMD_GPIO=y
-+CONFIG_CMD_TFTPPUT=y
-+CONFIG_NETCONSOLE=y
-diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
-index 36b0a0e..1227c95 100644
---- a/include/configs/microblaze-generic.h
-+++ b/include/configs/microblaze-generic.h
-@@ -1,319 +1,183 @@
--/*
-- * (C) Copyright 2007-2010 Michal Simek
-- *
-- * Michal SIMEK <monstr at monstr.eu>
-- *
-- * SPDX-License-Identifier: GPL-2.0+
-- */
--
- #ifndef __CONFIG_H
- #define __CONFIG_H
-
--#include "../board/xilinx/microblaze-generic/xparameters.h"
--
--/* MicroBlaze CPU */
--#define MICROBLAZE_V5 1
--
--/* linear and spi flash memory */
--#ifdef XILINX_FLASH_START
--#define FLASH
--#undef SPIFLASH
--#undef RAMENV /* hold environment in flash */
--#else
--#ifdef XILINX_SPI_FLASH_BASEADDR
--#undef FLASH
--#define SPIFLASH
--#undef RAMENV /* hold environment in flash */
--#else
--#undef FLASH
--#undef SPIFLASH
--#define RAMENV /* hold environment in RAM */
--#endif
--#endif
--
--/* uart */
--# define CONFIG_BAUDRATE 115200
--/* The following table includes the supported baudrates */
--# define CONFIG_SYS_BAUDRATE_TABLE \
-- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
--
--/* setting reset address */
--/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
-+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200, 230400}
-
--/* gpio */
--#ifdef XILINX_GPIO_BASEADDR
--# define CONFIG_XILINX_GPIO
--# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
--#endif
--#define CONFIG_BOARD_LATE_INIT
--
--/* watchdog */
--#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
--# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR
--# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ
--# ifndef CONFIG_SPL_BUILD
--# define CONFIG_HW_WATCHDOG
--# define CONFIG_XILINX_TB_WATCHDOG
--# endif
--#endif
--
--#define CONFIG_SYS_MALLOC_LEN 0xC0000
--
--/* Stack location before relocation */
--#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \
-- CONFIG_SYS_MALLOC_F_LEN)
--
--/*
-- * CFI flash memory layout - Example
-- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
-- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
-- *
-- * SECT_SIZE = 0x20000; 128kB is one sector
-- * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
-- *
-- * 0x2200_0000 CONFIG_SYS_FLASH_BASE
-- * FREE 256kB
-- * 0x2204_0000 CONFIG_ENV_ADDR
-- * ENV_AREA 128kB
-- * 0x2206_0000
-- * FREE
-- * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
-- *
-- */
--
--#ifdef FLASH
--# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
--# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
--# define CONFIG_SYS_FLASH_CFI 1
--# define CONFIG_FLASH_CFI_DRIVER 1
--/* ?empty sector */
--# define CONFIG_SYS_FLASH_EMPTY_INFO 1
--/* max number of memory banks */
--# define CONFIG_SYS_MAX_FLASH_BANKS 1
--/* max number of sectors on one chip */
--# define CONFIG_SYS_MAX_FLASH_SECT 512
--/* hardware flash protection */
--# define CONFIG_SYS_FLASH_PROTECTION
--/* use buffered writes (20x faster) */
--# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
--# ifdef RAMENV
--# define CONFIG_ENV_IS_NOWHERE 1
--# define CONFIG_ENV_SIZE 0x1000
--# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--
--# else /* FLASH && !RAMENV */
--# define CONFIG_ENV_IS_IN_FLASH 1
--/* 128K(one sector) for env */
--# define CONFIG_ENV_SECT_SIZE 0x20000
--# define CONFIG_ENV_ADDR \
-- (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
--# define CONFIG_ENV_SIZE 0x20000
--# endif /* FLASH && !RAMBOOT */
--#else /* !FLASH */
--
--#ifdef SPIFLASH
--# define CONFIG_SYS_NO_FLASH 1
--# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
--# define CONFIG_SPI 1
--# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
--# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
--# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS
--
--# ifdef RAMENV
--# define CONFIG_ENV_IS_NOWHERE 1
--# define CONFIG_ENV_SIZE 0x1000
--# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--
--# else /* SPIFLASH && !RAMENV */
--# define CONFIG_ENV_IS_IN_SPI_FLASH 1
--# define CONFIG_ENV_SPI_MODE SPI_MODE_3
--# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
--# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
--/* 128K(two sectors) for env */
--# define CONFIG_ENV_SECT_SIZE 0x10000
--# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE)
--/* Warning: adjust the offset in respect of other flash content and size */
--# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
--# endif /* SPIFLASH && !RAMBOOT */
--#else /* !SPIFLASH */
--
--/* ENV in RAM */
--# define CONFIG_SYS_NO_FLASH 1
--# define CONFIG_ENV_IS_NOWHERE 1
--# define CONFIG_ENV_SIZE 0x1000
--# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--#endif /* !SPIFLASH */
--#endif /* !FLASH */
--
--#if defined(XILINX_USE_ICACHE)
--# define CONFIG_ICACHE
--#else
--# undef CONFIG_ICACHE
--#endif
--
--#if defined(XILINX_USE_DCACHE)
--# define CONFIG_DCACHE
--#else
--# undef CONFIG_DCACHE
--#endif
-+/* use serial multi for all serial devices */
-+#define CONFIG_SERIAL_MULTI
-+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
--#ifndef XILINX_DCACHE_BYTE_SIZE
--#define XILINX_DCACHE_BYTE_SIZE 32768
--#endif
-+/* Board name */
-
--/*
-- * BOOTP options
-- */
-+/* processor - microblaze_0 */
-+#define XILINX_USE_MSR_INSTR 1
-+#define XILINX_USE_ICACHE 1
-+#define XILINX_USE_DCACHE 1
-+#define XILINX_DCACHE_BYTE_SIZE 16384
-+#define XILINX_PVR 2
-+#define MICROBLAZE_V5
-+#define CONFIG_CMD_IRQ
-+#define CONFIG_DCACHE
-+#define CONFIG_ICACHE
-+
-+/* main_memory - ddr3_sdram */
-+
-+
-+/* uart - rs232_uart */
-+#define CONFIG_CONS_INDEX 1
-+#define CONFIG_SYS_NS16550_COM1 ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-+#define CONFIG_SYS_NS16550_REG_SIZE -4
-+#define CONSOLE_ARG "console=console=ttyS0,115200\0"
-+#define CONFIG_SYS_NS16550_SERIAL
-+#define ESERIAL0 "eserial0=setenv stdout eserial0;setenv stdin eserial0\0"
-+#define SERIAL_MULTI "serial=setenv stdout serial;setenv stdin serial\0"
-+#define CONFIG_SYS_NS16550_CLK 200000000
-+#define CONFIG_BAUDRATE 115200
-+
-+/* ethernet - axi_ethernet */
-+#define CONFIG_PHY_XILINX
-+#define CONFIG_MII
