[Toaster] [review-request][PATCH] toaster: Fix import of custom layers from toasterjson.conf
sujith h
sujith.h at gmail.com
Tue Sep 15 06:50:30 PDT 2015
On Tue, Sep 15, 2015 at 7:05 PM, Barros Pena, Belen <
belen.barros.pena at intel.com> wrote:
>
>
> On 11/09/2015 07:16, "toaster-bounces at yoctoproject.org on behalf of sujith
> h" <toaster-bounces at yoctoproject.org on behalf of sujith.h at gmail.com>
> wrote:
>
> >Hi Brian,
> >
> >
> >I tried building your branch and I am still not able to reproduce the
> >failure. The branch I have used is:
> >poky-contrib/bavery/submit/sujith/20150827_custom_layer_import
>
> Sujith asked me to try and reproduce the problems Brian was seeing with
> his custom toaster configuration. I was able to load Sujith's
> configuration into Toaster without problems, although we discovered that,
> as it was, it required the existence of a poky directory (if I cloned the
> poky repo into directory 'xyz' using 'git clone
> git://git.yoctoproject.org/poky xyz' the builds failed). I believe Sujith
> has a patch to fix that.
>
This is caused by my patch. I will remove "poky", which is hard coded in
the patch. That would fix the cloning of poky into a directory issue.
> After loading the custom configuration into Toaster and cloning the needed
> layers locally I was able to build core-image-sato with the qtbase package
> no problems. The build completed, the rootfs that was created seems fine,
> and the list of packages in the rootfs.manifest file seems correct.
> However, the information about the build collected by Toaster is
> incomplete.
>
> I then reproduced the build getting Toaster to clone the layers instead of
> using local layers in my builds machine: the build completed without
> problems and the information came into Toaster correctly.
>
> So it looks like Sujith's patches might be ok, and what we have is some
> kind of data collection issue whenever you build a local layer that is not
> one of the YP core layers (openembedded-core, meta-yocto and
> meta-yocto-bsp). What I've been able to verify is:
>
> 1. That the information about the additional local layers is not picked up
> by Toaster
> 2. That the list of packages installed is incorrect
>
> I am not sure how we move forward from here, but this is what seems
> logical to me:
>
> * Sujith, I guess we need a new version of your patch with the 'poky'
> hardcoding removed
>
Sure I will create a new version of the patch.
* I guess we need to open an issue in Bugzilla for the local layers data
> collection issue
>
>
Yah that would be better, so that we can track down issue. I assume that
this is found when we load toaster configuration file with already cloned
layer.
Is there anything else that would need to be done?
>
That covered most of our test cases I believe. If at all anything is
missed, we can fix it :)
Thanks,
Sujith H
>
> Thanks!
>
> Belén
>
>
> >
> >Here is th output:
> >
> >sujith at dockers:~/MEL/toaster_test$ ls build/tmp/deploy/images/qemux86/
> -lt
> >total 1308448
> >lrwxrwxrwx 1 sujith sujith 50 Sep 11 00:27
> >core-image-sato-qemux86.ext3 ->
> >core-image-sato-qemux86-20150910101208.rootfs.ext3
> >lrwxrwxrwx 1 sujith sujith 50 Sep 11 00:27
> >core-image-sato-qemux86.ext4 ->
> >core-image-sato-qemux86-20150910101208.rootfs.ext4
> >lrwxrwxrwx 1 sujith sujith 51 Sep 11 00:27
> >core-image-sato-qemux86.jffs2 ->
> >core-image-sato-qemux86-20150910101208.rootfs.jffs2
> >lrwxrwxrwx 1 sujith sujith 54 Sep 11 00:27
> >core-image-sato-qemux86.manifest ->
> >core-image-sato-qemux86-20150910101208.rootfs.manifest
> >lrwxrwxrwx 1 sujith sujith 53 Sep 11 00:27
> >core-image-sato-qemux86.tar.bz2 ->
> >core-image-sato-qemux86-20150910101208.rootfs.tar.bz2
> >-rw-r--r-- 1 sujith sujith 538497024 Sep 11 00:27
> >core-image-sato-qemux86-20150910101208.rootfs.ext3
> >-rw-r--r-- 1 sujith sujith 154014569 Sep 11 00:27
> >core-image-sato-qemux86-20150910101208.rootfs.tar.bz2
> >-rw-r--r-- 1 sujith sujith 538497024 Sep 11 00:26
> >core-image-sato-qemux86-20150910101208.rootfs.ext4
> >-rw-r--r-- 1 sujith sujith 196345856 Sep 11 00:26
> >core-image-sato-qemux86-20150910101208.rootfs.jffs2
> >-rw-r--r-- 1 sujith sujith 21170 Sep 11 00:24
> >core-image-sato-qemux86-20150910101208.rootfs.manifest
> >-rw-r--r-- 2 sujith sujith 294 Sep 11 00:21
> >README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
> >lrwxrwxrwx 1 sujith sujith 71 Sep 10 22:34 bzImage ->
> >bzImage--4.1.2+git0+45393dd54f_4e30e64c44-r0-qemux86-20150910101208.bin
> >lrwxrwxrwx 1 sujith sujith 71 Sep 10 22:34 bzImage-qemux86.bin ->
> >bzImage--4.1.2+git0+45393dd54f_4e30e64c44-r0-qemux86-20150910101208.bin
> >lrwxrwxrwx 1 sujith sujith 71 Sep 10 22:34 modules-qemux86.tgz ->
> >modules--4.1.2+git0+45393dd54f_4e30e64c44-r0-qemux86-20150910101208.tgz
> >-rw-rw-r-- 2 sujith sujith 82529712 Sep 10 22:34
> >modules--4.1.2+git0+45393dd54f_4e30e64c44-r0-qemux86-20150910101208.tgz
> >-rw-r--r-- 2 sujith sujith 6924944 Sep 10 22:34
> >bzImage--4.1.2+git0+45393dd54f_4e30e64c44-r0-qemux86-20150910101208.bin
> >sujith at dockers:~/MEL/toaster_test$
> >
> >Also I have noticed that qtbase got built successfully. And the rootfs
> >has the qtbase installed. In the IMAGE_INSTALL_append I have added only
> >qtbase.
> >
> >
> >The poky is cloned under: /home/sujith/MEL/toaster_test
> >
> >sujith at dockers:~/MEL/toaster_test$ ls -lt
> >total 13744
> >-rw-rw-r-- 1 sujith sujith 5357 Sep 11 11:39 build_config.tar.bz2
> >-rw-r--r-- 1 sujith sujith 14029824 Sep 11 11:25 toaster.sqlite
> >drwxr-xr-x 8 sujith sujith 4096 Sep 11 00:27 build
> >-rw-rw-r-- 1 sujith sujith 282 Sep 10 15:37 toaster_server.log
> >drwxrwxr-x 2 sujith sujith 4096 Sep 10 15:36 toaster_build_artifacts
> >-rw-rw-r-- 1 sujith sujith 4703 Sep 10 15:30 toasterconf.json
> >drwxrwxr-x 6 sujith sujith 4096 Sep 10 15:06 venv
> >drwxrwxr-x 11 sujith sujith 4096 Sep 8 14:35 poky
> >sujith at dockers:~/MEL/toaster_test$
> >
> >
> >And the cloned_layers directory resides in /home/sujith/MEL:
> >sujith at dockers:~/MEL$ ls -lt cloned_layers/
> >total 8
> >drwxrwxr-x 8 sujith sujith 4096 Sep 10 15:04 meta-qt5
> >drwxrwxr-x 19 sujith sujith 4096 Sep 10 15:03 meta-openembedded
> >sujith at dockers:~/MEL$
> >
> >
> >
> >
> >I am also attaching the build config tar ball with the mail.
> >
> >
> >Unfortunately even the size of toaster_ui.log is very less. Attaching
> >that along with the mail.
> >
> >
> >Let me know if you still face the same issue.
> >
> >
> >Thanks,
> >
> >Sujith H
> >
> >
> >On Thu, Sep 10, 2015 at 8:52 PM, sujith h
> ><sujith.h at gmail.com> wrote:
> >
> >Hi Brian,
> >
> >
> >I am testing on your poky-contrib branch ( i.e,
> >bavery/submit/sujith/20150827_custom_layer_import) with core-image-sato
> >and qtbase added in IMAGE_INSTALL_append.The build is still in progress
> >some 39% task completed. So I would be able to deliver the configuration
> > for the same build tomorrow only :( Sorry for the inconvenience.
