[poky] Kernel firmware?

[Joshua Lock]

On Tue, 2011-01-18 at 04:36 -0700, Gary Thomas wrote:
> On 01/17/2011 09:49 AM, Gary Thomas wrote:
> > On 01/17/2011 06:28 AM, Gary Thomas wrote:
> >> On 01/17/2011 06:10 AM, Joshua Lock wrote:
> >>> On Mon, 2011-01-17 at 05:53 -0700, Gary Thomas wrote:
> >>>> On 01/17/2011 02:23 AM, Joshua Lock wrote:
> >>>>> Hi Gary,
> >>>>>
> >>>>> On Sun, 2011-01-16 at 05:30 -0700, Gary Thomas wrote:
> >>>>>> I'm trying to get various USB WiFi dongles working on my
> >>>>>> BeagleBoard (or look-alike). Many of these require runtime
> >>>>>> downloads of firmware. However, these files don't seem to
> >>>>>> be installed in Poky:
> >>>>>> phy1 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
> >>>>>> rt73usb 2-1.2.4:1.0: firmware: requesting rt73.bin
> >>>>>> phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
> >>>>>>
> >>>>>> Is there some way to enable this?
> >>>>>
> >>>>> There's a linux-firmware recipe
> >>>>> (meta/recipes-kernel/linux-firmware/linux-firmware_git.bb) which you'll
> >>>>> have to modify to package the required firmware (at the moment we only
> >>>>> package firmware for the Libertas sd8686) and ensure that the packages
> >>>>> are included in your images.
> >>>>
> >>>> I don't see anywhere that linux-firmware-sd8686 is included in
> >>>> an image. Am I missing something?
> >>>
> >>> You need to have something pull in the required linux-firmware, for
> >>> example the igep0020 and igep0030 machines add linux-firmware-sd8686 to
> >>> the MACHINE_EXTRA_RRECOMMENDS.
> >>
> >> Thanks. Doing it this way wasn't totally clear from "ensure that the
> >> packages are included in your images."
> >>
> >> It's working now.
> >
> > My exuberance was a bit premature. Indeed, I rebuilt my install
> > image, but the firmware package wasn't installed. On my target,
> > I see:
> > root at cobra3530p60:~# opkg list-installed linux*
> > root at cobra3530p60:~# opkg list linux*
> > linux-firmware-rt73 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
> > Firmware files for use with Linux kernel
> > linux-firmware-sd8686 - 0.0+git0+40c0f950be7040614dc45df54e25e54d00e3b73b-r0 - Firmware files for use with Linux kernel
> > Firmware files for use with Linux kernel
> > linux-libc-headers-dbg - 2.6.36-r0 - Debugging files for linux-libc-headers
> > Debugging files for linux-libc-headers
> > linux-libc-headers-dev - 2.6.36-r0 - Development files for linux-libc-headers
> > Development files for linux-libc-headers
> >
> > To be clear, all I did was add "linux-firmware-rt73" to MACHINE_EXTRA_RRECOMMENDS
> > in my <MACHINE>.conf file, then rebuild the image using:
> > % bitbake poky-image-sato
> > This was from a previously built tree, etc. Did I need to do anything
> > else to get the package actually installed at build time?
> >
> > Note: If I 'opkg install linux-firmware-rt73' on my target, I get
> > the correct files. I'd just like to understand how to make it happen
> > in the "image"
> 
> I don't see any kernel modules get installed in one of Poky's
> "supported" platforms either.  I just tried
>    MACHINE=igep0030 bitbake poky-image-minimal
> in a clean tree.  No kernel modules:
> 
> [gthomas at titan igep_test]$ ls tmp/work/igep0030-poky-linux-gnueabi/poky-image-minimal-1.0-r0/rootfs/lib
> ld-2.12.1.so               libattr.so.1.1.0    libgcc_s.so.1            libnss_dns-2.12.1.so    librt-2.12.1.so
> ld-linux.so.3              libc-2.12.1.so      libgudev-1.0.so.0        libnss_dns.so.2         librt.so.1
> libBrokenLocale-2.12.1.so  libc.so.6           libgudev-1.0.so.0.0.1    libnss_files-2.12.1.so  libudev.so.0
> libBrokenLocale.so.1       libcidn-2.12.1.so   libm-2.12.1.so           libnss_files.so.2       libudev.so.0.9.3
> libacl.so.1                libcidn.so.1        libm.so.6                libproc-3.2.8.so        libutil-2.12.1.so
> libacl.so.1.1.0            libcrypt-2.12.1.so  libnsl-2.12.1.so         libpthread-2.12.1.so    libutil.so.1
> libanl-2.12.1.so           libcrypt.so.1       libnsl.so.1              libpthread.so.0         modules
> libanl.so.1                libdl-2.12.1.so     libnss_compat-2.12.1.so  libresolv-2.12.1.so     udev
> libattr.so.1               libdl.so.2          libnss_compat.so.2       libresolv.so.2
> 
> Am I missing something?  Should I file a bug?
> 

Yes, please file a bug.

Cheers,
Joshua
-- 
Joshua Lock
        Intel Open Source Technology Centre