[poky] how to set u-boot in meta-machine

[Gary Thomas]

On 2016-06-28 11:55, tab wrote:
> Hi,
> I'm going to build a linux distro for LeMaker Guitar with yocto project and I've meet some problems, hope you can help me:
>   I refer this page(http://www.yoctoproject.org/docs/2.1/bsp-guide/bsp-guide.html) to build a layer named 'meta-guitar'
> with a custom
> kernel source (https://github.com/LeMaker/linux-actions).
> It seems nothing wrong during the building time and i get a 'meta-guitar' successfuly.
> But when i try to build a image with `bitbake core-image-minimal` i get a error:
>
> ERROR: u-boot-v2016.03+gitAUTOINC+df61a74e68-r0 do_compile: oe_runmake failed
> ERROR: u-boot-v2016.03+gitAUTOINC+df61a74e68-r0 do_compile: Function failed: do_compile (log file is located at
> /home/tab/work/yocto/build/guitar/tmp/work/guitar-poky-linux-gnueabi/u-boot/v2016.03+gitAUTOINC+df61a74e68-r0/temp/log.do_compi
> le.16108)
>
> and the logfile says: Configuration file ".config" not found.
>
> It seems that I need to do something with the u-boot while building the meta-guitar?
> But there's no more info about the u-boot while I'm building meta-guitar, such as the path of the u-boot source file?
>   How can i solve this problem?
>   Hope for your help.
>
> Tab Liu

Try looking at some of the <MACHINE>.conf files in meta-fsl-arm
where you should be able to see how to set up the U-Boot build.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------