> >
> >
> >
> >Thanks,
> >
> >Sujith H
> >
> >On Wed, Sep 9, 2015 at 9:16 PM, sujith h
> ><sujith.h at gmail.com> wrote:
> >
> >Hi Brian,
> >
> >
> >I am attaching the tar file which contains the conf folder from the build
> >directory and the toasterconf.json file just outside poky folder.
> >
> >
> >Thanks,
> >
> >Sujith H
> >
> >
> >On Wed, Sep 2, 2015 at 2:26 PM, sujith h
> ><sujith.h at gmail.com> wrote:
> >
> >Hi Brian,
> >
> >
> >Was there an instance of bitbake running in your build folder before you
> >triggered the build from toaster?
> >
> >
> >Thanks,
> >
> >Sujith H
> >
> >
> >
> >On Wed, Sep 2, 2015 at 2:12 PM, sujith h
> ><sujith.h at gmail.com> wrote:
> >
> >
> >
> >On Tue, Sep 1, 2015 at 10:39 PM, Brian Avery
> ><avery.brian at gmail.com> wrote:
> >
> >Hi,
> >
> >I'm on the correct patch afaik. I put the toasterconf.json into the
> >directory above poky and loaded it with:
> >poky/bitbake/lib/toaster/manage.py loadconf
> >/home/bavery/src/intel/myBugs2/sujith/toasterconf.json
> >
> >
> >
> >
> >This is not my latest patch which I worked on :) It was with subject:
> >[PATCH] toaster: Import external layers outside poky from toasterconf.json
> >
> >
> >
> >
> >I also used option 0 so that toaster did not attempt to load the
> >layers from openembedded.
> >
> >My branch for this test is:
> >
> http://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/?h=bavery%2Fsubmit%
> >2Fsujith%2F20150827_custom_layer_import
> >
> >I ran a build of core-image-sato with qtbase and iw set in
> >IMAGE_INSTALL_append for the project.
> >
> >The results:
> >The good-
> >I got a core-image-sato as well as the qt5 and iw packages; so the build
> >worked.
> >
> >The not so good -
> >1) My build progress bar did not update.
> >2) my recipe list after the build looks like:
> >https://www.dropbox.com/s/qs7hulsbmcgg4ik/Screenshot%202015-09-01%2010.02
> .
> >29.png?dl=0
> >3) in the build directory I set when starting up toaster (where the
> >tmp/deploy ends up among other things) the toaster_ui.log file was
> >filled with errors (it ended up being 17G by the end of the build).
> >I'm attaching the first 120 lines of it so you can see what it looked
> >like.
> >
> >
> >
> >I would like to share my poky and cloned_layers directory and the ui log
> >file attached:
> >
> >------------
> >sujith at kdekidd0:~/MEL/test_poky$ pwd
> >/home/sujith/MEL/test_poky
> >sujith at kdekidd0:~/MEL/test_poky$ ls -lt
> >total 16488
> >-rw-r--r-- 1 sujith sujith 16855040 Sep 2 13:46 toaster.sqlite
> >drwxrwxr-x 3 sujith sujith 4096 Sep 2 13:45 toaster_build_artifacts
> >drwxr-xr-x 8 sujith sujith 4096 Sep 2 13:43 build
> >drwxrwxr-x 11 sujith sujith 4096 Sep 2 10:01 poky
> >-rw-rw-r-- 1 sujith sujith 4632 Aug 28 12:21 toasterconf.json
> >drwxrwxr-x 6 sujith sujith 4096 Aug 28 11:53 venv
> >sujith at kdekidd0:~/MEL/test_poky$ ls ../cloned_layers/ -l
> >total 8
> >drwxrwxr-x 19 sujith sujith 4096 Aug 28 11:51 meta-oe
> >drwxrwxr-x 8 sujith sujith 4096 Aug 28 12:10 meta-qt5
> >sujith at kdekidd0:~/MEL/test_poky$
> >------------
> >
> >
> >Now the step done to load configuration:
> >
> >------------
> >sujith at kdekidd0:~/MEL/test_poky$ source venv/bin/activate
> >(venv)sujith at kdekidd0:~/MEL/test_poky$ ./poky/bitbake/bin/toaster
> >Syncing...
> >Creating tables ...
> >Creating table auth_permission
> >Creating table auth_group_permissions
> >Creating table auth_group
> >Creating table auth_user_groups
> >Creating table auth_user_user_permissions
> >Creating table auth_user
> >Creating table django_content_type
> >Creating table django_session
> >Creating table django_admin_log
> >Creating table south_migrationhistory
> >
> >You just installed Django's auth system, which means you don't have any
> >superusers defined.
> >Would you like to create one now? (yes/no): yes
> >Username (leave blank to use 'sujith'):
> >Email address:
> >Password:
> >Password (again):
> >Superuser created successfully.
> >Installing custom SQL ...
> >Installing indexes ...
> >Installed 0 object(s) from 0 fixture(s)
> >
> >Synced:
> > > django.contrib.auth
> > > django.contrib.contenttypes
> > > django.contrib.messages
> > > django.contrib.sessions
> > > django.contrib.admin
> > > django.contrib.staticfiles
> > > django.contrib.humanize
> > > south
> >
> >Not synced (use migrations):
> > - bldcontrol
> > - orm
> >(use ./manage.py migrate to migrate these)
> >Running migrations for orm:
> > - Migrating forwards to 0024_auto__add_field_recipe_is_image.
> > > orm:0001_initial
> > > orm:0002_auto__add_field_build_timespent
> > > orm:0003_timespent
> > - Migration 'orm:0003_timespent' is marked for no-dry-run.
> > > orm:0004_auto__add_field_package_installed_name
> > >
> >orm:0005_auto__add_target_image_file__add_target_file__add_field_variableh
> >istor
> > >
> >orm:0006_auto__add_field_target_image_size__add_field_target_license_manif
> >est_p
> > > orm:0007_auto__add_helptext
> > >
> >orm:0008_auto__chg_field_variablehistory_operation__chg_field_recipe_descr
> >iptio
> > >
> >orm:0009_auto__add_projectvariable__add_projectlayer__add_projecttarget__a
> >dd_pr
> > >
> >orm:0010_auto__add_field_project_branch__add_field_project_short_descripti
> >on__a
> > > orm:0011_auto__add_field_projectlayer_dirpath
> > >
> >orm:0012_auto__add_field_projectlayer_optional__add_field_projecttarget_ta
> >sk
> > >
> >orm:0013_auto__add_release__add_layerversiondependency__add_unique_layerve
> >rsion
> > >
> >orm:0014_auto__chg_field_package_summary__chg_field_layer_summary__chg_fie
> >ld_re
> > >
> >orm:0015_auto__add_field_layer_vcs_web_url__add_field_layer_vcs_web_tree_b
> >ase_u
> > >
> >orm:0016_auto__add_field_release_helptext__chg_field_release_branch__add_i
> >ndex_
> > >
> >orm:0017_auto__del_toastersettingdefaultlayer__add_releaselayersourceprior
> >ity__
> > > orm:0018_auto__add_field_layer_version_project
> > > orm:0019_auto__add_buildartifact
> > >
> >orm:0020_auto__add_field_layer_version_local_path__add_field_recipe_pathfl
> >ags__
> > >
> >orm:0021_auto__chg_field_build_project__chg_field_project_bitbake_version_
> >_chg_
> > >
> >orm:0022_auto__add_field_target_task__add_field_layer_version_local_path__
> >del_f
> > >
> >orm:0023_auto__del_field_build_warnings_no__del_field_build_errors_no__del
> >_fiel
> > > orm:0024_auto__add_field_recipe_is_image
> > - Loading initial data for orm.
> >Installed 0 object(s) from 0 fixture(s)
> >Running migrations for bldcontrol:
> > - Migrating forwards to 0008_brarchive.
> > > bldcontrol:0001_initial
> > >
> >bldcontrol:0002_auto__add_field_buildenvironment_sourcedir__add_field_buil
> >denvironment
> > > bldcontrol:0003_auto__add_field_brlayer_dirpath
> > > bldcontrol:0004_loadinitialdata
> > - Migration 'bldcontrol:0004_loadinitialdata' is marked for no-dry-run.
> > > bldcontrol:0005_auto__add_brerror
> > > bldcontrol:0006_auto__add_brbitbake
> > >
> >bldcontrol:0007_auto__add_field_buildrequest_environment__chg_field_buildr
> >equest_build
> > > bldcontrol:0008_brarchive
> > - Migration 'bldcontrol:0008_brarchive' is marked for no-dry-run.
