[Toaster] [review-request][PATCH] toaster: Fix import of custom layers from toasterjson.conf
sujith h
sujith.h at gmail.com
Wed Sep 2 01:42:48 PDT 2015
On Tue, Sep 1, 2015 at 10:39 PM, Brian Avery <avery.brian at gmail.com> wrote:
> Hi,
>
> I'm on the correct patch afaik. I put the toasterconf.json into the
> directory above poky and loaded it with:
> poky/bitbake/lib/toaster/manage.py loadconf
> /home/bavery/src/intel/myBugs2/sujith/toasterconf.json
>
This is not my latest patch which I worked on :) It was with subject: [PATCH]
toaster: Import external layers outside poky from toasterconf.json
> I also used option 0 so that toaster did not attempt to load the
> layers from openembedded.
>
> My branch for this test is:
>
> http://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/?h=bavery%2Fsubmit%2Fsujith%2F20150827_custom_layer_import
>
> I ran a build of core-image-sato with qtbase and iw set in
> IMAGE_INSTALL_append for the project.
>
> The results:
> The good-
> I got a core-image-sato as well as the qt5 and iw packages; so the build
> worked.
>
> The not so good -
> 1) My build progress bar did not update.
> 2) my recipe list after the build looks like:
>
> https://www.dropbox.com/s/qs7hulsbmcgg4ik/Screenshot%202015-09-01%2010.02.29.png?dl=0
> 3) in the build directory I set when starting up toaster (where the
> tmp/deploy ends up among other things) the toaster_ui.log file was
> filled with errors (it ended up being 17G by the end of the build).
> I'm attaching the first 120 lines of it so you can see what it looked
> like.
>
> I would like to share my poky and cloned_layers directory and the ui log
file attached:
------------
sujith at kdekidd0:~/MEL/test_poky$ pwd
/home/sujith/MEL/test_poky
sujith at kdekidd0:~/MEL/test_poky$ ls -lt
total 16488
-rw-r--r-- 1 sujith sujith 16855040 Sep 2 13:46 toaster.sqlite
drwxrwxr-x 3 sujith sujith 4096 Sep 2 13:45 toaster_build_artifacts
drwxr-xr-x 8 sujith sujith 4096 Sep 2 13:43 build
drwxrwxr-x 11 sujith sujith 4096 Sep 2 10:01 poky
-rw-rw-r-- 1 sujith sujith 4632 Aug 28 12:21 toasterconf.json
drwxrwxr-x 6 sujith sujith 4096 Aug 28 11:53 venv
sujith at kdekidd0:~/MEL/test_poky$ ls ../cloned_layers/ -l
total 8
drwxrwxr-x 19 sujith sujith 4096 Aug 28 11:51 meta-oe
drwxrwxr-x 8 sujith sujith 4096 Aug 28 12:10 meta-qt5
sujith at kdekidd0:~/MEL/test_poky$
------------
Now the step done to load configuration:
------------
sujith at kdekidd0:~/MEL/test_poky$ source venv/bin/activate
(venv)sujith at kdekidd0:~/MEL/test_poky$ ./poky/bitbake/bin/toaster
Syncing...
Creating tables ...
Creating table auth_permission
Creating table auth_group_permissions
Creating table auth_group
Creating table auth_user_groups
Creating table auth_user_user_permissions
Creating table auth_user
Creating table django_content_type
Creating table django_session
Creating table django_admin_log
Creating table south_migrationhistory
You just installed Django's auth system, which means you don't have any
superusers defined.
Would you like to create one now? (yes/no): yes
Username (leave blank to use 'sujith'):
Email address:
Password:
Password (again):
Superuser created successfully.
Installing custom SQL ...
Installing indexes ...
Installed 0 object(s) from 0 fixture(s)
Synced:
> django.contrib.auth
> django.contrib.contenttypes
> django.contrib.messages
> django.contrib.sessions
> django.contrib.admin
> django.contrib.staticfiles
> django.contrib.humanize
> south
Not synced (use migrations):
- bldcontrol
- orm
(use ./manage.py migrate to migrate these)
Running migrations for orm:
- Migrating forwards to 0024_auto__add_field_recipe_is_image.
> orm:0001_initial
> orm:0002_auto__add_field_build_timespent
> orm:0003_timespent
- Migration 'orm:0003_timespent' is marked for no-dry-run.
> orm:0004_auto__add_field_package_installed_name
>
orm:0005_auto__add_target_image_file__add_target_file__add_field_variablehistor
>
orm:0006_auto__add_field_target_image_size__add_field_target_license_manifest_p
> orm:0007_auto__add_helptext
>
orm:0008_auto__chg_field_variablehistory_operation__chg_field_recipe_descriptio
>
orm:0009_auto__add_projectvariable__add_projectlayer__add_projecttarget__add_pr
>
orm:0010_auto__add_field_project_branch__add_field_project_short_description__a
> orm:0011_auto__add_field_projectlayer_dirpath
>
orm:0012_auto__add_field_projectlayer_optional__add_field_projecttarget_task
>
orm:0013_auto__add_release__add_layerversiondependency__add_unique_layerversion
>
orm:0014_auto__chg_field_package_summary__chg_field_layer_summary__chg_field_re
>
orm:0015_auto__add_field_layer_vcs_web_url__add_field_layer_vcs_web_tree_base_u
>
orm:0016_auto__add_field_release_helptext__chg_field_release_branch__add_index_
>
orm:0017_auto__del_toastersettingdefaultlayer__add_releaselayersourcepriority__
> orm:0018_auto__add_field_layer_version_project
> orm:0019_auto__add_buildartifact
>
orm:0020_auto__add_field_layer_version_local_path__add_field_recipe_pathflags__
>
orm:0021_auto__chg_field_build_project__chg_field_project_bitbake_version__chg_
>
orm:0022_auto__add_field_target_task__add_field_layer_version_local_path__del_f
>
orm:0023_auto__del_field_build_warnings_no__del_field_build_errors_no__del_fiel
> orm:0024_auto__add_field_recipe_is_image
- Loading initial data for orm.
Installed 0 object(s) from 0 fixture(s)
Running migrations for bldcontrol:
- Migrating forwards to 0008_brarchive.
> bldcontrol:0001_initial
>
bldcontrol:0002_auto__add_field_buildenvironment_sourcedir__add_field_buildenvironment
> bldcontrol:0003_auto__add_field_brlayer_dirpath
> bldcontrol:0004_loadinitialdata
- Migration 'bldcontrol:0004_loadinitialdata' is marked for no-dry-run.
