[poky] [PATCH 00/71][KERNEL] crownbay: patches for 2.6.37
Tom Zanussi
tom.zanussi at intel.com
Wed Mar 30 12:49:22 PDT 2011
From: Tom Zanussi <tom.zanussi at intel.com>
This is a large patchset that reflects a lot of post-2.6.37 activity
but that we need for the crownbay 2.6.37 upgrade.
Due to the large number, the patches themselves aren't posted here -
please see the branch for those.
Please pull.
Pull URL: git://git.pokylinux.org/linux-yocto-2.6.37-contrib.git
Branch: tzanussi/crownbay-2.6.37-machine
Browse: http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=tzanussi/crownbay-2.6.37-machine
Axel Lin (1):
drivers/misc/pch_phub.c: add MODULE_DEVICE_TABLE
Denis Turischev (1):
pch_uart: reference clock on CM-iTC
Jesper Juhl (1):
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
Justin P. Mattock (1):
spi/topcliff: Typo fix threhold to threshold
Michał Mirosław (1):
net: Fix too optimistic NETIF_F_HW_CSUM features
Rakib Mullick (1):
drivers, pch_dma: Fix warning when CONFIG_PM=n.
Richard Röjfors (2):
usb: pch_udc: Fix compile error, warnings and checkpatch warnings
usb: pch_udc: Fix setup transfers with data out
Tejun Heo (1):
pch_gbe: don't use flush_scheduled_work()
Tom Zanussi (4):
pch_uart: move to drivers/tty/serial/
From 5ac387d983149d4658aad17242d24eef85a43fa8 Mon Sep 17 00:00:00
2001 From: Randy Dunlap <randy.dunlap at oracle.com> Date: Thu, 2 Dec
2010 09:19:48 -0800 Subject: [PATCH] serial: fix pch_uart kconfig &
build
commit 1c5189976ffc130416e808f41049c12615a6380c Author: Tomoya
MORINAGA <tomoya-linux at dsn.okisemi.com> Date: Thu Dec 16 16:13:29
2010 +0900
From 89bf67f1f080c947c92f8773482d9e57767ca292 Mon Sep 17 00:00:00
2001 From: Eric Dumazet <eric.dumazet at gmail.com> Date: Mon, 22 Nov
2010 00:15:06 +0000 Subject: [PATCH] drivers/net: use vzalloc()
Tomoya (30):
can: EG20T PCH: add prefix to macro
can: EG20T PCH: use BIT(X)
can: EG20T PCH: Separate Interface Register(IF1/IF2)
can: EG20T PCH: Change Message Object Index
can: EG20T PCH: Enumerate LEC macros
can: EG20T PCH: Delete unnecessary spin_lock
pch_can: Add flow control processing
pch_can: Divide poll function
pch_can: Fix endianness issue
pch_can: Improve rx processing
pch_can: Fix warnings
pch_can: Rename function/macro name
pch_can: Change functions type
pch_can: Reduce register access
pch_can: Change Copyright and module description
pch_can: Replace netdev_dbg instead of dev_dbg partly
pch_can: Fix coding rule violation
pch_can: Delete unnecessary/redundant code
pch_can: Fix bit timing calculation issue
pch_can: Fix miss-setting status issue
pch_can: Comment optimization
pch_can: Move MSI processing to probe/remove processing
pch_can: Fix incorrect return processing
pch_can: Optimize "if" condition in rx/tx processing
pch_can: Add setting TEC/REC statistics processing
pch_can: Replace netif_rx to netif_receive_skb
pch_can: Fix array miss-pointing issue
pch_can: fix 800k comms issue
pch_can: fix rmmod issue
pch_can: fix module reload issue with MSI
Tomoya MORINAGA (20):
pch_can: fix tseg1/tseg2 setting issue
pch_phub: add new device ML7213
Serial: EG20T: add PCH_UART driver
serial: pch_uart: support new device ML7213
pch_uart: add multi-scatter processing
pch_uart: add spin_lock_init
pch_uart : Reduce memcpy
pch_uart : Use dev_xxx not pr_xxx
pch_uart: fix uart clock setting issue
pch_uart: fix auto flow control miss-setting issue
pch_uart: fix exclusive access issue
pch_uart: Fix DMA channel miss-setting issue.
serial: pch_uart: revert Kconfig for non-DMA mode
pch_dma: support new device ML7213 IOH
pch_dma: fix kernel error issue
pch_dma: set the number of array correctly
spi/topcliff_pch: Fix data transfer issue
USB: pch_udc: support new device ML7213 IOH
i2c-eg20t: add driver for Intel EG20T
i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH
Toshiharu Okada (7):
pch_gbe: Fix the issue which a driver locks when rx offload is set by
ethtool
pch_gbe: Fix the issue that the receiving data is not normal.
pch_gbe: Fix the MAC Address load issue.
USB device driver of Topcliff PCH
usb: pch_udc: Fixed issue which does not work with g_serial
usb: pch_udc: Fix the worning log issue at gadget driver remove
usb: pch_udc: Fixed issue which does not work with g_ether
Wolfram Sang (1):
i2c-eg20t: include slab.h for memory allocations
drivers/char/Kconfig | 1 +
drivers/dma/Kconfig | 9 +-
drivers/dma/pch_dma.c | 54 +-
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-eg20t.c | 938 ++++++++++
drivers/misc/Kconfig | 7 +-
drivers/misc/pch_phub.c | 86 +-
drivers/net/benet/be_main.c | 6 +-
drivers/net/bnx2x/bnx2x_main.c | 4 +-
drivers/net/can/pch_can.c | 1355 +++++++---------
drivers/net/jme.c | 16 +-
drivers/net/pch_gbe/pch_gbe.h | 2 +-
drivers/net/pch_gbe/pch_gbe_ethtool.c | 19 +-
drivers/net/pch_gbe/pch_gbe_main.c | 130 +-
drivers/net/sc92031.c | 3 +-
drivers/net/stmmac/stmmac_ethtool.c | 12 +-
drivers/net/stmmac/stmmac_main.c | 5 +-
drivers/net/vxge/vxge-ethtool.c | 2 +-
drivers/net/vxge/vxge-main.c | 2 +-
drivers/serial/Kconfig | 1 -
drivers/serial/Makefile | 2 +
drivers/spi/spi_topcliff_pch.c | 12 +-
drivers/tty/serial/Kconfig | 21 +
drivers/tty/serial/Makefile | 6 +
drivers/tty/serial/pch_uart.c | 1601 ++++++++++++++++++
drivers/usb/gadget/Kconfig | 27 +
drivers/usb/gadget/Makefile | 1 +
drivers/usb/gadget/gadget_chips.h | 7 +
drivers/usb/gadget/pch_udc.c | 3002 +++++++++++++++++++++++++++++++++
net/core/dev.c | 7 +-
net/core/ethtool.c | 4 +-
32 files changed, 6429 insertions(+), 925 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-eg20t.c
create mode 100644 drivers/tty/serial/Kconfig
create mode 100644 drivers/tty/serial/Makefile
create mode 100644 drivers/tty/serial/pch_uart.c
create mode 100644 drivers/usb/gadget/pch_udc.c
More information about the poky
mailing list