[meta-xilinx] Ultra 96 support

[Manjukumar Harthikote Matha]

Hi Philip,

> -----Original Message-----
> From: meta-xilinx-bounces at yoctoproject.org [mailto:meta-xilinx-
> bounces at yoctoproject.org] On Behalf Of Philip Balister
> Sent: Monday, March 04, 2019 11:31 AM
> To: meta-xilinx at yoctoproject.org
> Subject: [meta-xilinx] Ultra 96 support
> 
> I've started looking at the Ultra 96 patches from way back and have a few
> comments, all against master:
> 
> 
> The file
> meta-xilinx-bsp/recipes-microblaze/gcc/gcc-source_7.%.bbappend
> b/meta-xilinx-bsp/recipes-microblaze/gcc/gcc-source_7.%.bbappend
> no longer has a file to append.
> 

We will have a RFC ready hopefully end of week on GCC8. It is under regression test run.

> A tune file has been renamed:
> 
> -require conf/machine/include/arm/arch-armv8.inc
> +require conf/machine/include/arm/arch-armv8a.inc
> 

This patch is sent on mailing list


> Nothing provides:
> 
> -               virtual/pmu-firmware \
> 
> 
> And U-boot isn't building, not sure why. This seems to be the porblem:
> 
> ake[4]: 'arch/arm/dts/zynqmp-zcu100-revC.dtb' is up to date.
> test -e arch/arm/dts/zynqmp-zcu100-revC.dtb || (
> 
>                 \
> echo >&2;                                                       \
> echo >&2 "Device Tree Source is not correctly specified.";      \
> echo >&2 "Please define 'CONFIG_DEFAULT_DEVICE_TREE'";          \
> echo >&2 "or build with 'DEVICE_TREE=<device_tree>' argument";  \
> echo >&2;                                                       \
> /bin/false)
> make -f
> /home/balister/opensdr/zynq/ultra96/sdr-build-ultra96/build/tmp-
> glibc/work/ultra96_zynqmp-oe-linux/u-boot-xlnx/v2018.01-xilinx-
> v2018.3+gitAUTOINC+d8fc4b3b70-r0/git/scripts/Makefile.build
> obj=spl/drivers/clk
> make -f
> /home/balister/opensdr/zynq/ultra96/sdr-build-ultra96/build/tmp-
> glibc/work/ultra96_zynqmp-oe-linux/u-boot-xlnx/v2018.01-xilinx-
> v2018.3+gitAUTOINC+d8fc4b3b70-r0/git/scripts/Makefile.build
> obj=spl/drivers/core
> ( cd
> /home/balister/opensdr/zynq/ultra96/sdr-build-ultra96/build/tmp-
> glibc/work/ultra96_zynqmp-oe-linux/u-boot-xlnx/v2018.01-xilinx-
> v2018.3+gitAUTOINC+d8fc4b3b70-r0/git
> && test -r ../../../../../..//.bin ) \
>         || ( echo "Cannot read ../../../../../..//.bin" && false ) Cannot read
> ../../../../../..//.bin
> 
> 

Will check on this

Thanks,
Manju