-+#define CONFIG_PHY_GIGE
-+#define CONFIG_PHY_MARVELL
-+#define CONFIG_PHY_NATSEMI
-+#define CONFIG_NET_MULTI
-+#define CONFIG_NETCONSOLE 1
-+#define CONFIG_SERVERIP 172.25.229.115
-+#define CONFIG_IPADDR
-+
-+/* nor_flash - linear_flash */
-+#define CONFIG_SYS_FLASH_BASE 0x60000000
-+#define CONFIG_FLASH_END 0x68000000
-+#define CONFIG_SYS_MAX_FLASH_SECT 2048
-+#define CONFIG_SYS_FLASH_PROTECTION
-+#define CONFIG_SYS_FLASH_EMPTY_INFO
-+#define CONFIG_SYS_FLASH_CFI
-+#define CONFIG_FLASH_CFI_DRIVER
-+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-+#define CONFIG_SYS_MAX_FLASH_BANKS 1
-+
-+/* timer - axi_timer_0 */
-+
-+/* gpio - reset_gpio */
-+#define XILINX_GPIO_BASEADDR 0x40000000
-+#define CONFIG_SYS_GPIO_0_ADDR 0x40000000
-+#define CONFIG_XILINX_GPIO
-+
-+/* intc - microblaze_0_axi_intc */
-+
-+/* Make the BOOTM LEN big enough for the compressed image */
-+#define CONFIG_SYS_BOOTM_LEN 0xF000000
-+
-+/* FPGA */
-+
-+/* Memory testing handling */
-+#define CONFIG_SYS_MEMTEST_START 0x80000000
-+#define CONFIG_SYS_MEMTEST_END (0x80000000 + 0x1000)
-+#define CONFIG_SYS_LOAD_ADDR 0x80000000 /* default load address */
-+
-+/* global pointer options */
-+#define CONFIG_SYS_GBL_DATA_OFFSET (0x40000000 - GENERATED_GBL_DATA_SIZE)
-+
-+/* Size of malloc() pool */
-+#define SIZE 0x100000
-+#define CONFIG_SYS_MALLOC_LEN SIZE
-+#define CONFIG_SYS_MONITOR_LEN SIZE
-+#define CONFIG_SYS_MONITOR_BASE (0x80000000 + CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
-+#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-+
-+/* stack */
-+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_F_LEN)
-+
-+/* No of_control support yet*/
-+
-+/* BOOTP options */
-+#define CONFIG_BOOTP_SERVERIP
- #define CONFIG_BOOTP_BOOTFILESIZE
- #define CONFIG_BOOTP_BOOTPATH
- #define CONFIG_BOOTP_GATEWAY
- #define CONFIG_BOOTP_HOSTNAME
-+#define CONFIG_BOOTP_MAY_FAIL
-
--/*
-- * Command line configuration.
-- */
--#define CONFIG_CMD_IRQ
--#define CONFIG_CMD_MFSL
--
--#if defined(FLASH)
--# define CONFIG_CMD_JFFS2
--# undef CONFIG_CMD_UBIFS
--
--# if !defined(RAMENV)
--# define CONFIG_CMD_SAVES
--# endif
--
--#else
--#if defined(SPIFLASH)
--
--# if !defined(RAMENV)
--# define CONFIG_CMD_SAVES
--# endif
--#else
--# undef CONFIG_CMD_JFFS2
--# undef CONFIG_CMD_UBIFS
--#endif
--#endif
--
--#if defined(CONFIG_CMD_JFFS2)
--# define CONFIG_MTD_PARTITIONS
--#endif
--
--#if defined(CONFIG_CMD_UBIFS)
--# define CONFIG_LZO
--#endif
--
--#if defined(CONFIG_CMD_UBI)
--# define CONFIG_MTD_PARTITIONS
--# define CONFIG_RBTREE
--#endif
--
--#if defined(CONFIG_MTD_PARTITIONS)
--/* MTD partitions */
--#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
--#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
--#define CONFIG_FLASH_CFI_MTD
--#define MTDIDS_DEFAULT "nor0=flash-0"
--
--/* default mtd partition table */
--#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\
-- "256k(env),3m(kernel),1m(romfs),"\
-- "1m(cramfs),-(jffs2)"
--#endif
--
--/* size of console buffer */
--#define CONFIG_SYS_CBSIZE 512
-- /* print buffer size */
--#define CONFIG_SYS_PBSIZE \
-- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
--/* max number of command args */
--#define CONFIG_SYS_MAXARGS 15
--#define CONFIG_SYS_LONGHELP
--/* default load address */
--#define CONFIG_SYS_LOAD_ADDR 0
--
--#define CONFIG_BOOTARGS "root=romfs"
--#define CONFIG_HOSTNAME XILINX_BOARD_NAME
--#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
--
--/* architecture dependent code */
--#define CONFIG_SYS_USR_EXCEP /* user exception */
--
--#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
--
--#ifndef CONFIG_EXTRA_ENV_SETTINGS
--#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
-- "nor0=flash-0\0"\
-- "mtdparts=mtdparts=flash-0:"\
-- "256k(u-boot),256k(env),3m(kernel),"\
-- "1m(romfs),1m(cramfs),-(jffs2)\0"\
-- "nc=setenv stdout nc;"\
-- "setenv stdin nc\0" \
-- "serial=setenv stdout serial;"\
-- "setenv stdin serial\0"
--#endif
--
-+/*Command line configuration.*/
- #define CONFIG_CMDLINE_EDITING
-+#define CONFIG_CMD_SAVES
-
--/* Enable flat device tree support */
--#define CONFIG_LMB 1
--
--#if defined(CONFIG_XILINX_AXIEMAC)
--# define CONFIG_MII 1
--# define CONFIG_PHY_GIGE 1
--# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
--# define CONFIG_PHY_ATHEROS 1
--# define CONFIG_PHY_BROADCOM 1
--# define CONFIG_PHY_DAVICOM 1
--# define CONFIG_PHY_LXT 1
--# define CONFIG_PHY_MARVELL 1
--# define CONFIG_PHY_MICREL 1
--# define CONFIG_PHY_MICREL_KSZ9021
--# define CONFIG_PHY_NATSEMI 1
--# define CONFIG_PHY_REALTEK 1
--# define CONFIG_PHY_VITESSE 1
--#else
--# undef CONFIG_MII
--#endif
--
--/* SPL part */
--#define CONFIG_CMD_SPL
--#define CONFIG_SPL_FRAMEWORK
--#define CONFIG_SPL_BOARD_INIT
-+/* Miscellaneous configurable options */
-+#define CONFIG_SYS_CBSIZE 2048/* Console I/O Buffer Size */
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
--#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
-+/* Boot Argument Buffer Size */
-+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-+#define CONFIG_SYS_LONGHELP
-+/* architecture dependent code */
-+#define CONFIG_SYS_USR_EXCEP /* user exception */
-+#define CONFIG_SYS_HZ 1000
-+
-+/* Use the HUSH parser */
-+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-+
-+/* Don't define BOOTARGS, we get it from the DTB chosen fragment */
-+#undef CONFIG_BOOTARGS
-+
-+#define CONFIG_ENV_OVERWRITE /* Allow to overwrite the u-boot environment variables */
-+
-+#define CONFIG_LMB
-+
-+/* Initial memory map for Linux */
-+#define CONFIG_SYS_BOOTMAPSZ 0x8000000
-+
-+/* Environment settings*/
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_ADDR 0x60b80000
-+#define CONFIG_ENV_SIZE 0x20000
-+#define CONFIG_ENV_SECT_SIZE 0x20000
-+/* PREBOOT */
-+#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot; echo; dhcp"
-+
-+/* Extra U-Boot Env settings */
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ SERIAL_MULTI \
-+ CONSOLE_ARG \
-+ ESERIAL0 \
-+ "nc=setenv stdout nc;setenv stdin nc;\0" \
-+ "ethaddr=00:0a:35:00:22:01\0" \
-+ "autoload=no\0" \
-+ "clobstart=0x81000000\0" \
-+ "netstart=0x81000000\0" \
