[meta-xilinx] Building Linux 5.2 for Zynq with Yocto

Franz Forstmayr f.forstmayr at gmail.com
Fri Sep 27 07:42:44 PDT 2019 

Hi Mike,

yeah I thought so too, but I'm unable to build the kernel. I get
always the error no rule to make target uImage.... , see below.
This test is fine without having an optimized NAND/QSPI driver.
The only thing I changed in the Xilinx recipe are:

LINUX_VERSION = "5.2"
KBRANCH = "master"
SRCREV = "0ec...."

# Add zynq defconfig here as it's not mainline
SRC_URI_append = " file://git/arch/arm/configs/xilinx_zynq_defconfig "

Build Configuration:
BB_VERSION           = "1.40.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "universal"
TARGET_SYS           = "arm-poky-linux-gnueabi"
MACHINE              = "zedboard-zynq7"
DISTRO               = "poky"
DISTRO_VERSION       = "2.6.3"
TUNE_FEATURES        = "arm armv7a vfp thumb neon callconvention-hard cortexa9"
TARGET_FPU           = "hard"
meta
meta-poky            = "thud:e6949336479e611a142834b6d9241514cbaeaf80"
meta-xilinx-bsp      = "rel-v2019.1:f4c53cc332397b5e5ee17f42169f7c87808c9dc7"
meta-xilinx-tools    = "master:881132b62dc01e57b8d9ace458a0005528179e14"
meta-oe
meta-python         = "thud:2d088d252624b19df384aecc434d23afb636178f"

Initialising tasks: 100% |#######################################| Time: 0:00:00
Sstate summary: Wanted 7 Found 0 Missed 7 Current 68 (0% match, 90% complete)
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: linux-xlnx-5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0
do_compile: oe_runmake failed
ERROR: linux-xlnx-5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0
do_compile: Function failed: do_compile (log file is located at
/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/temp/log.do_compile.13182)
ERROR: Logfile of failure stored in:
/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/temp/log.do_compile.13182
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 8 HOSTCC=gcc
-isystem/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native/usr/include
-O2 -pipe -L/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native/usr/lib
-L/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native/lib
-Wl,-rpath-link,/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native/usr/lib
-Wl,-rpath-link,/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native/lib
-Wl,-rpath,/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native/usr/lib
-Wl,-rpath,/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native/lib
-Wl,-O1 -Wl,--allow-shlib-undefined
-Wl,--dynamic-linker=/media/franz/HDD_Linux/yocto/zynq/tmp/sysroots-uninative/x86_64-linux/lib/ld-linux-x86-64.so.2
HOSTCPP=gcc  -E uImage CC=arm-poky-linux-gnueabi-gcc
-mno-thumb-interwork -marm -fuse-ld=bfd
-fdebug-prefix-map=/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0=/usr/src/debug/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0
-fdebug-prefix-map=/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot=
-fdebug-prefix-map=/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/recipe-sysroot-native=
 -fdebug-prefix-map=/media/franz/HDD_Linux/yocto/zynq/tmp/work-shared/zedboard-zynq7/kernel-source=/usr/src/kernel
  LD=arm-poky-linux-gnueabi-ld.bfd   UIMAGE_LOADADDR=0x8000
| make: * No rule to make target 'uImage'.  Stop.
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at
/media/franz/HDD_Linux/yocto/zynq/tmp/work/zedboard_zynq7-poky-linux-gnueabi/linux-xlnx/5.3-xilinx-v2019.1+gitAUTOINC+4d856f72c1-r0/temp/log.do_compile.13182)
ERROR: Task (/media/franz/HDD_Linux/yocto/zynq/layers/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 481 tasks of which 480 didn't need to
be rerun and 1 failed.

Summary: 1 task failed:
  /media/franz/HDD_Linux/yocto/zynq/layers/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb:do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.



-----------------------------------------------------------------------------------------------------------------------------

Von: meta-xilinx-bounces at yoctoproject.org
<meta-xilinx-bounces at yoctoproject.org> im Auftrag von Mike Looijmans
<mike.looijmans at topicproducts.com>
Gesendet: Freitag, 27. September 2019 15:57
An: meta-xilinx at yoctoproject.org
Betreff: Re: [meta-xilinx] Building Linux 5.2 for Zynq with Yocto

You can use a mainline kernel with the Zynq (thus not using any xilinx
repositories whatsoever), but some drivers are of insufficient quality and
never got upstreamed to mainline. I think the QSPI and NAND controllers are in
that category.



Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
Postbus 440, 5680 AK Best
The Netherlands

T: +31 (0) 499 33 69 69
E: {E-mail
W: www.topicproducts.com

Please consider the environment before printing this e-mail
On 26-09-19 19:07, Franz Forstmayr wrote:
> Hi,
>
> is there an easy way to quick&dirty upgrade the linux kernel to 5.2+
> for testing some particular features from the new kernel?
> I tried to upgrade the SRC_URI and the Version from the meta-xilinx
> linux-xlnx recipe, but I get the following error:
>
> | make: *** No rule to make target 'uImage'.  Stop.
> | ERROR: oe_runmake failed
>
> Are there some modifications in the Xilinx Kernel to prevent this kind of issue?
>
> Best regards
> Franz
>

-- 
_______________________________________________
meta-xilinx mailing list
meta-xilinx at yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-xilinx

More information about the meta-xilinx mailing list