> bldcontrol:0005_auto__add_brerror
> bldcontrol:0006_auto__add_brbitbake
>
bldcontrol:0007_auto__add_field_buildrequest_environment__chg_field_buildrequest_build
> bldcontrol:0008_brarchive
- Migration 'bldcontrol:0008_brarchive' is marked for no-dry-run.
- Loading initial data for bldcontrol.
Installed 0 object(s) from 0 fixture(s)
Toaster needs to know in which directory it can download build log files
and other artifacts.
Toaster suggests "/home/sujith/MEL/test_poky/toaster_build_artifacts/".
Press Enter to select
"/home/sujith/MEL/test_poky/toaster_build_artifacts/" or type the full path
to a different directory:
Verifying the Build Environment. If the local Build Environment is not
properly configured, you will be asked to configure it.
-- Validation: The checkout directory must be set.
Toaster needs to know in which directory it should check out the layers
that will be needed for your builds.
Toaster suggests "/home/sujith". If you select this directory, a layer
like "meta-intel" will end up in "/home/sujith/meta-intel".
Press Enter to select "/home/sujith" or type the full path to a different
directory (must be a parent of current checkout directory):
Verifying the Build Environment. If the local Build Environment is not
properly configured, you will be asked to configure it.
-- Validation: The build directory must be set.
Toaster needs to know where is your build directory.
The build directory is where all the artifacts created by your builds will
be stored. Type the full path to the directory (for example: "
/home/sujith/build")/home/sujith/MEL/test_poky/build
Build configuration saved
Verifying the Build Environment. If the local Build Environment is not
properly configured, you will be asked to configure it.
Toaster can use a SINGLE predefined configuration file to set up default
project settings and layer information sources.
Toaster will list now the configuration files that it found. Select the
number to use the desired configuration file.
[1] - /home/sujith/MEL/toaster_work/poky/meta-yocto/conf/toasterconf.json
[2] - /home/sujith/MEL/cedar/poky/meta-yocto/conf/toasterconf.json
[3] -
/home/sujith/MEL/toaster_MEL_final/poky/meta-yocto/conf/toasterconf.json
[4] - /home/sujith/MEL/test_poky/poky/meta-yocto/conf/toasterconf.json
[5] -
/home/sujith/MEL/upstream_poky_work/poky-contrib/meta-yocto/conf/toasterconf.json
[6] - /home/sujith/gitroot/poky/meta-yocto/conf/toasterconf.json
[0] - Exit without importing any file
Enter your option: 0
Starting webserver...
Webserver address: http://0.0.0.0:8000/
Starting browser...
Toaster is now running. You can stop it with Ctrl-C
^Z
[1]+ Stopped ./poky/bitbake/bin/toaster
(venv)sujith at kdekidd0:~/MEL/test_poky$ ./poky/bitbake/lib/toaster/manage.py
loadconf toasterconf.json
(venv)sujith at kdekidd0:~/MEL/test_poky$ fg
./poky/bitbake/bin/toaster
2015-09-02 10:11:54,415 DEBUG localhostbecontroller, our git repos are
{(u'', u'HEAD'): [('bitbake', u'bitbake')],
(u'git://git.yoctoproject.org/poky', u'HEAD'): [(u'openembedded-core',
u'meta'),
(u'meta-yocto',
u'meta-yocto'),
(u'meta-yocto-bsp',
u'meta-yocto-bsp')],
(u'git://github.com/meta-qt5/meta-qt5.git', u'HEAD'): [(u'meta-qt5',
u'meta-qt5')],
(u'git://github.com/openembedded/meta-oe.git', u'HEAD'): [(u'meta-python',
u'meta-python'),
(u'meta-multimedia',
u'meta-multimedia'),
(u'meta-filesystems',
u'meta-filesystems'),
(u'meta-networking',
u'meta-networking'),
(u'meta-oe',
u'meta-oe')]}
2015-09-02 10:11:54,416 DEBUG lbc_shellcmmd: (/home/sujith/Documents) git
remote -v
2015-09-02 10:11:54,419 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,419 DEBUG lbc_shellcmmd: (/home/sujith/.thumbnails) git
remote -v
2015-09-02 10:11:54,422 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,422 DEBUG lbc_shellcmmd: (/home/sujith/.emacs.d) git
remote -v
2015-09-02 10:11:54,425 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,425 DEBUG lbc_shellcmmd: (/home/sujith/Templates) git
remote -v
2015-09-02 10:11:54,429 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,429 DEBUG lbc_shellcmmd: (/home/sujith/.pylint.d) git
remote -v
2015-09-02 10:11:54,432 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,432 DEBUG lbc_shellcmmd: (/home/sujith/.cscache) git
remote -v
2015-09-02 10:11:54,439 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,439 DEBUG lbc_shellcmmd: (/home/sujith/.config) git
remote -v
2015-09-02 10:11:54,443 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,443 DEBUG lbc_shellcmmd: (/home/sujith/bin) git remote
-v
2015-09-02 10:11:54,448 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,448 DEBUG lbc_shellcmmd: (/home/sujith/MEL) git remote
-v
2015-09-02 10:11:54,452 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,452 DEBUG lbc_shellcmmd: (/home/sujith/Pictures) git
remote -v
2015-09-02 10:11:54,455 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,455 DEBUG lbc_shellcmmd: (/home/sujith/.pip) git remote
-v
2015-09-02 10:11:54,459 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,459 DEBUG lbc_shellcmmd: (/home/sujith/Music) git
remote -v
2015-09-02 10:11:54,463 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,463 DEBUG lbc_shellcmmd: (/home/sujith/debian) git
remote -v
2015-09-02 10:11:54,466 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,466 DEBUG lbc_shellcmmd: (/home/sujith/.distlib) git
remote -v
2015-09-02 10:11:54,470 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,470 DEBUG lbc_shellcmmd: (/home/sujith/.mozilla) git
remote -v
2015-09-02 10:11:54,473 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,474 DEBUG lbc_shellcmmd: (/home/sujith/Django_study)
git remote -v
2015-09-02 10:11:54,478 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,478 DEBUG lbc_shellcmmd: (/home/sujith/.java) git
remote -v
2015-09-02 10:11:54,481 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,482 DEBUG lbc_shellcmmd: (/home/sujith/patches_to_push)
