[meta-xilinx] [meta-xilinx-bsp][PATCH 1/2] zcu104-zynqmp.conf: Add support for zcu104 evaluation board

[Manjukumar Matha]

From: Jaewon Lee <jaewon.lee at xilinx.com>

The ZCU104 Evaluation Kit enables designers to jumpstart designs for
embedded vision applications such as surveillance, Advanced Driver
Assisted Systems (ADAS), machine vision, Augmented Reality (AR), drones
and medical imaging. This kit features a Zynq® UltraScale+™ MPSoC EV
device with video codec and supports many common peripherals and
interfaces for embedded vision use case. The included ZU7EV device is
equipped with a quad-core ARM® Cortex™-A53 applications processor,
dual-core Cortex-R5 real-time processor, Mali™-400 MP2 graphics
processing unit, 4KP60 capable H.264/H.265 video codec, and 16nm FinFET+
programmable logic.

Add support for the zcu104 evaluation board which has the following
main features:

MPSoC XCZU7EV-2FFVC1156 device
Quad-core ARM Cortex-A53 APU
Dual-core ARM Cortex-R5 RPU
Mali-400 GPU
VCU

Signed-off-by: Jaewon Lee <jaewon.lee at xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha at xilinx.com>
---
 meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf | 35 +++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf

diff --git a/meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf
new file mode 100644
index 0000000..d963a8b
--- /dev/null
+++ b/meta-xilinx-bsp/conf/machine/zcu104-zynqmp.conf
@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: zcu104-zynqmp
+#@DESCRIPTION: Machine support for ZCU104 Evaluation Board.
+#
+
+require conf/machine/include/tune-zynqmp.inc
+require conf/machine/include/machine-xilinx-default.inc
+require conf/machine/include/machine-xilinx-board.inc
+include conf/machine/include/zynqmp-pmu-config.inc
+
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+
+UBOOT_MACHINE = "xilinx_zynqmp_zcu104_revC_defconfig"
+SPL_BINARY = "spl/boot.bin"
+
+SERIAL_CONSOLE ?= "115200 ttyPS0"
+
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+KERNEL_DEVICETREE = "xilinx/zynqmp-zcu104-revC.dtb"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx"
+PREFERRED_PROVIDER_virtual/pmu-firmware ?= "zynqmp-pmu-pmu-firmware"
+
+EXTRA_IMAGEDEPENDS += " \
+		u-boot-zynq-uenv \
+		arm-trusted-firmware \
+		virtual/pmu-firmware \
+		virtual/boot-bin \
+		"
+IMAGE_BOOT_FILES += "uEnv.txt atf-uboot.ub ${KERNEL_IMAGETYPE}-zynqmp-zcu104-revC.dtb"
+
+MACHINE_HWCODECS = "libomxil-xlnx"
+
-- 
2.7.4