[poky] [PATCH 1/2] beagleboard: upgrade u-boot to the latest version

[Liming Wang]

Now the latest version of u-boot is 2013.07 and it depends on
its own MLO, instead of x-load, as the Second Program Loader. So remove
x-load and use u-boot's MLO.

And also replace u-boot.bin with u-boot.img as the u-boot image file.

Signed-off-by: Liming Wang <liming.wang at windriver.com>
---
 meta-yocto-bsp/conf/machine/beagleboard.conf |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/meta-yocto-bsp/conf/machine/beagleboard.conf b/meta-yocto-bsp/conf/machine/beagleboard.conf
index 6633880..5f4c55a 100644
--- a/meta-yocto-bsp/conf/machine/beagleboard.conf
+++ b/meta-yocto-bsp/conf/machine/beagleboard.conf
@@ -13,7 +13,7 @@ XSERVER ?= "xserver-xorg \
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
 
 # Allow for MMC booting (required by the NAND-less Beagleboard XM)
-EXTRA_IMAGEDEPENDS += "u-boot x-load"
+EXTRA_IMAGEDEPENDS += "u-boot"
 
 # Uncomment the following line to enable the hard floating point abi. Note that
 # this breaks some binary libraries and 3D (neither of which ship with
@@ -33,6 +33,8 @@ PREFERRED_VERSION_linux-yocto ?= "3.4%"
 
 KERNEL_IMAGETYPE = "uImage"
 
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
 UBOOT_MACHINE = "omap3_beagle_config"
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
-- 
1.7.9.5