git remote -v
2015-09-02 10:11:54,485 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,485 DEBUG lbc_shellcmmd: (/home/sujith/.ssh) git remote
-v
2015-09-02 10:11:54,488 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,488 DEBUG lbc_shellcmmd: (/home/sujith/Downloads) git
remote -v
2015-09-02 10:11:54,492 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,492 DEBUG lbc_shellcmmd: (/home/sujith/.pki) git remote
-v
2015-09-02 10:11:54,495 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,496 DEBUG lbc_shellcmmd: (/home/sujith/Public) git
remote -v
2015-09-02 10:11:54,499 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,499 DEBUG lbc_shellcmmd: (/home/sujith/.repoconfig) git
remote -v
2015-09-02 10:11:54,502 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,502 DEBUG lbc_shellcmmd: (/home/sujith/.pc) git remote
-v
2015-09-02 10:11:54,505 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,505 DEBUG lbc_shellcmmd: (/home/sujith/wsgiref) git
remote -v
2015-09-02 10:11:54,510 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,510 DEBUG lbc_shellcmmd: (/home/sujith/.mentor) git
remote -v
2015-09-02 10:11:54,513 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,515 DEBUG lbc_shellcmmd:
(/home/sujith/MENTOR_TOOLCHAIN) git remote -v
2015-09-02 10:11:54,517 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,518 DEBUG lbc_shellcmmd: (/home/sujith/Desktop) git
remote -v
2015-09-02 10:11:54,521 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,521 DEBUG lbc_shellcmmd: (/home/sujith/.local) git
remote -v
2015-09-02 10:11:54,525 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,525 DEBUG lbc_shellcmmd: (/home/sujith/.dbus) git
remote -v
2015-09-02 10:11:54,529 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,529 DEBUG lbc_shellcmmd: (/home/sujith/workspace) git
remote -v
2015-09-02 10:11:54,532 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,533 DEBUG lbc_shellcmmd: (/home/sujith/.gstreamer-0.10)
git remote -v
2015-09-02 10:11:54,536 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,536 DEBUG lbc_shellcmmd: (/home/sujith/.gnome) git
remote -v
2015-09-02 10:11:54,540 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,540 DEBUG lbc_shellcmmd: (/home/sujith/.cache) git
remote -v
2015-09-02 10:11:54,544 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,544 DEBUG lbc_shellcmmd:
(/home/sujith/codebench-linux-install-2014.11-96-arm) git remote -v
2015-09-02 10:11:54,547 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,547 DEBUG lbc_shellcmmd: (/home/sujith/Videos) git
remote -v
2015-09-02 10:11:54,550 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,550 DEBUG lbc_shellcmmd: (/home/sujith/.gconf) git
remote -v
2015-09-02 10:11:54,554 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,555 DEBUG lbc_shellcmmd: (/home/sujith/.subversion) git
remote -v
2015-09-02 10:11:54,558 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,558 DEBUG lbc_shellcmmd: (/home/sujith/.thunderbird)
git remote -v
2015-09-02 10:11:54,561 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,561 DEBUG lbc_shellcmmd: (/home/sujith/gitroot) git
remote -v
2015-09-02 10:11:54,564 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,564 DEBUG lbc_shellcmmd: (/home/sujith/.oe) git remote
-v
2015-09-02 10:11:54,568 WARNING localhostbecontroller: shellcmd error
command: git remote -v
fatal: Not a git repository (or any of the parent directories): .git
2015-09-02 10:11:54,570 DEBUG localhostbecontroller: current layer list
[u'/home/sujith/MEL/test_poky/poky/meta',
u'/home/sujith/MEL/test_poky/poky/meta-yocto',
u'/home/sujith/MEL/test_poky/poky/meta-yocto-bsp',
u'/home/sujith/MEL/cloned_layers/meta-oe/meta-python',
u'/home/sujith/MEL/cloned_layers/meta-oe/meta-multimedia',
u'/home/sujith/MEL/cloned_layers/meta-oe/meta-filesystems',
u'/home/sujith/MEL/cloned_layers/meta-oe/meta-networking',
u'/home/sujith/MEL/cloned_layers/meta-oe/meta-oe',
u'/home/sujith/MEL/cloned_layers/meta-qt5']
2015-09-02 10:11:54,571 DEBUG lbc_shellcmmd: (/home/sujith) bash -c "source
/home/sujith/MEL/test_poky/poky/oe-init-build-env
/home/sujith/MEL/test_poky/build"
2015-09-02 10:11:54,684 DEBUG localhostbecontroller: shellcmd success
2015-09-02 10:11:54,691 DEBUG localhostbecontroller: running the listener
at /home/sujith/MEL/test_poky/poky/bitbake/bin/bitbake
2015-09-02 10:11:54,691 DEBUG localhostbecontroller: starting builder
bash -c "source /home/sujith/MEL/test_poky/poky/oe-init-build-env
/home/sujith/MEL/test_poky/build 2>&1 >toaster_server.log && bitbake --read
/home/sujith/MEL/test_poky/build/conf/toaster-pre.conf --postread
/home/sujith/MEL/test_poky/build/conf/toaster.conf --server-only -t xmlrpc
-B 0.0.0.0:0 2>&1 >>toaster_server.log "
2015-09-02 10:11:54,691 DEBUG lbc_shellcmmd: (/home/sujith) bash -c "source
/home/sujith/MEL/test_poky/poky/oe-init-build-env
/home/sujith/MEL/test_poky/build 2>&1 >toaster_server.log && bitbake --read
/home/sujith/MEL/test_poky/build/conf/toaster-pre.conf --postread
/home/sujith/MEL/test_poky/build/conf/toaster.conf --server-only -t xmlrpc
-B 0.0.0.0:0 2>&1 >>toaster_server.log "
2015-09-02 10:11:56,198 DEBUG localhostbecontroller: shellcmd success
2015-09-02 10:11:56,199 DEBUG localhostbecontroller: Found bitbake server
port 33000
2015-09-02 10:11:56,200 DEBUG localhostbecontroller: Waiting bitbake server
to start
2015-09-02 10:11:56,701 DEBUG localhostbecontroller: Waiting bitbake server
to start
2015-09-02 10:11:57,202 DEBUG localhostbecontroller: Waiting bitbake server
to start
2015-09-02 10:11:57,704 DEBUG localhostbecontroller: Waiting bitbake server
to start
2015-09-02 10:11:58,205 DEBUG localhostbecontroller: Started bitbake server
2015-09-02 10:11:58,236 DEBUG localhostbecontroller: Build launched,
exiting. Follow build logs at
/home/sujith/MEL/test_poky/build/toaster_ui.log
------------
The path to tmp/deploy/image and the content inside the directory:
------------
sujith at kdekidd0:~/MEL/test_poky/build$ ls tmp/deploy/images/qemux86/ -lt
total 1244112
lrwxrwxrwx 1 sujith sujith 53 Sep 2 13:43
core-image-sato-qemux86.tar.bz2 ->
core-image-sato-qemux86-20150902044346.rootfs.tar.bz2
lrwxrwxrwx 1 sujith sujith 50 Sep 2 13:43
core-image-sato-qemux86.ext3 ->
core-image-sato-qemux86-20150902044346.rootfs.ext3
lrwxrwxrwx 1 sujith sujith 50 Sep 2 13:43
core-image-sato-qemux86.ext4 ->
core-image-sato-qemux86-20150902044346.rootfs.ext4
lrwxrwxrwx 1 sujith sujith 54 Sep 2 13:43
core-image-sato-qemux86.manifest ->
core-image-sato-qemux86-20150902044346.rootfs.manifest
lrwxrwxrwx 1 sujith sujith 51 Sep 2 13:43
core-image-sato-qemux86.jffs2 ->
core-image-sato-qemux86-20150902044346.rootfs.jffs2
-rw-r--r-- 1 sujith sujith 196083712 Sep 2 13:43
core-image-sato-qemux86-20150902044346.rootfs.jffs2
-rw-r--r-- 1 sujith sujith 535930880 Sep 2 13:42
core-image-sato-qemux86-20150902044346.rootfs.ext4
-rw-r--r-- 1 sujith sujith 535930880 Sep 2 13:42
core-image-sato-qemux86-20150902044346.rootfs.ext3
-rw-r--r-- 1 sujith sujith 154285168 Sep 2 13:42
core-image-sato-qemux86-20150902044346.rootfs.tar.bz2
-rw-r--r-- 1 sujith sujith 21112 Sep 2 13:41
core-image-sato-qemux86-20150902044346.rootfs.manifest
-rw-r--r-- 2 sujith sujith 294 Sep 2 13:40
README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
lrwxrwxrwx 1 sujith sujith 71 Sep 2 12:53 bzImage ->
bzImage--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.bin
lrwxrwxrwx 1 sujith sujith 71 Sep 2 12:53 bzImage-qemux86.bin ->
bzImage--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.bin
lrwxrwxrwx 1 sujith sujith 71 Sep 2 12:53 modules-qemux86.tgz ->
modules--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.tgz
-rw-rw-r-- 2 sujith sujith 83308568 Sep 2 12:53
modules--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.tgz
-rw-r--r-- 2 sujith sujith 6957488 Sep 2 12:53
bzImage--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.bin
sujith at kdekidd0:~/MEL/test_poky/build$
------------
The screenshot of image built successfully: http://i.imgur.com/V3qtXFh.png
> ---
> So, you may want to look at/try my poky-contrib branch and look
> closely at my toasterconf.json file to see if you can tell why you do
> not see these issues.
>
The toaster-pre.conf of mine looks as:
sujith at kdekidd0:~/MEL/test_poky/build/conf$ cat toaster-pre.conf
IMAGE_INSTALL_append=" qtbase iw"
PACKAGE_CLASSES="package_ipk"
MACHINE="qemux86"
SDKMACHINE="x86_64"
DISTRO="poky"
IMAGE_FSTYPES="ext3 jffs2 tar.bz2"
TOASTER_BRBE="1:1"
sujith at kdekidd0:~/MEL/test_poky/build/conf$
Somehow I am not able to figure out what is going on wrong at your end :(
>
> -brian
>
> On Sun, Aug 30, 2015 at 11:47 PM, sujith h <sujith.h at gmail.com> wrote:
> > Hi Brian,
> >
> > On Sat, Aug 29, 2015 at 1:13 AM, Brian Avery <avery.brian at gmail.com>
> wrote:
> >>
> >> Hi Sujith,
> >>
> >> The new toasterconf does make it easier to test, thanks! I've
> >> attached mine so you can see what I did in case that caused any of the
> >> issues below.
> >> I changed:
> >> 1) directory paths
> >> 2) you had "branches": ["mel", "yocto", "HEAD"], which i
> >> changed to "branches": ["HEAD", "master", "fido",
> >> "dizzy"],
> >>
> >>
> >>
> >> So here is my directory layout
> >>
> >> /big/src/intel/myBugs2
> >> cloned_layers/
> >> meta-oe/
> >> meta-qt5/
> >> sujith/
> >> poky
> >
> >
> > Here is my directory layout:
> > /home/sujith/MEL/test_poky
> > poky
> > /home/sujith/MEL/cloned_layers
> > meta-oe
> > meta-qt5
> >
> >>
> >>
> >> I put the attached toasterconf.json into the sujith/meta-yocto/conf/
> >> directory (overwriting the default one) and toaster found it on
> >> startup.
> >
> >
> > I have added my configuration into:
> > /home/sujith/MEL/test_poky/toasterconf.json
> >
> > I never tried over writing toasterconf.json file in meta-yocto/conf
> >
> > I use option [0] while running poky/bitbake/bin/toaster i.e, exit without
> > importing any layers. Then I manually try to import it using command:
> > poky/bitbake/lib/toaster/manage.py loadconf toasterconf.json
> >
> >> Question:
> >> Where are you putting your toasterconf.json file? I haven't gone
> >> through the search logic yet but toaster seemed to have trouble
> >> finding it in other directories.
> >>
> >> My directory settings for starting toaster are:
> >> build log -> /home/bavery/toaster_build_artifacts
> >> layer checkout -> /big/src/intel/myBugs2/sujith/
> >> build -> /home/bavery/toaster_build_artifacts
> >>
> >>
> >> I found the following issues:
> >> 1)On startup toaster complained about not being able to load from
> >> openembedded.layers.org and once toaster was up, there were no layers
> >> available except the local ones.
> >>
> >> (
> https://www.dropbox.com/s/jdkayha71l8i9fe/Screenshot%202015-08-28%2012.29.06.png?dl=0
> )
> >> 2) I started a build of core-image-sato with MAGE_INSTALL_append =
> >> "qt5 iws"
> >> (
> https://www.dropbox.com/s/m3l6uyxq6ptr5vv/Screenshot%202015-08-28%2012.32.16.png?dl=0
> )
> >> and the build no longer shows progress on the progress bar. top
> >> running shows that I am well into the build but that is not reflected
> >> in the UI
> >> (
> https://www.dropbox.com/s/x3cl2whp2twt8xm/Screenshot%202015-08-28%2012.32.44.png?dl=0
> )
> >> 3) the toaster_ui.log in the build directory is huge and is filled
> >> with things like :Cannot determine the vcs_reference for layer version
> >> {'build_id': 1, '_layer_cache': <Layer: __FIXME__unidentified_layer /
> >> None >, 'layer_id': 204, '_state': <django.db.models.base.ModelSt...."
> >>
> >>
> >>
> >> Do you see any of these?
> >
> >
> > Since I haven't tried overwriting toasters default configuration file, I
> > couldn't hit with any of these errors. Would you mind to try with my
> way, if
> > you don't mind?
> > Let me know if you face any issue with the procedure I followed.
> >
> >
> > Thanks,
> > Sujith H
> >>
> >>
> >> -b
> >>
> >> On Fri, Aug 28, 2015 at 12:06 AM, sujith h <sujith.h at gmail.com> wrote:
> >> >
> >> >
> >> > On Thu, Aug 27, 2015 at 9:56 PM, sujith h <sujith.h at gmail.com> wrote:
> >> >>
> >> >>
> >> >>
> >> >> On Thu, Aug 27, 2015 at 9:36 PM, Brian Avery <avery.brian at gmail.com>
> >> >> wrote:
> >> >>>
> >> >>> Hi Sujith,
> >> >>>
> >> >>> I'd like to test this out. Is it possible to get a config file that
> >> >>> exercises the new features?
> >> >>
> >> >>
> >> >> I have attached the toaster configuration file which I used for
> >> >> testing.
> >> >> What you can also do is remove meta-mentor,meta-sourcery and
> meta-mx6q
> >> >> layers from the
> >> >> configuration file. And try with the layers we have. That might help
> >> >> you
> >> >> in testing. Also you
> >> >> may have to remove some additional settings I have used in the
> >> >> configuration, like Distro as "mel",
> >> >> toolchain path etc
> >> >>
> >> >> Or the simplest testing would be by adding poky and meta-oe layer.
> Then
> >> >> try to build
> >> >> some recipe from meta-oe. That would be the simplest test.
> >> >>
> >> >> Let me know if you need more information or face any issues. I would
> >> >> help
> >> >> you with that.
> >> >
> >> >
> >> > Hi Brian,
> >> >
> >> > I have attached a new configuration file which I am testing right
> away.
> >> > The
> >> > build is in progress.
> >> > In the IMAGE_INSTALL_append ( from UI ), I have added qtbase and iw
> >> > packages. The 2 repos I have
> >> > cloned is:
> >> > git clone git://github.com/meta-qt5/meta-qt5.git
> >> > and
> >> > git clone git://github.com/openembedded/meta-oe.git
> >> >
> >> > Accordingly adjust your paths mentioned in the configuration file.
> >> >
> >> > I hope this configuration file should help you proceed with your test.
> >> > Let
> >> > me know if you face any issues.
> >> >
> >> > Thanks,
> >> > Sujith H
> >> >>
> >> >>
> >> >> Thanks,
> >> >> Sujith H
> >> >>>
> >> >>>
> >> >>> -b
> >> >>>
> >> >>>
> >> >>> On Mon, Aug 24, 2015 at 7:16 PM, sujith h <sujith.h at gmail.com>
> wrote:
> >> >>> > On 24 Aug 2015 6:49 pm, "sujith h" <sujith.h at gmail.com> wrote:
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >> On Fri, Aug 21, 2015 at 8:07 PM, Damian, Alexandru
> >> >>> >> <alexandru.damian at intel.com> wrote:
> >> >>> >>>
> >> >>> >>>
> >> >>> >>>
> >> >>> >>> On Fri, Aug 21, 2015 at 1:52 PM, sujith h <sujith.h at gmail.com>
> >> >>> >>> wrote:
> >> >>> >>>>
> >> >>> >>>>
> >> >>> >>>>
> >> >>> >>>> On Fri, Aug 21, 2015 at 4:45 PM, Damian, Alexandru
> >> >>> >>>> <alexandru.damian at intel.com> wrote:
> >> >>> >>>>>
> >> >>> >>>>> Hi,
> >> >>> >>>>>
> >> >>> >>>>> I think we need a better patch description. If I understand
> >> >>> >>>>> correctly,
> >> >>> >>>>> the issue you were facing is:
> >> >>> >>>>> - even if we have layers at HEAD that are not under the poky/
> >> >>> >>>>> tree,
> >> >>> >>>>> the
> >> >>> >>>>> code would always return the
> >> >>> >>>>> checkout path in the poky/ tree; I recognize that this is a
> >> >>> >>>>> valid
> >> >>> >>>>> issue.
> >> >>> >>>>>
> >> >>> >>>>> I feel that this issue can be handled a bit differently if we
> >> >>> >>>>> frame
> >> >>> >>>>> it
> >> >>> >>>>> as such:
> >> >>> >>>>> - if we have a HEAD branch specified for a layer, we need to
> >> >>> >>>>> find
> >> >>> >>>>> out
> >> >>> >>>>> the current checkout directory for that layer, since no
> checkout
> >> >>> >>>>> would be
> >> >>> >>>>> performed.
> >> >>> >>>>>
> >> >>> >>>>> As such, when we import a toasterconf.json file (they only way
> >> >>> >>>>> to
> >> >>> >>>>> get
> >> >>> >>>>> HEAD branches for a layer) we need to store the actual layer
> >> >>> >>>>> checkout path
> >> >>> >>>>> in the database (in the localpath, perhaps?), and reuse that
> >> >>> >>>>> value,
> >> >>> >>>>> instead
> >> >>> >>>>> of employing special logic to search for it. What I mean, the
> >> >>> >>>>> core
> >> >>> >>>>> of the
> >> >>> >>>>> problem is solved by replacing the whole gitrepos checkout
> logic
> >> >>> >>>>> with a
> >> >>> >>>>> database value for all "HEAD" layers, and eliminate the magic
> in
> >> >>> >>>>> getGitCloneDirectory().
> >> >>> >>>>>
> >> >>> >>>>> I have a couple more comments on the patch below.
> >> >>> >>>>>
> >> >>> >>>>> Cheers,
> >> >>> >>>>> Alex
> >> >>> >>>>>
> >> >>> >>>>> On Fri, Aug 21, 2015 at 9:41 AM, Sujith H <sujith.h at gmail.com
> >
> >> >>> >>>>> wrote:
> >> >>> >>>>>>
> >> >>> >>>>>> This patch fixes import of custom layers from
> toasterjson.conf
> >> >>> >>>>>> file. For example it was verified using layers like
> >> >>> >>>>>> meta-mentor,
> >> >>> >>>>>> meta-fsl-arm, meta-sourcery etc.