-+ "dtbnetstart=0x82800000\0" \
-+ "loadaddr=0x81000000\0" \
-+ "bootsize=0x80000\0" \
-+ "bootstart=0x60b00000\0" \
-+ "boot_img=u-boot-s.bin\0" \
-+ "load_boot=tftpboot ${clobstart} ${boot_img}\0" \
-+ "update_boot=setenv img boot; setenv psize ${bootsize}; setenv installcmd \"install_boot\"; run load_boot test_img; setenv img; setenv psize; setenv installcmd\0" \
-+ "install_boot=protect off ${bootstart} +${bootsize} && erase ${bootstart} +${bootsize} && " "cp.b ${clobstart} ${bootstart} ${filesize}\0" \
-+ "bootenvsize=0x20000\0" \
-+ "bootenvstart=0x60b80000\0" \
-+ "eraseenv=protect off ${bootenvstart} +${bootenvsize} && erase ${bootenvstart} +${bootenvsize}\0" \
-+ "kernelsize=0xc00000\0" \
-+ "kernelstart=0x60ba0000\0" \
-+ "kernel_img=image.ub\0" \
-+ "load_kernel=tftpboot ${clobstart} ${kernel_img}\0" \
-+ "update_kernel=setenv img kernel; setenv psize ${kernelsize}; setenv installcmd \"install_kernel\"; run load_kernel test_crc; setenv img; setenv psize; setenv installcmd\0" \
-+ "install_kernel=protect off ${kernelstart} +${kernelsize} && erase ${kernelstart} +${kernelsize} && " "cp.b ${clobstart} ${kernelstart} ${filesize}\0" \
-+ "cp_kernel2ram=cp.b ${kernelstart} ${netstart} ${kernelsize}\0" \
-+ "fpgasize=0xb00000\0" \
-+ "fpgastart=0x60000000\0" \
-+ "fpga_img=system.bit.bin\0" \
-+ "load_fpga=tftpboot ${clobstart} ${fpga_img}\0" \
-+ "update_fpga=setenv img fpga; setenv psize ${fpgasize}; setenv installcmd \"install_fpga\"; run load_fpga test_img; setenv img; setenv psize; setenv installcmd\0" \
-+ "install_fpga=protect off ${fpgastart} +${fpgasize} && erase ${fpgastart} +${fpgasize} && " "cp.b ${clobstart} ${fpgastart} ${filesize}\0" \
-+ "fault=echo ${img} image size is greater than allocated place - partition ${img} is NOT UPDATED\0" \
-+ "test_crc=if imi ${clobstart}; then run test_img; else echo ${img} Bad CRC - ${img} is NOT UPDATED; fi\0" \
-+ "test_img=setenv var \"if test ${filesize} -gt ${psize}\\; then run fault\\; else run ${installcmd}\\; fi\"; run var; setenv var\0" \
-+ "netboot=tftpboot ${netstart} ${kernel_img} && bootm\0" \
-+ "default_bootcmd=bootm ${kernelstart}\0" \
-+""
-+
-+/* BOOTCOMMAND */
-+#define CONFIG_BOOTCOMMAND "run default_bootcmd"
-+
-+#undef CONFIG_SPL_BUILD /* Disable SPL by default*/
-
--#define CONFIG_SPL_RAM_DEVICE
--#ifdef CONFIG_SYS_FLASH_BASE
--# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
- #endif
--
--/* for booting directly linux */
--
--#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
-- 0x40000)
--#define CONFIG_SYS_FDT_SIZE (16<<10)
--#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
-- 0x1000000)
--
--/* SP location before relocation, must use scratch RAM */
--/* BRAM start */
--#define CONFIG_SYS_INIT_RAM_ADDR 0x0
--/* BRAM size - will be generated */
--#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
--
--# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
-- CONFIG_SYS_INIT_RAM_SIZE - \
-- CONFIG_SYS_MALLOC_F_LEN)
--
--/* Just for sure that there is a space for stack */
--#define CONFIG_SPL_STACK_SIZE 0x100
--
--#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
--
--#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
-- CONFIG_SYS_INIT_RAM_ADDR - \
-- CONFIG_SYS_MALLOC_F_LEN - \
-- CONFIG_SPL_STACK_SIZE)
--
--#endif /* __CONFIG_H */
---
-2.7.4
-
diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2017.3.bb b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2017.3.bb
deleted file mode 100644
index 016c0ce..0000000
--- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2017.3.bb
+++ /dev/null
@@ -1,26 +0,0 @@
-UBOOT_VERSION = "v2017.01"
-XILINX_RELEASE_VERSION = "v2017.3"
-SRCREV ?= "da811c4511ef9caeb95f9a22fe49d38bd8e56ded"
-
-include u-boot-xlnx.inc
-include u-boot-spl-zynq-init.inc
-
-SRC_URI_append = " \
- file://arm64-zynqmp-Setup-partid-for-QEMU-to-match-silicon.patch \
- "
-
-SRC_URI_append_kc705-microblazeel = " file://microblaze-kc705-Convert-microblaze-generic-to-k.patch"
-
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://README;beginline=1;endline=6;md5=157ab8408beab40cd8ce1dc69f702a6c"
-
-# u-boot-xlnx has support for these
-HAS_PLATFORM_INIT ?= " \
- zynq_microzed_config \
- zynq_zed_config \
- zynq_zc702_config \
- zynq_zc706_config \
- zynq_zybo_config \
- xilinx_zynqmp_zcu102_rev1_0_config \
- "
-
diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2017.3.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2017.3.bb
deleted file mode 100644
index ec6093b..0000000
--- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2017.3.bb
+++ /dev/null
@@ -1,4 +0,0 @@
-require qemu-devicetrees.inc
-
-XILINX_RELEASE_VERSION = "v2017.3"
-SRCREV ?= "4b951c594078562e9dd828430075968dd91ac425"
diff --git a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2017.3.bb b/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2017.3.bb
deleted file mode 100644
index f8a91d7..0000000
--- a/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2017.3.bb
+++ /dev/null
@@ -1,5 +0,0 @@
-require qemu-xilinx.inc
-
-XILINX_RELEASE_VERSION = "v2017.3"
-XILINX_QEMU_VERSION = "v2.8.1"
-SRCREV ?= "8f8c89b18f6e4523099e41d81769fc534064b8de"
diff --git a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2017.3.bb b/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2017.3.bb
deleted file mode 100644
index 7115947..0000000
--- a/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2017.3.bb
+++ /dev/null
@@ -1,6 +0,0 @@
-LINUX_VERSION = "4.9"
-XILINX_RELEASE_VERSION = "v2017.3"
-SRCREV ?= "f1b1e077d641fc83b54c1b8f168cbb58044fbd4e"
-
-include linux-xlnx.inc
-
diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch
deleted file mode 100644
index b8ba70e..0000000
--- a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch
+++ /dev/null
@@ -1,302 +0,0 @@
-From c1bf9e8c50baa237b514715dcb9c8fd367694c93 Mon Sep 17 00:00:00 2001
-From: Jason Wu <jason.wu.misc at gmail.com>
-Date: Sun, 10 Apr 2016 13:14:13 +1000
-Subject: [PATCH 1/3] drm: xilinx: Add encoder for Digilent boards
-
-Add the dglnt_encoder driver that enables DRM support for the VGA and
-HDMI output ports found on many Digilent boards.
