[poky] [PATCH 1/1] routerstationpro: swap KERNEL_IMAGETYPE and KERNEL_ALT_IMAGETYPE

[Michel Thebeau]

On 13-03-28 03:32 PM, michel.thebeau at windriver.com wrote:
> From: Michel Thebeau <michel.thebeau at windriver.com>
> 
> The routerstationpro has a 16mb flash which the kernel image should
> fit into.  The default build type for vmlinux then should be the
> stripped arch/mips/boot/vmlinux.bin.
> 
> Swapping KERNEL_IMAGETYPE and KERNEL_ALT_IMAGETYPE for rsp causes
> vmlinux.bin to be linked in tmp/deploy/images instead of vmlinux, and
> causes vmlinux.bin to appear in the kernel rpm file.
> 
> [YOCTO #3515]
> 
> Signed-off-by: Bruce Ashfield <bruce.ashfield at windriver.com>
> Signed-off-by: Michel Thebeau <michel.thebeau at windriver.com>
> ---
>  meta-yocto-bsp/conf/machine/routerstationpro.conf |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/meta-yocto-bsp/conf/machine/routerstationpro.conf b/meta-yocto-bsp/conf/machine/routerstationpro.conf
> index e5e4d1a..a727e2a 100644
> --- a/meta-yocto-bsp/conf/machine/routerstationpro.conf
> +++ b/meta-yocto-bsp/conf/machine/routerstationpro.conf
> @@ -6,8 +6,8 @@ require conf/machine/include/tune-mips32.inc
>  
>  MACHINE_FEATURES = "screen keyboard pci usbhost ext2 ext3 serial"
>  
> -KERNEL_IMAGETYPE = "vmlinux"
> -KERNEL_ALT_IMAGETYPE = "vmlinux.bin"
> +KERNEL_ALT_IMAGETYPE = "vmlinux"
> +KERNEL_IMAGETYPE = "vmlinux.bin"

I'd noted in email that arch/mips/boot/vmlinux.bin is looks like the
stripped file we were looking for.  But it doesn't load:

RedBoot> load -m tftp -h 192.168.1.6 mthebeau/vmlinux.bin
Unrecognized image type: 0x0

I was able to load the larger vmlinux and boot it.

And as previously noted by ,  using
tmp/sysroots/x86_64-linux/usr/bin/mips32-poky-linux/mips-poky-linux-strip would
get a bootable image as well from the vmlinux.

I'll try to figure out what the difference is between that and vmlinux.bin.

M


>  
>  PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
>  PREFERRED_VERSION_linux-yocto ?= "3.4%"
>