> >> >>> >>>>>>
> >> >>> >>>>>> Signed-off-by: Sujith Haridasan <Sujith_Haridasan at mentor.com
> >
> >> >>> >>>>>> ---
> >> >>> >>>>>> .../toaster/bldcontrol/localhostbecontroller.py | 49
> >> >>> >>>>>> ++++++++++++++++++++--
> >> >>> >>>>>> .../bldcontrol/management/commands/loadconf.py | 12
> ++++--
> >> >>> >>>>>> 2 files changed, 54 insertions(+), 7 deletions(-)
> >> >>> >>>>>>
> >> >>> >>>>>> diff --git
> >> >>> >>>>>> a/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >> >>> >>>>>> b/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >> >>> >>>>>> index 231a7d3..c43f33f 100644
> >> >>> >>>>>> --- a/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >> >>> >>>>>> +++ b/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >> >>> >>>>>> @@ -178,7 +178,7 @@ class
> >> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >> >>> >>>>>> self.be.save()
> >> >>> >>>>>> logger.debug("localhostbecontroller: Stopped bitbake
> >> >>> >>>>>> server")
> >> >>> >>>>>>
> >> >>> >>>>>> - def getGitCloneDirectory(self, url, branch):
> >> >>> >>>>>> + def
> >> >>> >>>>>>
> >> >>> >>>>>> getGitCloneDirectory(self, url, branch, cached_layers=None):
> >> >>> >>>>>> """ Utility that returns the last component of a git
> >> >>> >>>>>> path
> >> >>> >>>>>> as
> >> >>> >>>>>> directory
> >> >>> >>>>>> """
> >> >>> >>>>>> import re
> >> >>> >>>>>> @@ -191,6 +191,17 @@ class
> >> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >> >>> >>>>>>
> >> >>> >>>>>> # word of attention; this is a localhost-specific
> >> >>> >>>>>> issue;
> >> >>> >>>>>> only
> >> >>> >>>>>> on the localhost we expect to have "HEAD" releases
> >> >>> >>>>>> # which _ALWAYS_ means the current poky checkout
> >> >>> >>>>>> + if cached_layers:
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> Using cached_layers here works only by coincidence - if the
> >> >>> >>>>> desired
> >> >>> >>>>> layer is not manually checked out under be.sourcedir, it will
> >> >>> >>>>> not
> >> >>> >>>>> be found
> >> >>> >>>>> by cached_layers code, and will not appear here.
> >> >>> >>>>
> >> >>> >>>>
> >> >>> >>>> Ah, so would it be good to read from the database? Because I
> was
> >> >>> >>>> giving
> >> >>> >>>> full path of layers in the toasterconf.json file. I assume that
> >> >>> >>>> layer
> >> >>> >>>> information from the toasterconf.json file would be updated in
> >> >>> >>>> the
> >> >>> >>>> database?
> >> >>> >>>
> >> >>> >>>
> >> >>> >>> Would be inserted into the database as the file is read.
> >> >>> >>>
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> I think a completely new piece of code is needed, which will
> >> >>> >>>>> track
> >> >>> >>>>> where any layer that has a HEAD branch is actually checked
> out.
> >> >>> >>>>> This path
> >> >>> >>>>> would be discovered and stored by importing a toasterconf.json
> >> >>> >>>>> file
> >> >>> >>>>> (the
> >> >>> >>>>> only place that can generate a HEAD branch), and verified to
> >> >>> >>>>> actually exist
> >> >>> >>>>> at build time in this function, getGitCloneDirectory(). This
> >> >>> >>>>> patch
> >> >>> >>>>> touches
> >> >>> >>>>> loadconf, but I think we might be able to get a better
> handling
> >> >>> >>>>> of
> >> >>> >>>>> that.
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>> + if not url.endswith('.git'):
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> I am not sure why the actual GIT url format is relevant for
> >> >>> >>>>> "HEAD"
> >> >>> >>>>> branches; we don't need to figure out where the layer would
> get
> >> >>> >>>>> checked out,
> >> >>> >>>>> but where it actually exists.
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>> + from os.path import dirname
> >> >>> >>>>>> + extractDir = dirname(url)
> >> >>> >>>>>> + for key, val in cached_layers.iteritems():
> >> >>> >>>>>> + if val == extractDir:
> >> >>> >>>>>> + local_checkout_path = key
> >> >>> >>>>>> + return cached_layers[local_checkout_path]
> >> >>> >>>>>> + else:
> >> >>> >>>>>> + local_checkout_path = cached_layers[url]
> >> >>> >>>>>> + return local_checkout_path
> >> >>> >>>>>> from os.path import dirname as DN
> >> >>> >>>>>> local_checkout_path =
> >> >>> >>>>>> DN(DN(DN(DN(DN(os.path.abspath(__file__))))))
> >> >>> >>>>>> #logger.debug("localhostbecontroller: using HEAD
> >> >>> >>>>>> checkout
> >> >>> >>>>>> in
> >> >>> >>>>>> %s" % local_checkout_path)
> >> >>> >>>>>> @@ -245,7 +256,14 @@ class
> >> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >> >>> >>>>>>
> >> >>> >>>>>> # 3. checkout the repositories
> >> >>> >>>>>> for giturl, commit in gitrepos.keys():
> >> >>> >>>>>> - localdirname = os.path.join(self.be.sourcedir,
> >> >>> >>>>>> self.getGitCloneDirectory(giturl, commit))
> >> >>> >>>>>> + if not giturl.endswith('.git'):
> >> >>> >>>>>> + for key, val in cached_layers.iteritems():
> >> >>> >>>>>> + if os.path.dirname(giturl) == val:
> >> >>> >>>>>> + tmpKey = key
> >> >>> >>>>>> + tmpVal = gitrepos[(giturl, commit)]
> >> >>> >>>>>> + gitrepos[(tmpKey, commit)] += tmpVal
> >> >>> >>>>>> + giturl = tmpKey
> >> >>> >>>>>> + localdirname = os.path.join(self.be.sourcedir,
> >> >>> >>>>>> self.getGitCloneDirectory(giturl, commit, cached_layers))
> >> >>> >>>>>> logger.debug("localhostbecontroller: giturl
> %s:%s
> >> >>> >>>>>> checking out in current directory %s" % (giturl, commit,
> >> >>> >>>>>> localdirname))
> >> >>> >>>>>>
> >> >>> >>>>>> # make sure our directory is a git repository
> >> >>> >>>>>> @@ -280,13 +298,36 @@ class
> >> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >> >>> >>>>>>
> >> >>> >>>>>> # verify our repositories
> >> >>> >>>>>> for name, dirpath in gitrepos[(giturl, commit)]:
> >> >>> >>>>>> - localdirpath = os.path.join(localdirname,
> >> >>> >>>>>> dirpath)
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> I am not sure what this change tries to do; dirpath is
> actually
> >> >>> >>>>> a
> >> >>> >>>>> path
> >> >>> >>>>> in the git repo where the layer lives; it is not immediate
> that
> >> >>> >>>>> the
> >> >>> >>>>> all the
> >> >>> >>>>> layers live in the top directory of a git repo. This change
> >> >>> >>>>> invalidates the
> >> >>> >>>>> check below, where we verify that the layer path actually
> exists
> >> >>> >>>>> after
> >> >>> >>>>> checkout.