> > - Loading initial data for bldcontrol.
> >Installed 0 object(s) from 0 fixture(s)
> >Toaster needs to know in which directory it can download build log files
> >and other artifacts.
> > Toaster suggests "/home/sujith/MEL/test_poky/toaster_build_artifacts/".
> > Press Enter to select
> >"/home/sujith/MEL/test_poky/toaster_build_artifacts/" or type the full
> >path to a different directory:
> >
> >Verifying the Build Environment. If the local Build Environment is not
> >properly configured, you will be asked to configure it.
> >
> > -- Validation: The checkout directory must be set.
> >Toaster needs to know in which directory it should check out the layers
> >that will be needed for your builds.
> > Toaster suggests "/home/sujith". If you select this directory, a layer
> >like "meta-intel" will end up in "/home/sujith/meta-intel".
> > Press Enter to select "/home/sujith" or type the full path to a
> >different directory (must be a parent of current checkout directory):
> >
> >Verifying the Build Environment. If the local Build Environment is not
> >properly configured, you will be asked to configure it.
> >
> > -- Validation: The build directory must be set.
> >Toaster needs to know where is your build directory.
> > The build directory is where all the artifacts created by your builds
> >will be stored. Type the full path to the directory (for example: "
> >/home/sujith/build")/home/sujith/MEL/test_poky/build
> >Build configuration saved
> >Verifying the Build Environment. If the local Build Environment is not
> >properly configured, you will be asked to configure it.
> >
> >Toaster can use a SINGLE predefined configuration file to set up default
> >project settings and layer information sources.
> >
> > Toaster will list now the configuration files that it found. Select the
> >number to use the desired configuration file.
> > [1] -
> >/home/sujith/MEL/toaster_work/poky/meta-yocto/conf/toasterconf.json
> > [2] - /home/sujith/MEL/cedar/poky/meta-yocto/conf/toasterconf.json
> > [3] -
> >/home/sujith/MEL/toaster_MEL_final/poky/meta-yocto/conf/toasterconf.json
> > [4] - /home/sujith/MEL/test_poky/poky/meta-yocto/conf/toasterconf.json
> > [5] -
> >/home/sujith/MEL/upstream_poky_work/poky-contrib/meta-yocto/conf/toasterco
> >nf.json
> > [6] - /home/sujith/gitroot/poky/meta-yocto/conf/toasterconf.json
> >
> > [0] - Exit without importing any file
> >
> > Enter your option: 0
> >Starting webserver...
> >Webserver address: http://0.0.0.0:8000/
> >Starting browser...
> >Toaster is now running. You can stop it with Ctrl-C
> >^Z
> >[1]+ Stopped ./poky/bitbake/bin/toaster
> >(venv)sujith at kdekidd0:~/MEL/test_poky$
> >./poky/bitbake/lib/toaster/manage.py loadconf toasterconf.json
> >
> >(venv)sujith at kdekidd0:~/MEL/test_poky$ fg
> >./poky/bitbake/bin/toaster
> >2015-09-02 10:11:54,415 DEBUG localhostbecontroller, our git repos are
> >{(u'', u'HEAD'): [('bitbake', u'bitbake')],
> > (u'git://git.yoctoproject.org/poky <http://git.yoctoproject.org/poky>',
> >u'HEAD'): [(u'openembedded-core',
> > u'meta'),
> > (u'meta-yocto',
> > u'meta-yocto'),
> > (u'meta-yocto-bsp',
> > u'meta-yocto-bsp')],
> > (u'git://github.com/meta-qt5/meta-qt5.git
> ><http://github.com/meta-qt5/meta-qt5.git>', u'HEAD'): [(u'meta-qt5',
> > u'meta-qt5')],
> > (u'git://github.com/openembedded/meta-oe.git
> ><http://github.com/openembedded/meta-oe.git>', u'HEAD'):
> [(u'meta-python',
> >
> >u'meta-python'),
> >
> >(u'meta-multimedia',
> >
> >u'meta-multimedia'),
> >
> >(u'meta-filesystems',
> >
> >u'meta-filesystems'),
> >
> >(u'meta-networking',
> >
> >u'meta-networking'),
> > (u'meta-oe',
> > u'meta-oe')]}
> >2015-09-02 10:11:54,416 DEBUG lbc_shellcmmd: (/home/sujith/Documents) git
> >remote -v
> >2015-09-02 10:11:54,419 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,419 DEBUG lbc_shellcmmd: (/home/sujith/.thumbnails)
> >git remote -v
> >2015-09-02 10:11:54,422 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,422 DEBUG lbc_shellcmmd: (/home/sujith/.emacs.d) git
> >remote -v
> >2015-09-02 10:11:54,425 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,425 DEBUG lbc_shellcmmd: (/home/sujith/Templates) git
> >remote -v
> >2015-09-02 10:11:54,429 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,429 DEBUG lbc_shellcmmd: (/home/sujith/.pylint.d) git
> >remote -v
> >2015-09-02 10:11:54,432 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,432 DEBUG lbc_shellcmmd: (/home/sujith/.cscache) git
> >remote -v
> >2015-09-02 10:11:54,439 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,439 DEBUG lbc_shellcmmd: (/home/sujith/.config) git
> >remote -v
> >2015-09-02 10:11:54,443 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,443 DEBUG lbc_shellcmmd: (/home/sujith/bin) git
> >remote -v
> >2015-09-02 10:11:54,448 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,448 DEBUG lbc_shellcmmd: (/home/sujith/MEL) git
> >remote -v
> >2015-09-02 10:11:54,452 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,452 DEBUG lbc_shellcmmd: (/home/sujith/Pictures) git
> >remote -v
> >2015-09-02 10:11:54,455 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,455 DEBUG lbc_shellcmmd: (/home/sujith/.pip) git
> >remote -v
> >2015-09-02 10:11:54,459 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,459 DEBUG lbc_shellcmmd: (/home/sujith/Music) git
> >remote -v
> >2015-09-02 10:11:54,463 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,463 DEBUG lbc_shellcmmd: (/home/sujith/debian) git
> >remote -v
> >2015-09-02 10:11:54,466 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,466 DEBUG lbc_shellcmmd: (/home/sujith/.distlib) git
> >remote -v
> >2015-09-02 10:11:54,470 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,470 DEBUG lbc_shellcmmd: (/home/sujith/.mozilla) git
> >remote -v
> >2015-09-02 10:11:54,473 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,474 DEBUG lbc_shellcmmd: (/home/sujith/Django_study)
> >git remote -v
> >2015-09-02 10:11:54,478 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,478 DEBUG lbc_shellcmmd: (/home/sujith/.java) git
> >remote -v
> >2015-09-02 10:11:54,481 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,482 DEBUG lbc_shellcmmd:
> >(/home/sujith/patches_to_push) git remote -v
> >2015-09-02 10:11:54,485 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,485 DEBUG lbc_shellcmmd: (/home/sujith/.ssh) git
> >remote -v
> >2015-09-02 10:11:54,488 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,488 DEBUG lbc_shellcmmd: (/home/sujith/Downloads) git
> >remote -v
> >2015-09-02 10:11:54,492 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,492 DEBUG lbc_shellcmmd: (/home/sujith/.pki) git
> >remote -v
> >2015-09-02 10:11:54,495 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,496 DEBUG lbc_shellcmmd: (/home/sujith/Public) git
> >remote -v
> >2015-09-02 10:11:54,499 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,499 DEBUG lbc_shellcmmd: (/home/sujith/.repoconfig)
> >git remote -v
> >2015-09-02 10:11:54,502 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,502 DEBUG lbc_shellcmmd: (/home/sujith/.pc) git
> >remote -v
> >2015-09-02 10:11:54,505 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,505 DEBUG lbc_shellcmmd: (/home/sujith/wsgiref) git
> >remote -v
> >2015-09-02 10:11:54,510 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,510 DEBUG lbc_shellcmmd: (/home/sujith/.mentor) git
> >remote -v
> >2015-09-02 10:11:54,513 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,515 DEBUG lbc_shellcmmd:
