[poky] [PATCH 1/2] module: build and clean hostprogs for each module

Fri Mar 4 13:31:23 PST 2011

On 03/04/2011 12:33 PM, Darren Hart wrote:
> On 03/04/2011 03:44 AM, Gary Thomas wrote:
>> On 03/03/2011 09:39 PM, Darren Hart wrote:
>>> On 03/03/2011 08:59 AM, Gary Thomas wrote:
>>>> On 03/03/2011 09:50 AM, Gary Thomas wrote:
>>>>> On 03/02/2011 11:00 AM, Darren Hart wrote:
>>>>>> From: Darren Hart<dvhart at linux.intel.com>
>>>>>>
>>>>>> This fixes [BUGID #241]
>>>>>>
>>>>>> The kernel hostprogs are built for the host architecture. They should
>>>>>> not
>>>>>> be deployed with to the target, and they should not be included in an
>>>>>> sstate
>>>>>> package which might get reused on a host of a different architecture.
>>>>>>
>>>>>> As we don't build many out-of-tree modules, this patch takes the
>>>>>> approach
>>>>>> of building the hostprogs as part of the module compile process
>>>>>> with a
>>>>>> do_compile_prepend() routine in module.bbclass. To ensure the
>>>>>> hostprogs
>>>>>> don't contaminate the build, they are removed in do_install_append().
>>>>>>
>>>>>> Signed-off-by: Darren Hart<dvhart at linux.intel.com>
>>>>>> CC: Gary Thomas<gary at mlbassoc.com>
>>>>>
>>>>> Sadly, this doesn't seem to work for me. I don't see any indication in
>>>>> run.do_compile that the extra steps were added at all.
>>>>>
>>>>> Will it matter if my recipe overrides the do_compile() method?
>>>>>
>>>>
>>>> Also, when you tested this, what was your target MACHINE (in
>>>> particular,
>>>> was the target a different architecture than the build host?) I ask
>>>> because
>>>> I tried to just manually insert the compile_prepend() functions into my
>>>> recipe and it ended up trying to build host tools (that's what the fuss
>>>> is all about) using the target toolchain.
>>>
>>> I made some modifications to avoid a Race that RP pointed out (just
>>> removed the cleans from the module.bbclass since they weren't
>>> necessary anyway). With this, I set my MACHINE to
>>> beagleboard and built minimal. You can see from the following that
>>> hostprogs were build for the host and the module for the target:
>>>
>>> dvhart at rage:build-beagleboard$ file
>>> ./tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+e2737075b79e4fc682e41051cf1c0bc47a47d502_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux-beagleboard-standard-build/scripts/basic/fixdep
>>>
>>>
>>>
>>> ./tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+e2737075b79e4fc682e41051cf1c0bc47a47d502_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux-beagleboard-standard-build/scripts/basic/fixdep:
>>>
>>>
>>> ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically
>>> linked (uses shared libs), for GNU/Linux 2.6.15, not stripped
>>
>> Why are you looking in ${KERNEL_SRC}? It may not exist (think rm_work)
>> when your module gets built.
>>
>> The example recipe I have uses ${STAGING_KERNEL_DIR} something like this:
>> make -C ${STAGING_KERNEL_DIR} M=src
>>
>
> module.bbclass passes KERNEL_SRC=${STAGING_KERNEL_DIR} to the module's
> Makefile.
>
> I don't use STAGING_KERNEL_DIR in the hello-mod Makefile as I wanted the
> Makefile to exemplary of external modules, and not poky specific.
>
>
>> Also, if you look at the run.do_compile script for your module recipe, is
>> there any indication that the compile_prepend() stuff was even added?
>
> I do see the compile_prepend() code prepended to the do_compile code:
>
> unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
> oe_runmake CC="arm-poky-linux-gnueabi-gcc "
> LD="arm-poky-linux-gnueabi-ld
> --sysroot=/home/dvhart/source/poky.git/build-beagleboard/tmp/sysroots/beagleboard
> " AR="arm-poky-linux-gnueabi-ar " \
> -C
> /home/dvhart/source/poky.git/build-beagleboard/tmp/sysroots/beagleboard/kernel
> scripts
>
> Hrm.... but looking at that, that's the target compiler... not the host
> compiler... so why on earth did this work.... grumble. Some more
> investigation remains it seems...