-
-Upstream-Status: Pending
-
-Signed-off-by: Sam Bobrowicz <sbobrowicz at digilentinc.com>
-Signed-off-by: Jason Wu <jason.wu.misc at gmail.com>
----
- .../bindings/drm/xilinx/dglnt_encoder.txt | 23 +++
- drivers/gpu/drm/xilinx/Kconfig | 6 +
- drivers/gpu/drm/xilinx/Makefile | 1 +
- drivers/gpu/drm/xilinx/dglnt_encoder.c | 217 +++++++++++++++++++++
- 4 files changed, 247 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt
- create mode 100644 drivers/gpu/drm/xilinx/dglnt_encoder.c
-
-diff --git a/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt b/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt
-new file mode 100644
-index 0000000000..242b24e482
---- /dev/null
-+++ b/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt
-@@ -0,0 +1,23 @@
-+Device-Tree bindings for Digilent DRM Encoder Slave
-+
-+This driver provides support for VGA and HDMI outputs on Digilent FPGA boards.
-+The VGA or HDMI port must be connected to a Xilinx display pipeline via an
-+axi2vid IP core.
-+
-+Required properties:
-+ - compatible: Should be "digilent,drm-encoder".
-+
-+Optional properties:
-+ - dglnt,edid-i2c: The I2C device connected to the DDC bus on the video
-+ connector. This is used to obtain the supported resolutions
-+ of an attached monitor. If not defined, then a default
-+ set of resolutions is used and the display will initialize
-+ to 720p. Note most VGA connectors on Digilent boards do
-+ not have the DDC bus routed out.
-+
-+Example:
-+
-+ encoder_0: digilent_encoder {
-+ compatible = "digilent,drm-encoder";
-+ dglnt,edid-i2c = <&i2c1>;
-+ };
-diff --git a/drivers/gpu/drm/xilinx/Kconfig b/drivers/gpu/drm/xilinx/Kconfig
-index 12b548c2a9..c3e2562e53 100644
---- a/drivers/gpu/drm/xilinx/Kconfig
-+++ b/drivers/gpu/drm/xilinx/Kconfig
-@@ -57,3 +57,9 @@ config DRM_XILINX_SDI
- depends on DRM_XILINX
- help
- DRM driver for Xilinx Display Port Subsystem.
-+
-+config DRM_DIGILENT_ENCODER
-+ tristate "Digilent VGA/HDMI DRM Encoder Driver"
-+ depends on DRM_XILINX
-+ help
-+ DRM slave encoder for Video-out on Digilent boards.
-diff --git a/drivers/gpu/drm/xilinx/Makefile b/drivers/gpu/drm/xilinx/Makefile
-index 19bc1541ca..c2717e40ea 100644
---- a/drivers/gpu/drm/xilinx/Makefile
-+++ b/drivers/gpu/drm/xilinx/Makefile
-@@ -7,6 +7,7 @@ xilinx_drm-y := xilinx_drm_crtc.o xilinx_drm_connector.o xilinx_drm_drv.o \
- xilinx_drm_plane.o
- xilinx_drm-y += xilinx_cresample.o xilinx_osd.o xilinx_rgb2yuv.o xilinx_vtc.o
-
-+obj-$(CONFIG_DRM_DIGILENT_ENCODER) += dglnt_encoder.o
- obj-$(CONFIG_DRM_XILINX) += xilinx_drm.o
- obj-$(CONFIG_DRM_XILINX_DP) += xilinx_drm_dp.o
- obj-$(CONFIG_DRM_XILINX_DP_SUB) += xilinx_drm_dp_sub.o
-diff --git a/drivers/gpu/drm/xilinx/dglnt_encoder.c b/drivers/gpu/drm/xilinx/dglnt_encoder.c
-new file mode 100644
-index 0000000000..26a23986f9
---- /dev/null
-+++ b/drivers/gpu/drm/xilinx/dglnt_encoder.c
-@@ -0,0 +1,217 @@
-+/*
-+ * dglnt_encoder.c - DRM slave encoder for Video-out on Digilent boards
-+ *
-+ * Copyright (C) 2015 Digilent
-+ * Author: Sam Bobrowicz <sbobrowicz at digilentinc.com>
-+ *
-+ * Based on udl_encoder.c and udl_connector.c, Copyright (C) 2012 Red Hat.
-+ * Also based on xilinx_drm_dp.c, Copyright (C) 2014 Xilinx, Inc.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <drm/drmP.h>
-+#include <drm/drm_edid.h>
-+#include <drm/drm_encoder_slave.h>
-+
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+
-+#define DGLNT_ENC_MAX_FREQ 150000
-+#define DGLNT_ENC_MAX_H 1920
-+#define DGLNT_ENC_MAX_V 1080
-+#define DGLNT_ENC_PREF_H 1280
-+#define DGLNT_ENC_PREF_V 720
-+
-+struct dglnt_encoder {
-+ struct drm_encoder *encoder;
-+ struct i2c_adapter *i2c_bus;
-+ bool i2c_present;
-+};
-+
-+static inline struct dglnt_encoder *to_dglnt_encoder(
-+ struct drm_encoder *encoder)
-+{
-+ return to_encoder_slave(encoder)->slave_priv;
-+}
-+
-+static bool dglnt_mode_fixup(struct drm_encoder *encoder,
-+ const struct drm_display_mode *mode,
-+ struct drm_display_mode *adjusted_mode)
-+{
-+ return true;
-+}
-+
-+static void dglnt_encoder_mode_set(struct drm_encoder *encoder,
-+ struct drm_display_mode *mode,
-+ struct drm_display_mode *adjusted_mode)
-+{
-+}
-+
-+static void
-+dglnt_encoder_dpms(struct drm_encoder *encoder, int mode)
-+{
-+}
-+
-+static void dglnt_encoder_save(struct drm_encoder *encoder)
-+{
-+}
-+
-+static void dglnt_encoder_restore(struct drm_encoder *encoder)
-+{
-+}
-+
-+static int dglnt_encoder_mode_valid(struct drm_encoder *encoder,
-+ struct drm_display_mode *mode)
-+{
-+ if (mode &&
-+ !(mode->flags & ((DRM_MODE_FLAG_INTERLACE |
-+ DRM_MODE_FLAG_DBLCLK) | DRM_MODE_FLAG_3D_MASK)) &&
-+ (mode->clock <= DGLNT_ENC_MAX_FREQ) &&
-+ (mode->hdisplay <= DGLNT_ENC_MAX_H) &&
-+ (mode->vdisplay <= DGLNT_ENC_MAX_V))
-+ return MODE_OK;
-+ return MODE_BAD;
-+}
-+
-+static int dglnt_encoder_get_modes(struct drm_encoder *encoder,
-+ struct drm_connector *connector)
-+{
-+ struct dglnt_encoder *dglnt = to_dglnt_encoder(encoder);
-+ struct edid *edid;
-+ int num_modes = 0;
-+
-+ if (dglnt->i2c_present) {
-+ edid = drm_get_edid(connector, dglnt->i2c_bus);
-+ drm_mode_connector_update_edid_property(connector, edid);
-+ if (edid) {
-+ num_modes = drm_add_edid_modes(connector, edid);
-+ kfree(edid);
-+ }
-+ } else {
-+ num_modes = drm_add_modes_noedid(connector, DGLNT_ENC_MAX_H,
-+ DGLNT_ENC_MAX_V);
-+ drm_set_preferred_mode(connector, DGLNT_ENC_PREF_H,
-+ DGLNT_ENC_PREF_V);
-+ }
-+ return num_modes;
-+}
-+
-+static enum drm_connector_status dglnt_encoder_detect(
-+ struct drm_encoder *encoder,
-+ struct drm_connector *connector)
-+{
-+ struct dglnt_encoder *dglnt = to_dglnt_encoder(encoder);
-+
-+ if (dglnt->i2c_present) {
-+ if (drm_probe_ddc(dglnt->i2c_bus))
-+ return connector_status_connected;
-+ return connector_status_disconnected;
-+ } else
-+ return connector_status_unknown;
-+}
-+
-+static struct drm_encoder_slave_funcs dglnt_encoder_slave_funcs = {
-+ .dpms = dglnt_encoder_dpms,
-+ .save = dglnt_encoder_save,
-+ .restore = dglnt_encoder_restore,
-+ .mode_fixup = dglnt_mode_fixup,
-+ .mode_valid = dglnt_encoder_mode_valid,
-+ .mode_set = dglnt_encoder_mode_set,
-+ .detect = dglnt_encoder_detect,
-+ .get_modes = dglnt_encoder_get_modes,
-+};
-+
-+static int dglnt_encoder_encoder_init(struct platform_device *pdev,
-+ struct drm_device *dev,
-+ struct drm_encoder_slave *encoder)
-+{
-+ struct dglnt_encoder *dglnt = platform_get_drvdata(pdev);
-+ struct device_node *sub_node;
-+
-+ encoder->slave_priv = dglnt;
-+ encoder->slave_funcs = &dglnt_encoder_slave_funcs;
-+
-+ dglnt->encoder = &encoder->base;
-+
-+ /* get i2c adapter for edid */
-+ dglnt->i2c_present = false;
-+ sub_node = of_parse_phandle(pdev->dev.of_node, "dglnt,edid-i2c", 0);
-+ if (sub_node) {
-+ dglnt->i2c_bus = of_find_i2c_adapter_by_node(sub_node);
-+ if (!dglnt->i2c_bus)
-+ DRM_INFO("failed to get the edid i2c adapter, using default modes\n");
-+ else
-+ dglnt->i2c_present = true;
-+ of_node_put(sub_node);
-+ }
-+
-+ return 0;
-+}
-+
-+static int dglnt_encoder_probe(struct platform_device *pdev)
-+{
-+ struct dglnt_encoder *dglnt;
-+
-+ dglnt = devm_kzalloc(&pdev->dev, sizeof(*dglnt), GFP_KERNEL);
-+ if (!dglnt)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, dglnt);
-+
-+ return 0;
-+}
-+
-+static int dglnt_encoder_remove(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id dglnt_encoder_of_match[] = {
-+ { .compatible = "digilent,drm-encoder", },
-+ { /* end of table */ },
-+};
-+MODULE_DEVICE_TABLE(of, dglnt_encoder_of_match);
-+
-+static struct drm_platform_encoder_driver dglnt_encoder_driver = {
-+ .platform_driver = {
-+ .probe = dglnt_encoder_probe,
-+ .remove = dglnt_encoder_remove,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "dglnt-drm-enc",
-+ .of_match_table = dglnt_encoder_of_match,
-+ },
-+ },
-+
-+ .encoder_init = dglnt_encoder_encoder_init,
-+};
-+
-+static int __init dglnt_encoder_init(void)
-+{
-+ return platform_driver_register(&dglnt_encoder_driver.platform_driver);
-+}
-+
-+static void __exit dglnt_encoder_exit(void)
-+{
-+ platform_driver_unregister(&dglnt_encoder_driver.platform_driver);
-+}
-+
-+module_init(dglnt_encoder_init);
-+module_exit(dglnt_encoder_exit);
-+
-+MODULE_AUTHOR("Digilent, Inc.");
-+MODULE_DESCRIPTION("DRM slave encoder for Video-out on Digilent boards");
-+MODULE_LICENSE("GPL v2");
---
-2.14.2
-
diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch
deleted file mode 100644
index 9b6229d..0000000
--- a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch
+++ /dev/null
@@ -1,607 +0,0 @@
-From 217e3b6f4393926b8dcad841381527ef3fc808c2 Mon Sep 17 00:00:00 2001
-From: Jason Wu <jason.wu.misc at gmail.com>
-Date: Sun, 10 Apr 2016 13:16:06 +1000
-Subject: [PATCH 2/3] clk: Add driver for axi_dynclk IP Core
-
-Add support for the axi_dynclk IP Core available from Digilent. This IP
-core dynamically configures the clock resources inside a Xilinx FPGA to
-generate a clock with a software programmable frequency.
-
-Upstream-Status: Pending
-
-Signed-off-by: Sam Bobrowicz <sbobrowicz at digilentinc.com>
-Signed-off-by: Jason Wu <jason.wu.misc at gmail.com>
----
- drivers/clk/Kconfig | 8 +
- drivers/clk/Makefile | 1 +
- drivers/clk/clk-dglnt-dynclk.c | 547 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 556 insertions(+)
- create mode 100644 drivers/clk/clk-dglnt-dynclk.c
-
-diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
-index dccb111100..7fe65a702b 100644
---- a/drivers/clk/Kconfig
-+++ b/drivers/clk/Kconfig
-@@ -148,6 +148,14 @@ config CLK_QORIQ
- This adds the clock driver support for Freescale QorIQ platforms
- using common clock framework.
-
-+config COMMON_CLK_DGLNT_DYNCLK
-+ tristate "Digilent axi_dynclk Driver"
-+ depends on ARCH_ZYNQ || MICROBLAZE
-+ help
-+ ---help---
-+ Support for the Digilent AXI Dynamic Clock core for Xilinx
-+ FPGAs.
