[poky] beagleboard and latest from git

[Robert Berger]

Hi,

I switched a bit around between various versions in the meantime and
that's what I figured out:

1) the latest u-boot (or some configuration of it) from git does not
seem to work for the beagleboard

2) if I use U-Boot 2011.03-00038-g8d4addc-dirty (May 13 2011 - 00:01:02)
which comes with bernard-5.0.1 things look much better.

U-Boot 2010.12-00038-g8d4addc-dirty (May 13 2011 - 08:44:08) is the
suspect. Why does the latest and greatest from git use an older u-boot
version than bernard 5.0.1?

I interrupt the u-boot autoboot and do the following:

OMAP3 beagleboard.org # sete console "ttyO2,115200n8"
OMAP3 beagleboard.org # mmc rescan ${mmcdev}
OMAP3 beagleboard.org # run loaduimage
reading uImage

2632316 bytes read
OMAP3 beagleboard.org # run mmcboot

and voila:

Yocto (Built by Poky 5.0) 1.0+snapshot-20110512 beagleboard ttyO2

beagleboard login: root
root at beagleboard:~#

This time even with networking.

This means that the latest and greatest rootfs seems OK.

Regards,

Robert


..."It is NOT portable (uses 386 task switching etc), and it probably
never will support anything other than AT-harddisks, as that's all I
have :-(." - Linus Benedict Torvalds(torvalds at klaava.Helsinki.FI),
1991-08-25 23:12:08 PST -

My public pgp key is available at:
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x90320BF1