> >(/home/sujith/MENTOR_TOOLCHAIN) git remote -v
> >2015-09-02 10:11:54,517 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,518 DEBUG lbc_shellcmmd: (/home/sujith/Desktop) git
> >remote -v
> >2015-09-02 10:11:54,521 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,521 DEBUG lbc_shellcmmd: (/home/sujith/.local) git
> >remote -v
> >2015-09-02 10:11:54,525 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,525 DEBUG lbc_shellcmmd: (/home/sujith/.dbus) git
> >remote -v
> >2015-09-02 10:11:54,529 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,529 DEBUG lbc_shellcmmd: (/home/sujith/workspace) git
> >remote -v
> >2015-09-02 10:11:54,532 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,533 DEBUG lbc_shellcmmd:
> >(/home/sujith/.gstreamer-0.10) git remote -v
> >2015-09-02 10:11:54,536 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,536 DEBUG lbc_shellcmmd: (/home/sujith/.gnome) git
> >remote -v
> >2015-09-02 10:11:54,540 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,540 DEBUG lbc_shellcmmd: (/home/sujith/.cache) git
> >remote -v
> >2015-09-02 10:11:54,544 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,544 DEBUG lbc_shellcmmd:
> >(/home/sujith/codebench-linux-install-2014.11-96-arm) git remote -v
> >2015-09-02 10:11:54,547 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,547 DEBUG lbc_shellcmmd: (/home/sujith/Videos) git
> >remote -v
> >2015-09-02 10:11:54,550 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,550 DEBUG lbc_shellcmmd: (/home/sujith/.gconf) git
> >remote -v
> >2015-09-02 10:11:54,554 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,555 DEBUG lbc_shellcmmd: (/home/sujith/.subversion)
> >git remote -v
> >2015-09-02 10:11:54,558 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,558 DEBUG lbc_shellcmmd: (/home/sujith/.thunderbird)
> >git remote -v
> >2015-09-02 10:11:54,561 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,561 DEBUG lbc_shellcmmd: (/home/sujith/gitroot) git
> >remote -v
> >2015-09-02 10:11:54,564 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,564 DEBUG lbc_shellcmmd: (/home/sujith/.oe) git
> >remote -v
> >2015-09-02 10:11:54,568 WARNING localhostbecontroller: shellcmd error
> >command: git remote -v
> >
> >fatal: Not a git repository (or any of the parent directories): .git
> >
> >2015-09-02 10:11:54,570 DEBUG localhostbecontroller: current layer list
> >[u'/home/sujith/MEL/test_poky/poky/meta',
> > u'/home/sujith/MEL/test_poky/poky/meta-yocto',
> > u'/home/sujith/MEL/test_poky/poky/meta-yocto-bsp',
> > u'/home/sujith/MEL/cloned_layers/meta-oe/meta-python',
> > u'/home/sujith/MEL/cloned_layers/meta-oe/meta-multimedia',
> > u'/home/sujith/MEL/cloned_layers/meta-oe/meta-filesystems',
> > u'/home/sujith/MEL/cloned_layers/meta-oe/meta-networking',
> > u'/home/sujith/MEL/cloned_layers/meta-oe/meta-oe',
> > u'/home/sujith/MEL/cloned_layers/meta-qt5']
> >2015-09-02 10:11:54,571 DEBUG lbc_shellcmmd: (/home/sujith) bash -c
> >"source /home/sujith/MEL/test_poky/poky/oe-init-build-env
> >/home/sujith/MEL/test_poky/build"
> >2015-09-02 10:11:54,684 DEBUG localhostbecontroller: shellcmd success
> >2015-09-02 10:11:54,691 DEBUG localhostbecontroller: running the listener
> >at /home/sujith/MEL/test_poky/poky/bitbake/bin/bitbake
> >2015-09-02 10:11:54,691 DEBUG localhostbecontroller: starting builder
> >bash -c "source /home/sujith/MEL/test_poky/poky/oe-init-build-env
> >/home/sujith/MEL/test_poky/build 2>&1 >toaster_server.log && bitbake
> >--read /home/sujith/MEL/test_poky/build/conf/toaster-pre.conf --postread
> >/home/sujith/MEL/test_poky/build/conf/toaster.conf
> > --server-only -t xmlrpc -B 0.0.0.0:0 <http://0.0.0.0:0> 2>&1
> >>>toaster_server.log "
> >
> >2015-09-02 10:11:54,691 DEBUG lbc_shellcmmd: (/home/sujith) bash -c
> >"source /home/sujith/MEL/test_poky/poky/oe-init-build-env
> >/home/sujith/MEL/test_poky/build 2>&1 >toaster_server.log && bitbake
> >--read /home/sujith/MEL/test_poky/build/conf/toaster-pre.conf
> > --postread /home/sujith/MEL/test_poky/build/conf/toaster.conf
> >--server-only -t xmlrpc -B
> >0.0.0.0:0 <http://0.0.0.0:0> 2>&1 >>toaster_server.log "
> >2015-09-02 10:11:56,198 DEBUG localhostbecontroller: shellcmd success
> >2015-09-02 10:11:56,199 DEBUG localhostbecontroller: Found bitbake server
> >port 33000
> >
> >2015-09-02 10:11:56,200 DEBUG localhostbecontroller: Waiting bitbake
> >server to start
> >2015-09-02 10:11:56,701 DEBUG localhostbecontroller: Waiting bitbake
> >server to start
> >2015-09-02 10:11:57,202 DEBUG localhostbecontroller: Waiting bitbake
> >server to start
> >2015-09-02 10:11:57,704 DEBUG localhostbecontroller: Waiting bitbake
> >server to start
> >2015-09-02 10:11:58,205 DEBUG localhostbecontroller: Started bitbake
> >server
> >2015-09-02 10:11:58,236 DEBUG localhostbecontroller: Build launched,
> >exiting. Follow build logs at
> >/home/sujith/MEL/test_poky/build/toaster_ui.log
> >------------
> >
> >
> >
> >The path to tmp/deploy/image and the content inside the directory:
> >
> >------------
> >sujith at kdekidd0:~/MEL/test_poky/build$ ls tmp/deploy/images/qemux86/ -lt
> >total 1244112
> >lrwxrwxrwx 1 sujith sujith 53 Sep 2 13:43
> >core-image-sato-qemux86.tar.bz2 ->
> >core-image-sato-qemux86-20150902044346.rootfs.tar.bz2
> >lrwxrwxrwx 1 sujith sujith 50 Sep 2 13:43
> >core-image-sato-qemux86.ext3 ->
> >core-image-sato-qemux86-20150902044346.rootfs.ext3
> >lrwxrwxrwx 1 sujith sujith 50 Sep 2 13:43
> >core-image-sato-qemux86.ext4 ->
> >core-image-sato-qemux86-20150902044346.rootfs.ext4
> >lrwxrwxrwx 1 sujith sujith 54 Sep 2 13:43
> >core-image-sato-qemux86.manifest ->
> >core-image-sato-qemux86-20150902044346.rootfs.manifest
> >lrwxrwxrwx 1 sujith sujith 51 Sep 2 13:43
> >core-image-sato-qemux86.jffs2 ->
> >core-image-sato-qemux86-20150902044346.rootfs.jffs2
> >-rw-r--r-- 1 sujith sujith 196083712 Sep 2 13:43
> >core-image-sato-qemux86-20150902044346.rootfs.jffs2
> >-rw-r--r-- 1 sujith sujith 535930880 Sep 2 13:42
> >core-image-sato-qemux86-20150902044346.rootfs.ext4
> >-rw-r--r-- 1 sujith sujith 535930880 Sep 2 13:42
> >core-image-sato-qemux86-20150902044346.rootfs.ext3
> >-rw-r--r-- 1 sujith sujith 154285168 Sep 2 13:42
> >core-image-sato-qemux86-20150902044346.rootfs.tar.bz2
> >-rw-r--r-- 1 sujith sujith 21112 Sep 2 13:41
> >core-image-sato-qemux86-20150902044346.rootfs.manifest
> >-rw-r--r-- 2 sujith sujith 294 Sep 2 13:40
> >README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
> >lrwxrwxrwx 1 sujith sujith 71 Sep 2 12:53 bzImage ->
> >bzImage--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.bin
> >lrwxrwxrwx 1 sujith sujith 71 Sep 2 12:53 bzImage-qemux86.bin ->
> >bzImage--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.bin
> >lrwxrwxrwx 1 sujith sujith 71 Sep 2 12:53 modules-qemux86.tgz ->
> >modules--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.tgz
> >-rw-rw-r-- 2 sujith sujith 83308568 Sep 2 12:53
> >modules--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.tgz
> >-rw-r--r-- 2 sujith sujith 6957488 Sep 2 12:53
> >bzImage--4.1.6+git0+429f9e2ff0_59b8c4f5e8-r0-qemux86-20150902044346.bin
> >sujith at kdekidd0:~/MEL/test_poky/build$
> >------------
> >
> >
> >The screenshot of image built successfully:
> >http://i.imgur.com/V3qtXFh.png <http://i.imgur.com/V3qtXFh.png>
> >
> >
> >---
> >So, you may want to look at/try my poky-contrib branch and look
> >closely at my toasterconf.json file to see if you can tell why you do
> >not see these issues.