> >> >>> >>>>>
> >> >>> >>>>>>
> >> >>> >>>>>> + localdirpath = localdirname
> >> >>> >>>>>>
> >> >>> >>>>>> logger.debug("localhostbecontroller:
> >> >>> >>>>>> localdirpath
> >> >>> >>>>>> expected '%s'" % localdirpath)
> >> >>> >>>>>> if not os.path.exists(localdirpath):
> >> >>> >>>>>> raise BuildSetupException("Cannot find
> >> >>> >>>>>> layer
> >> >>> >>>>>> git
> >> >>> >>>>>> path '%s' in checked out repository '%s:%s'. Aborting." %
> >> >>> >>>>>> (localdirpath,
> >> >>> >>>>>> giturl, commit))
> >> >>> >>>>>>
> >> >>> >>>>>> + layerlisturl, layerlistdir = "", ""
> >> >>> >>>>>> + layerlisturl = [localurl for localurl,
> >> >>> >>>>>> localpath
> >> >>> >>>>>> in
> >> >>> >>>>>> cached_layers.iteritems() if localpath == localdirpath]
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> I suspect this logic will go away if we're not going to use
> >> >>> >>>>> cached_layers to discover the local checkout directories for
> >> >>> >>>>> HEAD
> >> >>> >>>>> urls.
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>>
> >> >>> >>>>>> + if len(layerlisturl) != 0:
> >> >>> >>>>>> + layerlisturl = layerlisturl[0]
> >> >>> >>>>>> + if len(layerlisturl) == 0:
> >> >>> >>>>>> + if
> >> >>> >>>>>> os.path.basename(localdirpath).startswith("_"):
> >> >>> >>>>>> + layerlisturl = localdirpath
> >> >>> >>>>>> if name != "bitbake":
> >> >>> >>>>>> -
> layerlist.append(localdirpath.rstrip("/"))
> >> >>> >>>>>> + for gitlocal, localpath in
> >> >>> >>>>>> gitrepos.iteritems():
> >> >>> >>>>>> + if layerlisturl in gitlocal:
> >> >>> >>>>>> + if len(localpath) > 2:
> >> >>> >>>>>> + for paths in localpath:
> >> >>> >>>>>> + if "bitbake" not in
> >> >>> >>>>>> paths[1]:
> >> >>> >>>>>> + layerlistdir =
> >> >>> >>>>>> localdirpath
> >> >>> >>>>>> +"/" + str(paths[1])
> >> >>> >>>>>> + if layerlistdir not in
> >> >>> >>>>>> layerlist:
> >> >>> >>>>>> +
> >> >>> >>>>>> layerlist.append(layerlistdir.rstrip("/"))
> >> >>> >>>>>> + else:
> >> >>> >>>>>> +
> >> >>> >>>>>> layerlist.append(localdirpath.rstrip("/"))
> >> >>> >>>>>> + break
> >> >>> >>>>>> + if len(layerlist) == 0:
> >> >>> >>>>>> + for gitlocal, localpath in
> >> >>> >>>>>> gitrepos.iteritems():
> >> >>> >>>>>> + for paths in localpath:
> >> >>> >>>>>> + if "bitbake" not in paths:
> >> >>> >>>>>> +
> >> >>> >>>>>> layerlist.append(layerlisturl +
> >> >>> >>>>>> "/"
> >> >>> >>>>>> + str(paths[1]))
> >> >>> >>>>>> +
> >> >>> >>>>>>
> >> >>> >>>>>> logger.debug("localhostbecontroller: current layer
> >> >>> >>>>>> list
> >> >>> >>>>>> %s "
> >> >>> >>>>>> % pformat(layerlist))
> >> >>> >>>>>>
> >> >>> >>>>>> diff --git a/
> >> >>> >>>>>>
> >> >>> >>>>>>
> bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >> >>> >>>>>>
> >> >>> >>>>>>
> b/bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >> >>> >>>>>> index 5022b59..a22f744 100644
> >> >>> >>>>>> ---
> >> >>> >>>>>>
> >> >>> >>>>>>
> a/bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >> >>> >>>>>> +++
> >> >>> >>>>>>
> >> >>> >>>>>>
> b/bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >> >>> >>>>>> @@ -45,12 +45,14 @@ class Command(BaseCommand):
> >> >>> >>>>>> for i in ['bitbake', 'releases', 'defaultrelease',
> >> >>> >>>>>> 'config',
> >> >>> >>>>>> 'layersources']:
> >> >>> >>>>>> assert i in data
> >> >>> >>>>>>
> >> >>> >>>>>> - def _read_git_url_from_local_repository(address):
> >> >>> >>>>>> + def _read_git_url_from_local_repository(address,
> path
> >> >>> >>>>>> =
> >> >>> >>>>>> None):
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> If you want to pass in the path, please move the whole
> function
> >> >>> >>>>> outside
> >> >>> >>>>> _import_layer_config, as it's no longer a closure.
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>>
> >> >>> >>>>>> url = None
> >> >>> >>>>>> + if not path:
> >> >>> >>>>>> + path = os.path.dirname(filepath)
> >> >>> >>>>>> # we detect the remote name at runtime
> >> >>> >>>>>> import subprocess
> >> >>> >>>>>> (remote, remote_name) = address.split(":", 1)
> >> >>> >>>>>> - cmd = subprocess.Popen("git remote -v",
> >> >>> >>>>>> shell=True,
> >> >>> >>>>>> cwd =
> >> >>> >>>>>> os.path.dirname(filepath), stdout=subprocess.PIPE, stderr =
> >> >>> >>>>>> subprocess.PIPE)
> >> >>> >>>>>> + cmd = subprocess.Popen("git remote -v",
> >> >>> >>>>>> shell=True,
> >> >>> >>>>>> cwd =
> >> >>> >>>>>> path, stdout=subprocess.PIPE, stderr = subprocess.PIPE)
> >> >>> >>>>>> (out,err) = cmd.communicate()
> >> >>> >>>>>> if cmd.returncode != 0:
> >> >>> >>>>>> logging.warning("Error while importing layer
> >> >>> >>>>>> vcs_url:
> >> >>> >>>>>> git error: %s" % err)
> >> >>> >>>>>> @@ -121,7 +123,11 @@ class Command(BaseCommand):
> >> >>> >>>>>> logger.error("Local layer path %s
> must
> >> >>> >>>>>> exists. Are you trying to import a layer that does not exist
> ?
