[meta-xilinx] A query on the AES-ZU7EV-1-SK-G 's Yocto support for the Xilinx's ZCU106's VCU TRD.

[Dennis Mungai]

Ok, thanks for the clarification.

AVNET has already provided us with the appropriate board files, that should
get us started on the correct path.

Warm regards,

Dennis.

On Mon, 19 Nov 2018 at 15:11, Luca Ceresoli <luca at lucaceresoli.net> wrote:

> Hi Dennis,
>
> On 15/11/18 16:26, Dennis Mungai wrote:
> > Hello there,
> >
> > I'm currently in possession of the aforementioned device, the
> > AES-ZU7EV-1-SK-G, link:
> >
> https://www.avnet.com/shop/us/products/avnet-engineering-services/aes-zu7ev-1-sk-g-3074457345634251668/
> >
> > According to AVNET, its' based on the ZCU106 platform, see:
> > https://www.xilinx.com/products/boards-and-kits/zcu106.html#hardware
> >
> > With that in mind, I went ahead and built a Yocto image for the 2018.2
> > TRD, here:
> >
> https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842038/Zynq+UltraScale+MPSoC+VCU+TRD+2018.2+-+Design+Module+3
>
> The TRD for ZCU106 will not work on a different board. The SoC is
> similar, but not equal, and the rest of the hardware is totally different.
>
> You can reuse most of the principles from the TRD, but you have to
> reimplement it on your own hardware, unless Avnet provides a working
> configuration. At the very least you'll need to use the proper
> part/board in your Vivado project and a devicetree for the Avnet board
> (the zedboard.org site has some support files for that).
>
> --
> Luca
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20181119/324ecf20/attachment.html>