> >
> >
> >
> >
> > The toaster-pre.conf of mine looks as:
> >sujith at kdekidd0:~/MEL/test_poky/build/conf$ cat toaster-pre.conf
> >IMAGE_INSTALL_append=" qtbase iw"
> >PACKAGE_CLASSES="package_ipk"
> >MACHINE="qemux86"
> >SDKMACHINE="x86_64"
> >DISTRO="poky"
> >IMAGE_FSTYPES="ext3 jffs2 tar.bz2"
> >TOASTER_BRBE="1:1"
> >sujith at kdekidd0:~/MEL/test_poky/build/conf$
> >
> >
> >Somehow I am not able to figure out what is going on wrong at your end :(
> >
> >
> >
> >-brian
> >
> >On Sun, Aug 30, 2015 at 11:47 PM, sujith h <sujith.h at gmail.com> wrote:
> >> Hi Brian,
> >>
> >> On Sat, Aug 29, 2015 at 1:13 AM, Brian Avery <avery.brian at gmail.com>
> >>wrote:
> >>>
> >>> Hi Sujith,
> >>>
> >>> The new toasterconf does make it easier to test, thanks! I've
> >>> attached mine so you can see what I did in case that caused any of the
> >>> issues below.
> >>> I changed:
> >>> 1) directory paths
> >>> 2) you had "branches": ["mel", "yocto", "HEAD"], which i
> >>> changed to "branches": ["HEAD", "master", "fido",
> >>> "dizzy"],
> >>>
> >>>
> >>>
> >>> So here is my directory layout
> >>>
> >>> /big/src/intel/myBugs2
> >>> cloned_layers/
> >>> meta-oe/
> >>> meta-qt5/
> >>> sujith/
> >>> poky
> >>
> >>
> >> Here is my directory layout:
> >> /home/sujith/MEL/test_poky
> >> poky
> >> /home/sujith/MEL/cloned_layers
> >> meta-oe
> >> meta-qt5
> >>
> >>>
> >>>
> >>> I put the attached toasterconf.json into the sujith/meta-yocto/conf/
> >>> directory (overwriting the default one) and toaster found it on
> >>> startup.
> >>
> >>
> >> I have added my configuration into:
> >> /home/sujith/MEL/test_poky/toasterconf.json
> >>
> >> I never tried over writing toasterconf.json file in meta-yocto/conf
> >>
> >> I use option [0] while running poky/bitbake/bin/toaster i.e, exit
> >>without
> >> importing any layers. Then I manually try to import it using command:
> >> poky/bitbake/lib/toaster/manage.py loadconf toasterconf.json
> >>
> >>> Question:
> >>> Where are you putting your toasterconf.json file? I haven't gone
> >>> through the search logic yet but toaster seemed to have trouble
> >>> finding it in other directories.
> >>>
> >>> My directory settings for starting toaster are:
> >>> build log -> /home/bavery/toaster_build_artifacts
> >>> layer checkout -> /big/src/intel/myBugs2/sujith/
> >>> build -> /home/bavery/toaster_build_artifacts
> >>>
> >>>
> >>> I found the following issues:
> >>> 1)On startup toaster complained about not being able to load from
> >>> openembedded.layers.org <http://openembedded.layers.org> and once
> >>>toaster was up, there were no layers
> >>> available except the local ones.
> >>>
> >>>
> >>>(https://www.dropbox.com/s/jdkayha71l8i9fe/Screenshot%202015-08-28%2012
> .
> >>>29.06.png?dl=0)
> >>> 2) I started a build of core-image-sato with MAGE_INSTALL_append =
> >>> "qt5 iws"
> >>>
> >>>(https://www.dropbox.com/s/m3l6uyxq6ptr5vv/Screenshot%202015-08-28%2012
> .
> >>>32.16.png?dl=0)
> >>> and the build no longer shows progress on the progress bar. top
> >>> running shows that I am well into the build but that is not reflected
> >>> in the UI
> >>>
> >>>(https://www.dropbox.com/s/x3cl2whp2twt8xm/Screenshot%202015-08-28%2012
> .
> >>>32.44.png?dl=0)
> >>> 3) the toaster_ui.log in the build directory is huge and is filled
> >>> with things like :Cannot determine the vcs_reference for layer version
> >>> {'build_id': 1, '_layer_cache': <Layer: __FIXME__unidentified_layer /
> >>> None >, 'layer_id': 204, '_state': <django.db.models.base.ModelSt...."
> >>>
> >>>
> >>>
> >>> Do you see any of these?
> >>
> >>
> >> Since I haven't tried overwriting toasters default configuration file, I
> >> couldn't hit with any of these errors. Would you mind to try with my
> >>way, if
> >> you don't mind?
> >> Let me know if you face any issue with the procedure I followed.
> >>
> >>
> >> Thanks,
> >> Sujith H
> >>>
> >>>
> >>> -b
> >>>
> >>> On Fri, Aug 28, 2015 at 12:06 AM, sujith h <sujith.h at gmail.com> wrote:
> >>> >
> >>> >
> >>> > On Thu, Aug 27, 2015 at 9:56 PM, sujith h <sujith.h at gmail.com>
> wrote:
> >>> >>
> >>> >>
> >>> >>
> >>> >> On Thu, Aug 27, 2015 at 9:36 PM, Brian Avery <avery.brian at gmail.com
> >
> >>> >> wrote:
> >>> >>>
> >>> >>> Hi Sujith,
> >>> >>>
> >>> >>> I'd like to test this out. Is it possible to get a config file
> >>>that
> >>> >>> exercises the new features?
> >>> >>
> >>> >>
> >>> >> I have attached the toaster configuration file which I used for
> >>> >> testing.
> >>> >> What you can also do is remove meta-mentor,meta-sourcery and
> >>>meta-mx6q
> >>> >> layers from the
> >>> >> configuration file. And try with the layers we have. That might help
> >>> >> you
> >>> >> in testing. Also you
> >>> >> may have to remove some additional settings I have used in the
> >>> >> configuration, like Distro as "mel",
> >>> >> toolchain path etc
> >>> >>
> >>> >> Or the simplest testing would be by adding poky and meta-oe layer.
> >>>Then
> >>> >> try to build
> >>> >> some recipe from meta-oe. That would be the simplest test.
> >>> >>
> >>> >> Let me know if you need more information or face any issues. I would
> >>> >> help
> >>> >> you with that.
> >>> >
> >>> >
> >>> > Hi Brian,
> >>> >
> >>> > I have attached a new configuration file which I am testing right
> >>>away.
> >>> > The
> >>> > build is in progress.
> >>> > In the IMAGE_INSTALL_append ( from UI ), I have added qtbase and iw
> >>> > packages. The 2 repos I have
> >>> > cloned is:
> >>> > git clone git://github.com/meta-qt5/meta-qt5.git
> >>><http://github.com/meta-qt5/meta-qt5.git>
> >>> > and
> >>> > git clone git://github.com/openembedded/meta-oe.git
> >>><http://github.com/openembedded/meta-oe.git>
> >>> >
> >>> > Accordingly adjust your paths mentioned in the configuration file.
> >>> >
> >>> > I hope this configuration file should help you proceed with your
> >>>test.
> >>> > Let
> >>> > me know if you face any issues.
> >>> >
> >>> > Thanks,
> >>> > Sujith H
> >>> >>
> >>> >>
> >>> >> Thanks,
> >>> >> Sujith H
> >>> >>>
> >>> >>>
> >>> >>> -b
> >>> >>>
> >>> >>>
> >>> >>> On Mon, Aug 24, 2015 at 7:16 PM, sujith h <sujith.h at gmail.com>
> >>>wrote:
> >>> >>> > On 24 Aug 2015 6:49 pm, "sujith h" <sujith.h at gmail.com> wrote:
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >> On Fri, Aug 21, 2015 at 8:07 PM, Damian, Alexandru
> >>> >>> >> <alexandru.damian at intel.com> wrote:
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>> On Fri, Aug 21, 2015 at 1:52 PM, sujith h <sujith.h at gmail.com>
> >>> >>> >>> wrote:
> >>> >>> >>>>
> >>> >>> >>>>
> >>> >>> >>>>
> >>> >>> >>>> On Fri, Aug 21, 2015 at 4:45 PM, Damian, Alexandru
> >>> >>> >>>> <alexandru.damian at intel.com> wrote:
> >>> >>> >>>>>
> >>> >>> >>>>> Hi,
> >>> >>> >>>>>
> >>> >>> >>>>> I think we need a better patch description. If I understand
> >>> >>> >>>>> correctly,
> >>> >>> >>>>> the issue you were facing is:
> >>> >>> >>>>> - even if we have layers at HEAD that are not under the poky/
> >>> >>> >>>>> tree,
> >>> >>> >>>>> the
> >>> >>> >>>>> code would always return the
> >>> >>> >>>>> checkout path in the poky/ tree; I recognize that this is a
> >>> >>> >>>>> valid
> >>> >>> >>>>> issue.
> >>> >>> >>>>>
> >>> >>> >>>>> I feel that this issue can be handled a bit differently if we
> >>> >>> >>>>> frame
> >>> >>> >>>>> it
> >>> >>> >>>>> as such:
> >>> >>> >>>>> - if we have a HEAD branch specified for a layer, we need to
> >>> >>> >>>>> find
> >>> >>> >>>>> out
> >>> >>> >>>>> the current checkout directory for that layer, since no
> >>>checkout
> >>> >>> >>>>> would be
> >>> >>> >>>>> performed.
> >>> >>> >>>>>
> >>> >>> >>>>> As such, when we import a toasterconf.json file (they only
> >>>way
> >>> >>> >>>>> to
> >>> >>> >>>>> get
> >>> >>> >>>>> HEAD branches for a layer) we need to store the actual layer
> >>> >>> >>>>> checkout path
> >>> >>> >>>>> in the database (in the localpath, perhaps?), and reuse that
> >>> >>> >>>>> value,
> >>> >>> >>>>> instead
> >>> >>> >>>>> of employing special logic to search for it. What I mean, the
> >>> >>> >>>>> core
> >>> >>> >>>>> of the
> >>> >>> >>>>> problem is solved by replacing the whole gitrepos checkout
> >>>logic
> >>> >>> >>>>> with a
> >>> >>> >>>>> database value for all "HEAD" layers, and eliminate the
> >>>magic in
> >>> >>> >>>>> getGitCloneDirectory().
> >>> >>> >>>>>
> >>> >>> >>>>> I have a couple more comments on the patch below.
> >>> >>> >>>>>
> >>> >>> >>>>> Cheers,
> >>> >>> >>>>> Alex
> >>> >>> >>>>>
> >>> >>> >>>>> On Fri, Aug 21, 2015 at 9:41 AM, Sujith H
> >>><sujith.h at gmail.com>
> >>> >>> >>>>> wrote:
> >>> >>> >>>>>>
> >>> >>> >>>>>> This patch fixes import of custom layers from
> >>>toasterjson.conf
> >>> >>> >>>>>> file. For example it was verified using layers like
> >>> >>> >>>>>> meta-mentor,
> >>> >>> >>>>>> meta-fsl-arm, meta-sourcery etc.
> >>> >>> >>>>>>
> >>> >>> >>>>>> Signed-off-by: Sujith Haridasan
> >>><Sujith_Haridasan at mentor.com>
> >>> >>> >>>>>> ---
> >>> >>> >>>>>> .../toaster/bldcontrol/localhostbecontroller.py | 49
> >>> >>> >>>>>> ++++++++++++++++++++--
> >>> >>> >>>>>> .../bldcontrol/management/commands/loadconf.py | 12
> >>>++++--
> >>> >>> >>>>>> 2 files changed, 54 insertions(+), 7 deletions(-)
> >>> >>> >>>>>>
> >>> >>> >>>>>> diff --git
> >>> >>> >>>>>> a/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >>> >>> >>>>>> b/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >>> >>> >>>>>> index 231a7d3..c43f33f 100644
> >>> >>> >>>>>> ---
> >>>a/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >>> >>> >>>>>> +++
> >>>b/bitbake/lib/toaster/bldcontrol/localhostbecontroller.py
> >>> >>> >>>>>> @@ -178,7 +178,7 @@ class
> >>> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >>> >>> >>>>>> self.be.save()
> >>> >>> >>>>>> logger.debug("localhostbecontroller: Stopped
> >>>bitbake
> >>> >>> >>>>>> server")
> >>> >>> >>>>>>
> >>> >>> >>>>>> - def getGitCloneDirectory(self, url, branch):
> >>> >>> >>>>>> + def
> >>> >>> >>>>>>
> >>> >>> >>>>>> getGitCloneDirectory(self, url, branch, cached_layers=None):
> >>> >>> >>>>>> """ Utility that returns the last component of a
> >>>git
> >>> >>> >>>>>> path
> >>> >>> >>>>>> as
> >>> >>> >>>>>> directory
> >>> >>> >>>>>> """
> >>> >>> >>>>>> import re
> >>> >>> >>>>>> @@ -191,6 +191,17 @@ class
> >>> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >>> >>> >>>>>>
> >>> >>> >>>>>> # word of attention; this is a localhost-specific
> >>> >>> >>>>>> issue;
> >>> >>> >>>>>> only
> >>> >>> >>>>>> on the localhost we expect to have "HEAD" releases
> >>> >>> >>>>>> # which _ALWAYS_ means the current poky checkout
> >>> >>> >>>>>> + if cached_layers:
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> Using cached_layers here works only by coincidence - if the
> >>> >>> >>>>> desired
> >>> >>> >>>>> layer is not manually checked out under be.sourcedir, it will
> >>> >>> >>>>> not
> >>> >>> >>>>> be found
> >>> >>> >>>>> by cached_layers code, and will not appear here.
> >>> >>> >>>>
> >>> >>> >>>>
> >>> >>> >>>> Ah, so would it be good to read from the database? Because I
> >>>was
> >>> >>> >>>> giving
> >>> >>> >>>> full path of layers in the toasterconf.json file. I assume
> >>>that
> >>> >>> >>>> layer
> >>> >>> >>>> information from the toasterconf.json file would be updated in
> >>> >>> >>>> the
> >>> >>> >>>> database?
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>> Would be inserted into the database as the file is read.
> >>> >>> >>>
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> I think a completely new piece of code is needed, which will
> >>> >>> >>>>> track
> >>> >>> >>>>> where any layer that has a HEAD branch is actually checked
> >>>out.
> >>> >>> >>>>> This path
> >>> >>> >>>>> would be discovered and stored by importing a
> >>>toasterconf.json
> >>> >>> >>>>> file
> >>> >>> >>>>> (the
> >>> >>> >>>>> only place that can generate a HEAD branch), and verified to
> >>> >>> >>>>> actually exist
> >>> >>> >>>>> at build time in this function, getGitCloneDirectory(). This
> >>> >>> >>>>> patch
> >>> >>> >>>>> touches
> >>> >>> >>>>> loadconf, but I think we might be able to get a better
> >>>handling
> >>> >>> >>>>> of
> >>> >>> >>>>> that.
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>> + if not url.endswith('.git'):
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> I am not sure why the actual GIT url format is relevant for
> >>> >>> >>>>> "HEAD"
> >>> >>> >>>>> branches; we don't need to figure out where the layer would
> >>>get
> >>> >>> >>>>> checked out,
> >>> >>> >>>>> but where it actually exists.
