[Yocto-builds] buildbot failure in Yocto on romley

[Zhang, Jessica]

All the Edison meta-intel build failures is already aware of that is due to an error that will be fixed.



From: yocto-builds-bounces at yoctoproject.org [mailto:yocto-builds-bounces at yoctoproject.org] On Behalf Of elizabeth.flanagan at intel.com
Sent: Thursday, July 05, 2012 5:00 PM
To: yocto-builds at yoctoproject.org
Subject: [Yocto-builds] buildbot failure in Yocto on romley




Build status: FAILURE


Buildslave for this Build: ab08
Complete logs for all build steps: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123
Build Reason: Triggerable(romley)
Build Source Stamp: [branch edison] 8886aee5b9741c05886994967d9ecf420331c600
Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_27/logs/stdio


Last 20 lines of "shell_27.stdio":


meta-toolchain
meta-toolchain-sdk
adt-installer
meta-ide-support

You can also run generated qemu images with a command like 'runqemu qemux86'

Pseudo is not present but is required, building this first before the main build
DEBUG: Removed the following variables from the environment: LESS, NO_PROXY, XKEYSYMDB, HISTSIZE, LESS_ADVANCED_PREPROCESSOR, MANPATH, POKYREPO, PROFILEREAD, SSTATE_DIR, PYTHONPATH, BSP_WORKDIR, FuzzArch, BUILD_HISTORY_DIR, MAIL, MACHTYPE, SOURCE_PUBLISH_DIR, HOSTNAME, BSP_REPO, MINICOM, CSHEDIT, LESSOPEN, DL_DIR, CVS_RSH, INPUTRC, SLAVEBASEDIR, LSB_SSTATE_DIR, SOURCE_DL_DIR, PUBLISH_SSTATE, SHLVL, BSP_REV, CPU, EDITOR, BTARGET, LS_OPTIONS, XNLSPATH, LS_COLORS, XDG_CONFIG_DIRS, WINDOWMANAGER, BUILD_PUBLISH_DIR, PAGER, PUBLISH_BUILDS, BSP_BRANCH, QT_SYSTEM_DIR, LD_LIBRARY_PATH, G_BROKEN_FILENAMES, OSTYPE, BBFETCH2, NNTPSERVER, XCURSOR_THEME, G_FILENAME_ENCODING, HOST, GPG_TTY, FuzzSDK, ENABLE_SWABBER, FROM_HEADER, LESSCLOSE, BUILDDIR, mc, MFLAGS, ABTARGET, SOURCE_SSTATE_DIR, MAKELEVEL, BRANCH, BUILD_HISTORY_REPO, MORE, BUILD_HISTORY_COLLECT, HOSTTYPE, SSTATE_PUBLISH_DIR, MAKEFLAGS, machine, PUBLISH_SOURCE_MIRROR, FuzzImage, ABBASE, DEST, LESSKEY, SSTATE_BRANCH, EMGD_DRIVER_DIR, CLEAN_SOURCE_DIR, WORKDIR, PYTHONSTARTUP, REVISION
DEBUG: Found bblayers.conf (/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/conf/bblayers.conf)
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/conf/bblayers.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta/conf/layer.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta-yocto
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta-yocto/conf/layer.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/conf/layer.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley/conf/layer.conf
ERROR: Unable to parse /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley/conf/layer.conf: [Errno 2] No such file or directory: '/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley/conf/layer.conf'

Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_30/logs/stdio


Last 20 lines of "shell_30.stdio":


cp: cannot stat `*romley*': No such file or directory

Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_32/logs/stdio


Last 20 lines of "shell_32.stdio":


sending incremental file list
rsync: link_stat "/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/tmp/deploy/ipk" failed: No such file or directory (2)

sent 12 bytes received 12 bytes 48.00 bytes/sec
total size is 0 speedup is 0.00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7]

Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_34/logs/stdio


Last 20 lines of "shell_34.stdio":


sending incremental file list
rsync: link_stat "/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/tmp/deploy/rpm" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7]

sent 12 bytes received 12 bytes 48.00 bytes/sec
total size is 0 speedup is 0.00

Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_48/logs/stdio


Last 20 lines of "shell_48.stdio":


meta-toolchain
meta-toolchain-sdk
adt-installer
meta-ide-support

You can also run generated qemu images with a command like 'runqemu qemux86'

Pseudo is not present but is required, building this first before the main build
DEBUG: Removed the following variables from the environment: LESS, NO_PROXY, XKEYSYMDB, HISTSIZE, LESS_ADVANCED_PREPROCESSOR, MANPATH, POKYREPO, PROFILEREAD, SSTATE_DIR, PYTHONPATH, BSP_WORKDIR, FuzzArch, BUILD_HISTORY_DIR, MAIL, MACHTYPE, SOURCE_PUBLISH_DIR, HOSTNAME, BSP_REPO, MINICOM, CSHEDIT, LESSOPEN, DL_DIR, CVS_RSH, INPUTRC, SLAVEBASEDIR, LSB_SSTATE_DIR, SOURCE_DL_DIR, PUBLISH_SSTATE, SHLVL, BSP_REV, CPU, EDITOR, BTARGET, LS_OPTIONS, XNLSPATH, LS_COLORS, XDG_CONFIG_DIRS, WINDOWMANAGER, BUILD_PUBLISH_DIR, PAGER, PUBLISH_BUILDS, BSP_BRANCH, QT_SYSTEM_DIR, LD_LIBRARY_PATH, G_BROKEN_FILENAMES, OSTYPE, BBFETCH2, NNTPSERVER, XCURSOR_THEME, G_FILENAME_ENCODING, HOST, GPG_TTY, FuzzSDK, ENABLE_SWABBER, FROM_HEADER, LESSCLOSE, BUILDDIR, mc, MFLAGS, ABTARGET, SOURCE_SSTATE_DIR, MAKELEVEL, BRANCH, BUILD_HISTORY_REPO, MORE, BUILD_HISTORY_COLLECT, HOSTTYPE, SSTATE_PUBLISH_DIR, MAKEFLAGS, machine, PUBLISH_SOURCE_MIRROR, FuzzImage, ABBASE, DEST, LESSKEY, SSTATE_BRANCH, EMGD_DRIVER_DIR, CLEAN_SOURCE_DIR, WORKDIR, PYTHONSTARTUP, REVISION
DEBUG: Found bblayers.conf (/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/conf/bblayers.conf)
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/conf/bblayers.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta/conf/layer.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta-yocto
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/meta-yocto/conf/layer.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/conf/layer.conf
DEBUG: Adding layer /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley
DEBUG: LOAD /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley/conf/layer.conf
ERROR: Unable to parse /srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley/conf/layer.conf: [Errno 2] No such file or directory: '/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/yocto/meta-intel/meta-romley/conf/layer.conf'

Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_51/logs/stdio


Last 20 lines of "shell_51.stdio":


cp: cannot stat `*romley*': No such file or directory

Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_53/logs/stdio


Last 20 lines of "shell_53.stdio":


sending incremental file list
rsync: link_stat "/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/tmp/deploy/ipk" failed: No such file or directory (2)

sent 12 bytes received 12 bytes 48.00 bytes/sec
total size is 0 speedup is 0.00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7]

Detailed log of last build step: http://autobuilder.yoctoproject.org:8010/builders/romley/builds/123/steps/shell_55/logs/stdio


Last 20 lines of "shell_55.stdio":


sending incremental file list
rsync: link_stat "/srv/home/pokybuild/yocto-autobuilder/yocto-slave/romley/build/build/tmp/deploy/rpm" failed: No such file or directory (2)

sent 12 bytes received 12 bytes 48.00 bytes/sec
total size is 0 speedup is 0.00
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7]



-The Yocto BuildBot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto-builds/attachments/20120706/94e353f8/attachment-0001.html>