-+
- config COMMON_CLK_XGENE
- bool "Clock driver for APM XGene SoC"
- default y
-diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
-index 0760449dde..45ce97d053 100644
---- a/drivers/clk/Makefile
-+++ b/drivers/clk/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
- obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
- obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
- obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
-+obj-$(CONFIG_COMMON_CLK_DGLNT_DYNCLK) += clk-dglnt-dynclk.o
- obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
- obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
- obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
-diff --git a/drivers/clk/clk-dglnt-dynclk.c b/drivers/clk/clk-dglnt-dynclk.c
-new file mode 100644
-index 0000000000..496ad5fc90
---- /dev/null
-+++ b/drivers/clk/clk-dglnt-dynclk.c
-@@ -0,0 +1,547 @@
-+/*
-+ * clk-dglnt-dynclk.c - Digilent AXI Dynamic Clock (axi_dynclk) Driver
-+ *
-+ * Copyright (C) 2015 Digilent
-+ * Author: Sam Bobrowicz <sbobrowicz at digilentinc.com>
-+ *
-+ * Reused code from clk-axi-clkgen.c, Copyright (C) 2012-2013 Analog Devices Inc.
-+ *
-+ * This software is licensed under the terms of the GNU General Public
-+ * License version 2, as published by the Free Software Foundation, and
-+ * may be copied, distributed, and modified under those terms.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/clk-provider.h>
-+#include <linux/clk.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/kernel.h>
-+
-+#define CLK_BIT_WEDGE 13
-+#define CLK_BIT_NOCOUNT 12
-+
-+/* This value is used to signal an error */
-+#define ERR_CLKCOUNTCALC 0xFFFFFFFF
-+#define ERR_CLKDIVIDER (1 << CLK_BIT_WEDGE | 1 << CLK_BIT_NOCOUNT)
-+
-+#define DYNCLK_DIV_1_REGMASK 0x1041
-+/* 25 MHz (125 KHz / 5) */
-+#define DYNCLK_DEFAULT_FREQ 125000
-+
-+#define MMCM_FREQ_VCOMIN 600000
-+#define MMCM_FREQ_VCOMAX 1200000
-+#define MMCM_FREQ_PFDMIN 10000
-+#define MMCM_FREQ_PFDMAX 450000
-+#define MMCM_FREQ_OUTMIN 4000
-+#define MMCM_FREQ_OUTMAX 800000
-+#define MMCM_DIV_MAX 106
-+#define MMCM_FB_MIN 2
-+#define MMCM_FB_MAX 64
-+#define MMCM_CLKDIV_MAX 128
-+#define MMCM_CLKDIV_MIN 1
-+
-+#define OFST_DISPLAY_CTRL 0x0
-+#define OFST_DISPLAY_STATUS 0x4
-+#define OFST_DISPLAY_CLK_L 0x8
-+#define OFST_DISPLAY_FB_L 0x0C
-+#define OFST_DISPLAY_FB_H_CLK_H 0x10
-+#define OFST_DISPLAY_DIV 0x14
-+#define OFST_DISPLAY_LOCK_L 0x18
-+#define OFST_DISPLAY_FLTR_LOCK_H 0x1C
-+
-+static const u64 lock_lookup[64] = {
-+ 0b0011000110111110100011111010010000000001,
-+ 0b0011000110111110100011111010010000000001,
-+ 0b0100001000111110100011111010010000000001,
-+ 0b0101101011111110100011111010010000000001,
-+ 0b0111001110111110100011111010010000000001,
-+ 0b1000110001111110100011111010010000000001,
-+ 0b1001110011111110100011111010010000000001,
-+ 0b1011010110111110100011111010010000000001,
-+ 0b1100111001111110100011111010010000000001,
-+ 0b1110011100111110100011111010010000000001,
-+ 0b1111111111111000010011111010010000000001,
-+ 0b1111111111110011100111111010010000000001,
-+ 0b1111111111101110111011111010010000000001,
-+ 0b1111111111101011110011111010010000000001,
-+ 0b1111111111101000101011111010010000000001,
-+ 0b1111111111100111000111111010010000000001,
-+ 0b1111111111100011111111111010010000000001,
-+ 0b1111111111100010011011111010010000000001,
-+ 0b1111111111100000110111111010010000000001,
-+ 0b1111111111011111010011111010010000000001,
-+ 0b1111111111011101101111111010010000000001,
-+ 0b1111111111011100001011111010010000000001,
-+ 0b1111111111011010100111111010010000000001,
-+ 0b1111111111011001000011111010010000000001,
-+ 0b1111111111011001000011111010010000000001,
-+ 0b1111111111010111011111111010010000000001,
-+ 0b1111111111010101111011111010010000000001,
-+ 0b1111111111010101111011111010010000000001,
-+ 0b1111111111010100010111111010010000000001,
-+ 0b1111111111010100010111111010010000000001,
-+ 0b1111111111010010110011111010010000000001,
-+ 0b1111111111010010110011111010010000000001,
-+ 0b1111111111010010110011111010010000000001,
-+ 0b1111111111010001001111111010010000000001,
-+ 0b1111111111010001001111111010010000000001,
-+ 0b1111111111010001001111111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001,
-+ 0b1111111111001111101011111010010000000001
-+};
-+
-+static const u32 filter_lookup_low[64] = {
-+ 0b0001011111,
-+ 0b0001010111,
-+ 0b0001111011,
-+ 0b0001011011,
-+ 0b0001101011,
-+ 0b0001110011,
-+ 0b0001110011,
-+ 0b0001110011,
-+ 0b0001110011,
-+ 0b0001001011,
-+ 0b0001001011,
-+ 0b0001001011,
-+ 0b0010110011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001010011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0001100011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010010011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011,
-+ 0b0010100011
-+};
-+
-+struct dglnt_dynclk_reg;
-+struct dglnt_dynclk_mode;
-+struct dglnt_dynclk;
-+
-+struct dglnt_dynclk_reg {
-+ u32 clk0L;
-+ u32 clkFBL;
-+ u32 clkFBH_clk0H;
-+ u32 divclk;
-+ u32 lockL;
-+ u32 fltr_lockH;
-+};
-+
-+struct dglnt_dynclk_mode {
-+ u32 freq;
-+ u32 fbmult;
-+ u32 clkdiv;
-+ u32 maindiv;
-+};
-+
-+struct dglnt_dynclk {
-+ void __iomem *base;
-+ struct clk_hw clk_hw;
-+ unsigned long freq;
-+};
-+
-+u32 dglnt_dynclk_divider(u32 divide)
-+{
-+ u32 output = 0;
-+ u32 highTime = 0;
-+ u32 lowTime = 0;
-+
-+ if ((divide < 1) || (divide > 128))
-+ return ERR_CLKDIVIDER;
-+
-+ if (divide == 1)
-+ return DYNCLK_DIV_1_REGMASK;
-+
-+ highTime = divide / 2;
-+ /* if divide is odd */
-+ if (divide & 0x1) {
-+ lowTime = highTime + 1;
-+ output = 1 << CLK_BIT_WEDGE;
-+ } else {
-+ lowTime = highTime;
-+ }
-+
-+ output |= 0x03F & lowTime;
-+ output |= 0xFC0 & (highTime << 6);
-+ return output;
-+}
-+
-+u32 dglnt_dynclk_count_calc(u32 divide)
-+{
-+ u32 output = 0;
-+ u32 divCalc = 0;
-+
-+ divCalc = dglnt_dynclk_divider(divide);
-+ if (divCalc == ERR_CLKDIVIDER)
-+ output = ERR_CLKCOUNTCALC;
-+ else
-+ output = (0xFFF & divCalc) | ((divCalc << 10) & 0x00C00000);
-+ return output;
-+}
-+
-+
-+int dglnt_dynclk_find_reg(struct dglnt_dynclk_reg *regValues,
-+ struct dglnt_dynclk_mode *clkParams)
-+{
-+ if ((clkParams->fbmult < 2) || clkParams->fbmult > 64)
-+ return -EINVAL;
-+
-+ regValues->clk0L = dglnt_dynclk_count_calc(clkParams->clkdiv);
-+ if (regValues->clk0L == ERR_CLKCOUNTCALC)
-+ return -EINVAL;
-+
-+ regValues->clkFBL = dglnt_dynclk_count_calc(clkParams->fbmult);
-+ if (regValues->clkFBL == ERR_CLKCOUNTCALC)
-+ return -EINVAL;
-+
-+ regValues->clkFBH_clk0H = 0;
-+
-+ regValues->divclk = dglnt_dynclk_divider(clkParams->maindiv);
-+ if (regValues->divclk == ERR_CLKDIVIDER)
-+ return -EINVAL;
-+
-+ regValues->lockL = (u32)(lock_lookup[clkParams->fbmult - 1] &
-+ 0xFFFFFFFF);
-+
-+ regValues->fltr_lockH = (u32)((lock_lookup[clkParams->fbmult - 1] >>
-+ 32) & 0x000000FF);
-+ regValues->fltr_lockH |= ((filter_lookup_low[clkParams->fbmult - 1] <<
-+ 16) & 0x03FF0000);
-+
-+ return 0;
-+}
-+
-+void dglnt_dynclk_write_reg(struct dglnt_dynclk_reg *regValues,
-+ void __iomem *baseaddr)
-+{
-+ writel(regValues->clk0L, baseaddr + OFST_DISPLAY_CLK_L);
-+ writel(regValues->clkFBL, baseaddr + OFST_DISPLAY_FB_L);
-+ writel(regValues->clkFBH_clk0H, baseaddr + OFST_DISPLAY_FB_H_CLK_H);
-+ writel(regValues->divclk, baseaddr + OFST_DISPLAY_DIV);
-+ writel(regValues->lockL, baseaddr + OFST_DISPLAY_LOCK_L);
-+ writel(regValues->fltr_lockH, baseaddr + OFST_DISPLAY_FLTR_LOCK_H);
-+}
-+
-+u32 dglnt_dynclk_find_mode(u32 freq, u32 parentFreq,
-+ struct dglnt_dynclk_mode *bestPick)
-+{
-+ u32 bestError = MMCM_FREQ_OUTMAX;
-+ u32 curError;
-+ u32 curClkMult;
-+ u32 curFreq;
-+ u32 divVal;
-+ u32 curFb, curClkDiv;
-+ u32 minFb = 0;
-+ u32 maxFb = 0;
-+ u32 curDiv = 1;
-+ u32 maxDiv;
-+ bool freq_found = false;
-+
-+ bestPick->freq = 0;
-+ if (parentFreq == 0)
-+ return 0;
-+
-+ /* minimum frequency is actually dictated by VCOmin */
-+ if (freq < MMCM_FREQ_OUTMIN)
-+ freq = MMCM_FREQ_OUTMIN;
-+ if (freq > MMCM_FREQ_OUTMAX)
-+ freq = MMCM_FREQ_OUTMAX;
-+
-+ if (parentFreq > MMCM_FREQ_PFDMAX)
-+ curDiv = 2;
-+ maxDiv = parentFreq / MMCM_FREQ_PFDMIN;
-+ if (maxDiv > MMCM_DIV_MAX)
-+ maxDiv = MMCM_DIV_MAX;
-+
-+ while (curDiv <= maxDiv && !freq_found) {
-+ minFb = curDiv * DIV_ROUND_UP(MMCM_FREQ_VCOMIN, parentFreq);
-+ maxFb = curDiv * (MMCM_FREQ_VCOMAX / parentFreq);
-+ if (maxFb > MMCM_FB_MAX)
-+ maxFb = MMCM_FB_MAX;
-+ if (minFb < MMCM_FB_MIN)
-+ minFb = MMCM_FB_MIN;
-+
-+ divVal = curDiv * freq;
-+ /*
-+ * This multiplier is used to find the best clkDiv value for
-+ * each FB value
-+ */
-+ curClkMult = ((parentFreq * 1000) + (divVal / 2)) / divVal;
-+
-+ curFb = minFb;
-+ while (curFb <= maxFb && !freq_found) {
-+ curClkDiv = ((curClkMult * curFb) + 500) / 1000;
-+ if (curClkDiv > MMCM_CLKDIV_MAX)
-+ curClkDiv = MMCM_CLKDIV_MAX;
-+ if (curClkDiv < MMCM_CLKDIV_MIN)
-+ curClkDiv = MMCM_CLKDIV_MIN;
-+ curFreq = (((parentFreq * curFb) / curDiv) / curClkDiv);
-+ if (curFreq >= freq)
-+ curError = curFreq - freq;
-+ else
-+ curError = freq - curFreq;
-+ if (curError < bestError) {
-+ bestError = curError;
-+ bestPick->clkdiv = curClkDiv;
-+ bestPick->fbmult = curFb;
-+ bestPick->maindiv = curDiv;
-+ bestPick->freq = curFreq;
-+ }
-+ if (!curError)
-+ freq_found = true;
-+ curFb++;
-+ }
-+ curDiv++;
-+ }
-+ return bestPick->freq;
-+}
-+
-+static struct dglnt_dynclk *clk_hw_to_dglnt_dynclk(struct clk_hw *clk_hw)
-+{
-+ return container_of(clk_hw, struct dglnt_dynclk, clk_hw);
-+}
-+
-+
-+static int dglnt_dynclk_enable(struct clk_hw *clk_hw)
-+{
-+ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
-+ unsigned int clock_state;
-+
-+ if (dglnt_dynclk->freq) {
-+ writel(1, dglnt_dynclk->base + OFST_DISPLAY_CTRL);
-+ do {
-+ clock_state = readl(dglnt_dynclk->base +
-+ OFST_DISPLAY_STATUS);
-+ } while (!clock_state);
-+ }
-+ return 0;
-+}
-+
-+static void dglnt_dynclk_disable(struct clk_hw *clk_hw)
-+{
-+ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
-+
-+ writel(0, dglnt_dynclk->base + OFST_DISPLAY_CTRL);
-+}
-+
-+static int dglnt_dynclk_set_rate(struct clk_hw *clk_hw,
-+ unsigned long rate, unsigned long parent_rate)
-+{
-+ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
-+ struct dglnt_dynclk_reg clkReg;
-+ struct dglnt_dynclk_mode clkMode;
-+
-+ if (parent_rate == 0 || rate == 0)
-+ return -EINVAL;
-+ if (rate == dglnt_dynclk->freq)
-+ return 0;
-+
-+ /*
-+ * Convert from Hz to KHz, then multiply by five to account for
-+ * BUFR division
-+ */
-+ rate = (rate + 100) / 200;
-+ /* convert from Hz to KHz */
-+ parent_rate = (parent_rate + 500) / 1000;
-+ if (!dglnt_dynclk_find_mode(rate, parent_rate, &clkMode))
-+ return -EINVAL;
-+
-+ /*
-+ * Write to the PLL dynamic configuration registers to configure it
-+ * with the calculated parameters.