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>> + from os.path import dirname
> >>> >>> >>>>>> + extractDir = dirname(url)
> >>> >>> >>>>>> + for key, val in cached_layers.iteritems():
> >>> >>> >>>>>> + if val == extractDir:
> >>> >>> >>>>>> + local_checkout_path = key
> >>> >>> >>>>>> + return cached_layers[local_checkout_path]
> >>> >>> >>>>>> + else:
> >>> >>> >>>>>> + local_checkout_path = cached_layers[url]
> >>> >>> >>>>>> + return local_checkout_path
> >>> >>> >>>>>> from os.path import dirname as DN
> >>> >>> >>>>>> local_checkout_path =
> >>> >>> >>>>>> DN(DN(DN(DN(DN(os.path.abspath(__file__))))))
> >>> >>> >>>>>> #logger.debug("localhostbecontroller: using HEAD
> >>> >>> >>>>>> checkout
> >>> >>> >>>>>> in
> >>> >>> >>>>>> %s" % local_checkout_path)
> >>> >>> >>>>>> @@ -245,7 +256,14 @@ class
> >>> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >>> >>> >>>>>>
> >>> >>> >>>>>> # 3. checkout the repositories
> >>> >>> >>>>>> for giturl, commit in gitrepos.keys():
> >>> >>> >>>>>> - localdirname = os.path.join(self.be.sourcedir,
> >>> >>> >>>>>> self.getGitCloneDirectory(giturl, commit))
> >>> >>> >>>>>> + if not giturl.endswith('.git'):
> >>> >>> >>>>>> + for key, val in cached_layers.iteritems():
> >>> >>> >>>>>> + if os.path.dirname(giturl) == val:
> >>> >>> >>>>>> + tmpKey = key
> >>> >>> >>>>>> + tmpVal = gitrepos[(giturl, commit)]
> >>> >>> >>>>>> + gitrepos[(tmpKey, commit)] += tmpVal
> >>> >>> >>>>>> + giturl = tmpKey
> >>> >>> >>>>>> + localdirname = os.path.join(self.be.sourcedir,
> >>> >>> >>>>>> self.getGitCloneDirectory(giturl, commit, cached_layers))
> >>> >>> >>>>>> logger.debug("localhostbecontroller: giturl
> >>>%s:%s
> >>> >>> >>>>>> checking out in current directory %s" % (giturl, commit,
> >>> >>> >>>>>> localdirname))
> >>> >>> >>>>>>
> >>> >>> >>>>>> # make sure our directory is a git repository
> >>> >>> >>>>>> @@ -280,13 +298,36 @@ class
> >>> >>> >>>>>> LocalhostBEController(BuildEnvironmentController):
> >>> >>> >>>>>>
> >>> >>> >>>>>> # verify our repositories
> >>> >>> >>>>>> for name, dirpath in gitrepos[(giturl,
> >>>commit)]:
> >>> >>> >>>>>> - localdirpath = os.path.join(localdirname,
> >>> >>> >>>>>> dirpath)
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> I am not sure what this change tries to do; dirpath is
> >>>actually
> >>> >>> >>>>> a
> >>> >>> >>>>> path
> >>> >>> >>>>> in the git repo where the layer lives; it is not immediate
> >>>that
> >>> >>> >>>>> the
> >>> >>> >>>>> all the
> >>> >>> >>>>> layers live in the top directory of a git repo. This change
> >>> >>> >>>>> invalidates the
> >>> >>> >>>>> check below, where we verify that the layer path actually
> >>>exists
> >>> >>> >>>>> after
> >>> >>> >>>>> checkout.
> >>> >>> >>>>>
> >>> >>> >>>>>>
> >>> >>> >>>>>> + localdirpath = localdirname
> >>> >>> >>>>>>
> >>> >>> >>>>>> logger.debug("localhostbecontroller:
> >>> >>> >>>>>> localdirpath
> >>> >>> >>>>>> expected '%s'" % localdirpath)
> >>> >>> >>>>>> if not os.path.exists(localdirpath):
> >>> >>> >>>>>> raise BuildSetupException("Cannot find
> >>> >>> >>>>>> layer
> >>> >>> >>>>>> git
> >>> >>> >>>>>> path '%s' in checked out repository '%s:%s'. Aborting." %
> >>> >>> >>>>>> (localdirpath,
> >>> >>> >>>>>> giturl, commit))
> >>> >>> >>>>>>
> >>> >>> >>>>>> + layerlisturl, layerlistdir = "", ""
> >>> >>> >>>>>> + layerlisturl = [localurl for localurl,
> >>> >>> >>>>>> localpath
> >>> >>> >>>>>> in
> >>> >>> >>>>>> cached_layers.iteritems() if localpath == localdirpath]
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> I suspect this logic will go away if we're not going to use
> >>> >>> >>>>> cached_layers to discover the local checkout directories for
> >>> >>> >>>>> HEAD
> >>> >>> >>>>> urls.
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>>
> >>> >>> >>>>>> + if len(layerlisturl) != 0:
> >>> >>> >>>>>> + layerlisturl = layerlisturl[0]
> >>> >>> >>>>>> + if len(layerlisturl) == 0:
> >>> >>> >>>>>> + if
> >>> >>> >>>>>> os.path.basename(localdirpath).startswith("_"):
> >>> >>> >>>>>> + layerlisturl = localdirpath
> >>> >>> >>>>>> if name != "bitbake":
> >>> >>> >>>>>> -
> >>>layerlist.append(localdirpath.rstrip("/"))
> >>> >>> >>>>>> + for gitlocal, localpath in
> >>> >>> >>>>>> gitrepos.iteritems():
> >>> >>> >>>>>> + if layerlisturl in gitlocal:
> >>> >>> >>>>>> + if len(localpath) > 2:
> >>> >>> >>>>>> + for paths in localpath:
> >>> >>> >>>>>> + if "bitbake" not in
> >>> >>> >>>>>> paths[1]:
> >>> >>> >>>>>> + layerlistdir =
> >>> >>> >>>>>> localdirpath
> >>> >>> >>>>>> +"/" + str(paths[1])
> >>> >>> >>>>>> + if layerlistdir not in
> >>> >>> >>>>>> layerlist:
> >>> >>> >>>>>> +
> >>> >>> >>>>>> layerlist.append(layerlistdir.rstrip("/"))
> >>> >>> >>>>>> + else:
> >>> >>> >>>>>> +
> >>> >>> >>>>>> layerlist.append(localdirpath.rstrip("/"))
> >>> >>> >>>>>> + break
> >>> >>> >>>>>> + if len(layerlist) == 0:
> >>> >>> >>>>>> + for gitlocal, localpath in
> >>> >>> >>>>>> gitrepos.iteritems():
> >>> >>> >>>>>> + for paths in localpath:
> >>> >>> >>>>>> + if "bitbake" not in paths:
> >>> >>> >>>>>> +
> >>> >>> >>>>>> layerlist.append(layerlisturl +
> >>> >>> >>>>>> "/"
> >>> >>> >>>>>> + str(paths[1]))
> >>> >>> >>>>>> +
> >>> >>> >>>>>>
> >>> >>> >>>>>> logger.debug("localhostbecontroller: current layer
> >>> >>> >>>>>> list
> >>> >>> >>>>>> %s "
> >>> >>> >>>>>> % pformat(layerlist))
> >>> >>> >>>>>>
> >>> >>> >>>>>> diff --git a/
> >>> >>> >>>>>>
> >>> >>> >>>>>>
> >>>bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >>> >>> >>>>>>
> >>> >>> >>>>>>
> >>>b/bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >>> >>> >>>>>> index 5022b59..a22f744 100644
> >>> >>> >>>>>> ---
> >>> >>> >>>>>>
> >>> >>> >>>>>>
> >>>a/bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >>> >>> >>>>>> +++
> >>> >>> >>>>>>
> >>> >>> >>>>>>
> >>>b/bitbake/lib/toaster/bldcontrol/management/commands/loadconf.py
> >>> >>> >>>>>> @@ -45,12 +45,14 @@ class Command(BaseCommand):
> >>> >>> >>>>>> for i in ['bitbake', 'releases', 'defaultrelease',
> >>> >>> >>>>>> 'config',
> >>> >>> >>>>>> 'layersources']:
> >>> >>> >>>>>> assert i in data
> >>> >>> >>>>>>
> >>> >>> >>>>>> - def _read_git_url_from_local_repository(address):
> >>> >>> >>>>>> + def _read_git_url_from_local_repository(address,
> >>>path
> >>> >>> >>>>>> =
> >>> >>> >>>>>> None):
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> If you want to pass in the path, please move the whole
> >>>function
> >>> >>> >>>>> outside
> >>> >>> >>>>> _import_layer_config, as it's no longer a closure.
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>>
> >>> >>> >>>>>> url = None
> >>> >>> >>>>>> + if not path:
> >>> >>> >>>>>> + path = os.path.dirname(filepath)
> >>> >>> >>>>>> # we detect the remote name at runtime
> >>> >>> >>>>>> import subprocess
> >>> >>> >>>>>> (remote, remote_name) = address.split(":", 1)
> >>> >>> >>>>>> - cmd = subprocess.Popen("git remote -v",
> >>> >>> >>>>>> shell=True,
> >>> >>> >>>>>> cwd =
> >>> >>> >>>>>> os.path.dirname(filepath), stdout=subprocess.PIPE, stderr =
> >>> >>> >>>>>> subprocess.PIPE)
> >>> >>> >>>>>> + cmd = subprocess.Popen("git remote -v",
> >>> >>> >>>>>> shell=True,
> >>> >>> >>>>>> cwd =
> >>> >>> >>>>>> path, stdout=subprocess.PIPE, stderr = subprocess.PIPE)
> >>> >>> >>>>>> (out,err) = cmd.communicate()
> >>> >>> >>>>>> if cmd.returncode != 0:
> >>> >>> >>>>>> logging.warning("Error while importing
> >>>layer
> >>> >>> >>>>>> vcs_url:
> >>> >>> >>>>>> git error: %s" % err)
> >>> >>> >>>>>> @@ -121,7 +123,11 @@ class Command(BaseCommand):
> >>> >>> >>>>>> logger.error("Local layer path %s
> >>>must
> >>> >>> >>>>>> exists. Are you trying to import a layer that does not
> >>>exist ?
