[meta-xilinx] zynqmp support in warrior branch

[Adrian Fiergolski]

Hi,

I am experiencing issue booting a custom board based on ZynqMP+ device.
The boot process stops at ATF:

U-Boot SPL 2019.01 (Oct 23 2019 - 10:34:53 +0000)
EL Level:       EL3
Trying to boot from MMC2
NOTICE:  ATF running on XCZU6EG/silicon v4/RTL5.1 at 0xfffea000
NOTICE:  BL31: Secure code at 0x0
NOTICE:  BL31: Non secure code at 0x8000000
NOTICE:  BL31: v2.0(release):xilinx-v2019.1
NOTICE:  BL31: Built : 15:12:20, Oct 22 2019

I checked with debugger and apparently, ATF fails to launch u-boot image.

As mu setup, what is reflected properly in the device-tree, uses 2 SD
controllers, just as a precaution, I applied two patches on PMU (link
<https://github.com/topic-embedded-products/meta-topic/tree/master/recipes-bsp/pmu-firmware/pmu-firmware>),
including the one enabling NODE_SD0 for the cores.

Has anybody experienced a similar issue? Can somebody confirm a
successful run of ZynqMP+ based platform with warrior branch?

Regards,

Adrian

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-xilinx/attachments/20191023/86579946/attachment.html>