-+ */
-+ dglnt_dynclk_find_reg(&clkReg, &clkMode);
-+ dglnt_dynclk_write_reg(&clkReg, dglnt_dynclk->base);
-+ dglnt_dynclk->freq = clkMode.freq * 200;
-+ dglnt_dynclk_disable(clk_hw);
-+ dglnt_dynclk_enable(clk_hw);
-+
-+ return 0;
-+}
-+
-+static long dglnt_dynclk_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ struct dglnt_dynclk_mode clkMode;
-+
-+ dglnt_dynclk_find_mode(((rate + 100) / 200),
-+ ((*parent_rate) + 500) / 1000, &clkMode);
-+
-+ return (clkMode.freq * 200);
-+}
-+
-+static unsigned long dglnt_dynclk_recalc_rate(struct clk_hw *clk_hw,
-+ unsigned long parent_rate)
-+{
-+ struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
-+
-+ return dglnt_dynclk->freq;
-+}
-+
-+
-+static const struct clk_ops dglnt_dynclk_ops = {
-+ .recalc_rate = dglnt_dynclk_recalc_rate,
-+ .round_rate = dglnt_dynclk_round_rate,
-+ .set_rate = dglnt_dynclk_set_rate,
-+ .enable = dglnt_dynclk_enable,
-+ .disable = dglnt_dynclk_disable,
-+};
-+
-+static const struct of_device_id dglnt_dynclk_ids[] = {
-+ { .compatible = "digilent,axi-dynclk", },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, dglnt_dynclk_ids);
-+
-+static int dglnt_dynclk_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *id;
-+ struct dglnt_dynclk *dglnt_dynclk;
-+ struct clk_init_data init;
-+ const char *parent_name;
-+ const char *clk_name;
-+ struct resource *mem;
-+ struct clk *clk;
-+
-+ if (!pdev->dev.of_node)
-+ return -ENODEV;
-+
-+ id = of_match_node(dglnt_dynclk_ids, pdev->dev.of_node);
-+ if (!id)
-+ return -ENODEV;
-+
-+ dglnt_dynclk = devm_kzalloc(&pdev->dev, sizeof(*dglnt_dynclk),
-+ GFP_KERNEL);
-+ if (!dglnt_dynclk)
-+ return -ENOMEM;
-+
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ dglnt_dynclk->base = devm_ioremap_resource(&pdev->dev, mem);
-+ if (IS_ERR(dglnt_dynclk->base))
-+ return PTR_ERR(dglnt_dynclk->base);
-+
-+ parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
-+ if (!parent_name)
-+ return -EINVAL;
-+
-+ clk_name = pdev->dev.of_node->name;
-+ of_property_read_string(pdev->dev.of_node, "clock-output-names",
-+ &clk_name);
-+
-+ init.name = clk_name;
-+ init.ops = &dglnt_dynclk_ops;
-+ init.flags = 0;
-+ init.parent_names = &parent_name;
-+ init.num_parents = 1;
-+
-+ dglnt_dynclk->freq = 0;
-+ dglnt_dynclk_disable(&dglnt_dynclk->clk_hw);
-+
-+ dglnt_dynclk->clk_hw.init = &init;
-+ clk = devm_clk_register(&pdev->dev, &dglnt_dynclk->clk_hw);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+
-+ return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
-+ clk);
-+}
-+
-+static int dglnt_dynclk_remove(struct platform_device *pdev)
-+{
-+ of_clk_del_provider(pdev->dev.of_node);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver dglnt_dynclk_driver = {
-+ .driver = {
-+ .name = "dglnt-dynclk",
-+ .owner = THIS_MODULE,
-+ .of_match_table = dglnt_dynclk_ids,
-+ },
-+ .probe = dglnt_dynclk_probe,
-+ .remove = dglnt_dynclk_remove,
-+};
-+module_platform_driver(dglnt_dynclk_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Sam Bobrowicz <sbobrowicz at digilentinc.com>");
-+MODULE_DESCRIPTION("CCF Driver for Digilent axi_dynclk IP Core");
---
-2.14.2
-
diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch
deleted file mode 100644
index a98d84c..0000000
--- a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2017.3/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 1a18e2b514ae9e75145597ac509a87f656c976ba Mon Sep 17 00:00:00 2001
-From: Nathan Rossi <nathan at nathanrossi.com>
-Date: Mon, 2 May 2016 23:46:42 +1000
-Subject: [PATCH 3/3] drm: xilinx: Fix DPMS transition to on
-
-Fix the issues where the VTC is reset (losing its timing config).
-
-Also fix the issue where the plane destroys its DMA descriptors and
-marks the DMA channels as inactive but never recreates the descriptors
-and never updates the active state when turning DPMS back on.
-
-Signed-off-by: Nathan Rossi <nathan at nathanrossi.com>
-Upstream-Status: Pending [This is a workaround]
----
- drivers/gpu/drm/xilinx/xilinx_drm_crtc.c | 1 -
- drivers/gpu/drm/xilinx/xilinx_drm_plane.c | 3 ++-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c b/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c
-index 631d35b921..93dbd4b58a 100644
---- a/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c
-+++ b/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c
-@@ -88,7 +88,6 @@ static void xilinx_drm_crtc_dpms(struct drm_crtc *base_crtc, int dpms)
- default:
- if (crtc->vtc) {
- xilinx_vtc_disable(crtc->vtc);
-- xilinx_vtc_reset(crtc->vtc);
- }
- if (crtc->cresample) {
- xilinx_cresample_disable(crtc->cresample);
-diff --git a/drivers/gpu/drm/xilinx/xilinx_drm_plane.c b/drivers/gpu/drm/xilinx/xilinx_drm_plane.c
-index 6a248b72d4..d2518a4bdf 100644
---- a/drivers/gpu/drm/xilinx/xilinx_drm_plane.c
-+++ b/drivers/gpu/drm/xilinx/xilinx_drm_plane.c
-@@ -140,7 +140,7 @@ void xilinx_drm_plane_commit(struct drm_plane *base_plane)
- for (i = 0; i < MAX_NUM_SUB_PLANES; i++) {
- struct xilinx_drm_plane_dma *dma = &plane->dma[i];
-
-- if (dma->chan && dma->is_active) {
-+ if (dma->chan) {
- flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
- desc = dmaengine_prep_interleaved_dma(dma->chan,
- &dma->xt,
-@@ -153,6 +153,7 @@ void xilinx_drm_plane_commit(struct drm_plane *base_plane)
- dmaengine_submit(desc);
-
- dma_async_issue_pending(dma->chan);
-+ dma->is_active = true;
- }
- }
- }
---
-2.14.2
-
diff --git a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2017.3.bbappend b/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2017.3.bbappend
deleted file mode 100644
index 83b08f1..0000000
--- a/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2017.3.bbappend
+++ /dev/null
@@ -1,8 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/linux-xlnx:"
-
-SRC_URI_append_zybo-linux-bd-zynq7 = " \
- file://0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch \
- file://0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch \
- file://0003-drm-xilinx-Fix-DPMS-transition-to-on.patch \
- "
-
--
2.7.4
More information about the meta-xilinx
mailing list