> >>> >>> >>>>>> Check your
> >>> >>> >>>>>> local toasterconf.json" % lo.local_path)
> >>> >>> >>>>>>
> >>> >>> >>>>>> if
> >>> >>> >>>>>> layerinfo['vcs_url'].startswith("remote:"):
> >>> >>> >>>>>> - lo.vcs_url =
> >>> >>> >>>>>> _read_git_url_from_local_repository(layerinfo['vcs_url'])
> >>> >>> >>>>>> + if layerinfo['local_path'] not in
> >>> >>> >>>>>> ["meta",
> >>> >>> >>>>>> "meta-yocto", "meta-yocto-bsp"]:
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> Please don't use hardcoded layer names anywhere in the code.
> >>> >>> >>>>>
> >>> >>> >>>>> We do not want special handling for some layers, all layers
> >>>need
> >>> >>> >>>>> to
> >>> >>> >>>>> be
> >>> >>> >>>>> treated in the same, uniform, way.
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>> + repo_path =
> >>> >>> >>>>>> layerinfo['local_path']
> >>> >>> >>>>>> + else:
> >>> >>> >>>>>> + repo_path = None
> >>> >>> >>>>>> + lo.vcs_url =
> >>> >>> >>>>>> _read_git_url_from_local_repository(layerinfo['vcs_url'],
> >>> >>> >>>>>> repo_path)
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> I think this code needs
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>>
> >>> >>> >>>>>> if lo.vcs_url is None:
> >>> >>> >>>>>> logger.error("The toaster
> >>>config
> >>> >>> >>>>>> file
> >>> >>> >>>>>> references the local git repo, but Toaster cannot detect
> >>> >>> >>>>>> it.\nYour
> >>> >>> >>>>>> local
> >>> >>> >>>>>> configuration for layer %s is invalid. Make sure that the
> >>> >>> >>>>>> toasterconf.json
> >>> >>> >>>>>> file is correct." % layerinfo['name'])
> >>> >>> >>>>
> >>> >>> >>>>
> >>> >>> >>>> A bit more explanation would help me move further to improvise
> >>> >>> >>>> the
> >>> >>> >>>> patch. If you don't mind please? So if I understand correctly
> >>>a
> >>> >>> >>>> separate
> >>> >>> >>>> function should be there to handle HEAD branches provided by
> >>> >>> >>>> toasterconf.json file, right?
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>> Yep, exactly my point.
> >>> >>> >>>
> >>> >>> >>> When inserting the Layer_Version objects for the "HEAD" branch,
> >>> >>> >>> the
> >>> >>> >>> Layer_Version.local_path should
> >>> >>> >>>
> >>> >>> >>> be set to the layer path.
> >>> >>> >>>
> >>> >>> >>> When checking out the layers in localhost bbcontroller, the
> >>> >>> >>> checkout
> >>> >>> >>> should be skipped at all times for "HEAD" branches; instead,
> >>>the
> >>> >>> >>> value in
> >>> >>> >>> Layer_Version.local_path should be used.
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >> Is there a way to access local_path of toasterconf.json file
> >>>from
> >>> >>> >> localhostbecontroller.py file?
> >>> >>> >
> >>> >>> > I got the solution. I have modified local_path from "/" to the
> >>>value
> >>> >>> > in
> >>> >>> > the
> >>> >>> > configuration file in the database.
> >>> >>> >
> >>> >>> >
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>>>>>
> >>> >>> >>>>>>
> >>> >>> >>>>>> --
> >>> >>> >>>>>> 1.9.1
> >>> >>> >>>>>>
> >>> >>> >>>>>> --
> >>> >>> >>>>>> _______________________________________________
> >>> >>> >>>>>> toaster mailing list
> >>> >>> >>>>>> toaster at yoctoproject.org
> >>> >>> >>>>>>
> >https://lists.yoctoproject.org/listinfo/toaster
> ><https://lists.yoctoproject.org/listinfo/toaster>
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>>
> >>> >>> >>>>> --
> >>> >>> >>>>> Alex Damian
> >>> >>> >>>>> Yocto Project
> >>> >>> >>>>> SSG / OTC
> >>> >>> >>>>
> >>> >>> >>>>
> >>> >>> >>>>
> >>> >>> >>>>
> >>> >>> >>>> --
> >>> >>> >>>> സുജിത് ഹരിദാസന്
> >>> >>> >>>> Bangalore
> >>> >>> >>>> <Project>Contributor to KDE project
> >>> >>> >>>>
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><http://fci.wikia.com/wiki/Anti-DRM-Campaign>
> >>> >>> >>>> <Blog>
> >http://sujithh.info <http://sujithh.info>
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>>
> >>> >>> >>> --
> >>> >>> >>> Alex Damian
> >>> >>> >>> Yocto Project
> >>> >>> >>> SSG / OTC
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >>
> >>> >>> >> --
> >>> >>> >> സുജിത് ഹരിദാസന്
> >>> >>> >> Bangalore
> >>> >>> >> <Project>Contributor to KDE project
> >>> >>> >>
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><http://fci.wikia.com/wiki/Anti-DRM-Campaign>
> >>> >>> >> <Blog> http://sujithh.info
> >>> >>> >
> >>> >>> >
> >>> >>> > --
> >>> >>> > _______________________________________________
> >>> >>> > toaster mailing list
> >>> >>> > toaster at yoctoproject.org
> >>> >>> >
> >https://lists.yoctoproject.org/listinfo/toaster
> ><https://lists.yoctoproject.org/listinfo/toaster>
> >>> >>> >
> >>> >>
> >>> >>
> >>> >>
> >>> >>
> >>> >> --
> >>> >> സുജിത് ഹരിദാസന്
> >>> >> Bangalore
> >>> >> <Project>Contributor to KDE project
> >>> >>
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><http://fci.wikia.com/wiki/Anti-DRM-Campaign>
> >>> >> <Blog> http://sujithh.info
> >>> >
> >>> >
> >>> >
> >>> >
> >>> > --
> >>> > സുജിത് ഹരിദാസന്
> >>> > Bangalore
> >>> > <Project>Contributor to KDE project
> >>> >
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><http://fci.wikia.com/wiki/Anti-DRM-Campaign>
> >>> > <Blog> http://sujithh.info
> >>
> >>
> >>
> >>
> >> --
> >> സുജിത് ഹരിദാസന്
> >> Bangalore
> >> <Project>Contributor to KDE project
> >>
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><http://fci.wikia.com/wiki/Anti-DRM-Campaign>
> >> <Blog> http://sujithh.info
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--
> >സുജിത് ഹരിദാസന്
> >Bangalore
> ><Project>Contributor to KDE project
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><Blog> http://sujithh.info
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--
> >സുജിത് ഹരിദാസന്
> >Bangalore
> ><Project>Contributor to KDE project
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><Blog> http://sujithh.info
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--
> >സുജിത് ഹരിദാസന്
> >Bangalore
> ><Project>Contributor to KDE project
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><Blog> http://sujithh.info
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--
> >സുജിത് ഹരിദാസന്
> >Bangalore
> ><Project>Contributor to KDE project
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><Blog> http://sujithh.info
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >--
> >സുജിത് ഹരിദാസന്
> >Bangalore
> ><Project>Contributor to KDE project
> >http://fci.wikia.com/wiki/Anti-DRM-Campaign
> ><Blog> http://sujithh.info
> >
> >
> >
> >
> >
> >
>
>
--
സുജിത് ഹരിദാസന്
Bangalore
<Project>Contributor to KDE project
http://fci.wikia.com/wiki/Anti-DRM-Campaign
<Blog> http://sujithh.info
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/toaster/attachments/20150915/71b75451/attachment-0001.html>
More information about the toaster
mailing list