Actually, this isn't a problem. For the compilation of hostprogs, the 
kernel Make system uses HOSTCC, not CC. From log.do_compile:

make -C 
/home/dvhart/source/poky.git/build-beagleboard/tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+e2737075b79e4fc682e41051cf1c0bc47a47d502_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux 
O=/home/dvhart/source/poky.git/build-beagleboard/tmp/sysroots/beagleboard/kernel/. 
scripts
make[1]: Entering directory 
`/home/dvhart/source/poky.git/build-beagleboard/tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+e2737075b79e4fc682e41051cf1c0bc47a47d502_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux'
   HOSTCC  scripts/basic/fixdep
   HOSTCC  scripts/basic/docproc
   GEN 
/home/dvhart/source/poky.git/build-beagleboard/tmp/sysroots/beagleboard/kernel/Makefile
   HOSTCC  scripts/kconfig/conf.o
   HOSTCC  scripts/kconfig/kxgettext.o
   HOSTCC  scripts/kconfig/zconf.tab.o
   HOSTLD  scripts/kconfig/conf

While the module itself builds with:

make -C 
/home/dvhart/source/poky.git/build-beagleboard/tmp/work/beagleboard-poky-linux-gnueabi/linux-yocto-2.6.37+git1+e2737075b79e4fc682e41051cf1c0bc47a47d502_1+2b412826bbeb4a16abe2ea74f2456ab880c6e3c1-r16/linux 
O=/home/dvhart/source/poky.git/build-beagleboard/tmp/sysroots/beagleboard/kernel/.
   LD 
/home/dvhart/source/poky.git/build-beagleboard/tmp/work/beagleboard-poky-linux-gnueabi/hello-mod-0.1-r0/built-in.o
   CC [M] 
/home/dvhart/source/poky.git/build-beagleboard/tmp/work/beagleboard-poky-linux-gnueabi/hello-mod-0.1-r0/hello.o
   Building modules, stage 2.
   MODPOST 1 modules
   CC 
/home/dvhart/source/poky.git/build-beagleboard/tmp/work/beagleboard-poky-linux-gnueabi/hello-mod-0.1-r0/hello.mod.o
   LD [M] 
/home/dvhart/source/poky.git/build-beagleboard/tmp/work/beagleboard-poky-linux-gnueabi/hello-mod-0.1-r0/hello.ko

Things are working as intended for the hello-mod recipe.

--
Darren

>
>
>  > I don't see it in mine (yes, it inherits module)
>
> Even though there is something up with the script build above, you
> should be seeing it in run.do_compile. Is this recipe something you can
> share? Also, have you tried from a clean build? I ran into various
> (strange) problems because I wasn't cleaning the right
> tasks/recipes/etc. I think your problem is different, but might have a
> similar cause.
>
> --
> Darren
>
>>
>>>
>>> dvhart at rage:build-beagleboard$ file
>>> ./tmp/work/beagleboard-poky-linux-gnueabi/hello-world-mod-1.0-r0/package/lib/modules/2.6.37.2-yocto-standard+/extra/hello_world.ko
>>>
>>>
>>> ./tmp/work/beagleboard-poky-linux-gnueabi/hello-world-mod-1.0-r0/package/lib/modules/2.6.37.2-yocto-standard+/extra/hello_world.ko:
>>>
>>> ELF 32-bit LSB relocatable, ARM, version 1
>>> (SYSV), not stripped
>>>
>>> I'm going to do a beagleboard boot test, but if that works I'll be
>>> resending these changes to close BUG 241 as they work on both qemux86
>>> and beagleboard using hello-world-mod which
>>> uses a very typical out-of-tree kernel module Make setup.
>>>
>>
>
>

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel