[meta-xilinx] Build and boot zcu106 image

[Mike Looijmans]

On 03-06-19 16:25, Manjukumar Harthikote Matha wrote:
> Hi Mike,
> 
>> -----Original Message-----
>> From: meta-xilinx-bounces at yoctoproject.org <meta-xilinx-
>> bounces at yoctoproject.org> On Behalf Of Mike Looijmans
>> Sent: Monday, June 3, 2019 7:01 AM
>> To: meta-xilinx at yoctoproject.org
>> Subject: [meta-xilinx] Build and boot zcu106 image
>>
>> Got a zcu106 board here to experiment with. With pre-built stuff, the board
>> boots okay.
>>
>> I cloned OpenEmbedded and meta-xilinx "thud" branches, made no changes.
>>
>> Built the PMU firmware and core-image-minimal for machine zcu106-zynqmp.
>>
> 
> I had similar issue! I think the PMU default config objects in SPL flow does not work.
> Luca had config object which worked for him.


And what is the solution?


There's nothing "machine" dependent in the PMU recipe, so all ZynqMP machines 
will build the exact same binary. Right?

My first attempt was actually to use my "standard" PMU stuff (patched PMU with 
built-in config object) for the image, but that also delivered the same error.


> 
> Thanks,
> Manju
>> Copied the usual files onto an SD card: atf-uboot.ub boot.bin Image system.dtb
>> u-boot.bin uEnv.txt zynqmp-zcu106-revA.dtb
>>
>> Put the card in the board and switch it on. All I get is this:
>>
>> <debug_uart> Debug uart enabled
>> "Synchronous Abort" handler, esr 0x96000040
>> ELR:     fffc9e70
>> LR:      fffc6c78
>> x0 : fdfd00011dfdfe5d x1 : 0000000000000000
>> x2 : 0202ffff020201a3 x3 : fdfd00011dfdfe5d
>> x4 : 0000000000000000 x5 : 0000000000000000
>> x6 : 00000000ffff7f20 x7 : 0000000000000005
>> x8 : 00000000000000ad x9 : 0000000000000080
>> x10: 000000000000fffd x11: 0000000000000064
>> x12: 00000000fffffe6a x13: 60f8a90300b080a0
>> x14: 8a10070a42650000 x15: a5cc22ca484081d9
>> x16: 385a360321460003 x17: 9b800c890e560844
>> x18: 00000000ffff7e90 x19: 0000000020000000
>> x20: 0000000000000000 x21: fdfd00011dfdfe5d
>> x22: 0000000000000000 x23: 0000000000000001
>> x24: 00000000ffff7f20 x25: 00000000fffdae68
>> x26: 00000000fffdae68 x27: 00000000fffdb000
>> x28: 0000000000000000 x29: 00000000ffff7c10
>>
>> Resetting CPU ...
>>
>> ### ERROR ### Please RESET the board ###
>>
>>
>> What does one have to do to actually boot that board with meta-xilinx?
>> --
>> _______________________________________________
>> meta-xilinx mailing list
>> meta-xilinx at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-xilinx