> >> >>> >>>>>> Check your
> >> >>> >>>>>> local toasterconf.json" % lo.local_path)
> >> >>> >>>>>>
> >> >>> >>>>>> if
> >> >>> >>>>>> layerinfo['vcs_url'].startswith("remote:"):
> >> >>> >>>>>> - lo.vcs_url =
> >> >>> >>>>>> _read_git_url_from_local_repository(layerinfo['vcs_url'])
> >> >>> >>>>>> + if layerinfo['local_path'] not in
> >> >>> >>>>>> ["meta",
> >> >>> >>>>>> "meta-yocto", "meta-yocto-bsp"]:
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> Please don't use hardcoded layer names anywhere in the code.
> >> >>> >>>>>
> >> >>> >>>>> We do not want special handling for some layers, all layers
> need
> >> >>> >>>>> to
> >> >>> >>>>> be
> >> >>> >>>>> treated in the same, uniform, way.
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>> + repo_path =
> >> >>> >>>>>> layerinfo['local_path']
> >> >>> >>>>>> + else:
> >> >>> >>>>>> + repo_path = None
> >> >>> >>>>>> + lo.vcs_url =
> >> >>> >>>>>> _read_git_url_from_local_repository(layerinfo['vcs_url'],
> >> >>> >>>>>> repo_path)
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> I think this code needs
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>>
> >> >>> >>>>>> if lo.vcs_url is None:
> >> >>> >>>>>> logger.error("The toaster config
> >> >>> >>>>>> file
> >> >>> >>>>>> references the local git repo, but Toaster cannot detect
> >> >>> >>>>>> it.\nYour
> >> >>> >>>>>> local
> >> >>> >>>>>> configuration for layer %s is invalid. Make sure that the
> >> >>> >>>>>> toasterconf.json
> >> >>> >>>>>> file is correct." % layerinfo['name'])
> >> >>> >>>>
> >> >>> >>>>
> >> >>> >>>> A bit more explanation would help me move further to improvise
> >> >>> >>>> the
> >> >>> >>>> patch. If you don't mind please? So if I understand correctly a
> >> >>> >>>> separate
> >> >>> >>>> function should be there to handle HEAD branches provided by
> >> >>> >>>> toasterconf.json file, right?
> >> >>> >>>
> >> >>> >>>
> >> >>> >>>
> >> >>> >>> Yep, exactly my point.
> >> >>> >>>
> >> >>> >>> When inserting the Layer_Version objects for the "HEAD" branch,
> >> >>> >>> the
> >> >>> >>> Layer_Version.local_path should
> >> >>> >>>
> >> >>> >>> be set to the layer path.
> >> >>> >>>
> >> >>> >>> When checking out the layers in localhost bbcontroller, the
> >> >>> >>> checkout
> >> >>> >>> should be skipped at all times for "HEAD" branches; instead, the
> >> >>> >>> value in
> >> >>> >>> Layer_Version.local_path should be used.
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >> Is there a way to access local_path of toasterconf.json file from
> >> >>> >> localhostbecontroller.py file?
> >> >>> >
> >> >>> > I got the solution. I have modified local_path from "/" to the
> value
> >> >>> > in
> >> >>> > the
> >> >>> > configuration file in the database.
> >> >>> >
> >> >>> >
> >> >>> >>
> >> >>> >>
> >> >>> >>>
> >> >>> >>>
> >> >>> >>>
> >> >>> >>>>>>
> >> >>> >>>>>>
> >> >>> >>>>>> --
> >> >>> >>>>>> 1.9.1
> >> >>> >>>>>>
> >> >>> >>>>>> --
> >> >>> >>>>>> _______________________________________________
> >> >>> >>>>>> toaster mailing list
> >> >>> >>>>>> toaster at yoctoproject.org
> >> >>> >>>>>> https://lists.yoctoproject.org/listinfo/toaster
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>>
> >> >>> >>>>> --
> >> >>> >>>>> Alex Damian
> >> >>> >>>>> Yocto Project
> >> >>> >>>>> SSG / OTC
> >> >>> >>>>
> >> >>> >>>>
> >> >>> >>>>
> >> >>> >>>>
> >> >>> >>>> --
> >> >>> >>>> സുജിത് ഹരിദാസന്
> >> >>> >>>> Bangalore
> >> >>> >>>> <Project>Contributor to KDE project
> >> >>> >>>> http://fci.wikia.com/wiki/Anti-DRM-Campaign
> >> >>> >>>> <Blog> http://sujithh.info
> >> >>> >>>
> >> >>> >>>
> >> >>> >>>
> >> >>> >>>
> >> >>> >>> --
> >> >>> >>> Alex Damian
> >> >>> >>> Yocto Project
> >> >>> >>> SSG / OTC
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >>
> >> >>> >> --
> >> >>> >> സുജിത് ഹരിദാസന്
> >> >>> >> Bangalore
> >> >>> >> <Project>Contributor to KDE project
> >> >>> >> http://fci.wikia.com/wiki/Anti-DRM-Campaign
> >> >>> >> <Blog> http://sujithh.info
> >> >>> >
> >> >>> >
> >> >>> > --
> >> >>> > _______________________________________________
> >> >>> > toaster mailing list
> >> >>> > toaster at yoctoproject.org
> >> >>> > https://lists.yoctoproject.org/listinfo/toaster
> >> >>> >
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> സുജിത് ഹരിദാസന്
> >> >> Bangalore
> >> >> <Project>Contributor to KDE project
> >> >> http://fci.wikia.com/wiki/Anti-DRM-Campaign
> >> >> <Blog> http://sujithh.info
> >> >
> >> >
> >> >
> >> >
> >> > --
> >> > സുജിത് ഹരിദാസന്
> >> > Bangalore
> >> > <Project>Contributor to KDE project
> >> > http://fci.wikia.com/wiki/Anti-DRM-Campaign
> >> > <Blog> http://sujithh.info
> >
> >
> >
> >
> > --
> > സുജിത് ഹരിദാസന്
> > Bangalore
> > <Project>Contributor to KDE project
> > http://fci.wikia.com/wiki/Anti-DRM-Campaign
> > <Blog> http://sujithh.info
>
--
സുജിത് ഹരിദാസന്
Bangalore
<Project>Contributor to KDE project
http://fci.wikia.com/wiki/Anti-DRM-Campaign
<Blog> http://sujithh.info
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/toaster/attachments/20150902/0f0b5bb3/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: toaster_ui.log.bz2
Type: application/x-bzip2
Size: 349068 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/toaster/attachments/20150902/0f0b5bb3/attachment-0001.bin>
More information about the toaster
mailing list