[Yocto-builds] buildbot failure in The Yocto Autobuilder on nightly-mips

Fri Apr 26 18:34:57 PDT 2013

On 04/26/2013 02:45 PM, Khem Raj wrote:
> Saul
>
> i am not subscribed to this ml so I did not get this email. hmmm it builds ok for qemumips target here for me. its probably some weird
> race that you hit with high parallelism or some kind there of.  send me the link to complete logs
>

It's not just mips, if you can scan the autobuilder, you will see all 
failures there where gcc failures and also I think arm had a gmp failure.

http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120/steps/Building%20Images/logs/stdio

Sau!

> On Apr 26, 2013, at 2:37 PM, Saul Wold <sgw at linux.intel.com> wrote:
>
>>
>> Hi Khem,
>>
>> Any progress on getting this gcc issue fixed?
>>
>>
>> Thanks
>> 	Sau!
>>
>>
>> On 04/26/2013 02:16 PM, yocto-builds at yoctoproject.org wrote:
>>>
>>>         Build status: FAILURE
>>>
>>> Buildslave for this Build: *ab06*
>>> Complete logs for all build steps:
>>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120
>>> Build Reason: Triggerable(trigger_nightly-mips)
>>> Build Properties: *Properties(**{u'bb_trigger_oecore_nightly-mips':
>>> None, u'bb_trigger_meta-qt3_nightly-mips': u'2', u'scheduler':
>>> u'trigger_nightly-mips', 'repourl_poky':
>>> u'git://git.yoctoproject.org/poky-contrib.git', 'got_revision':
>>> 'bd3c4df3ffb02a650b43620fb849a62905ffc795', 'branch_meta-qt3':
>>> u'master', u'bb_trigger_meta-fsl-ppc_nightly-mips': None,
>>> 'got_revision_poky': 'bd3c4df3ffb02a650b43620fb849a62905ffc795',
>>> u'commit_trigger_eclipse-poky_nightly-mips': None,
>>> u'repo_trigger_meta-fsl-arm_nightly-mips': None, 'commit_meta-qt3':
>>> u'HEAD', u'branch_trigger_eclipse-poky_nightly-mips': None,
>>> u'repo_trigger_bitbake_nightly-mips': None,
>>> u'bb_trigger_poky_nightly-mips': u'1',
>>> u'bb_trigger_meta-fsl-arm_nightly-mips': None, 'commit-description':
>>> 'dylan-9.0.0', u'repo_trigger_oecore_nightly-mips': None,
>>> u'repo_trigger_meta-intel_nightly-mips': None,
>>> u'bb_trigger_eclipse-poky_nightly-mips': None, 'slavename': 'ab06',
>>> u'branch_trigger_oecore_nightly-mips': None, 'branch': u'',
>>> 'buildnumber': 120, 'distroversion': '1.3+snapshot', 'revision':
>>> u'bd3c4df3ffb02a650b43620fb849a62905ffc795', 'workdir':
>>> '/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips',
>>> u'branch_trigger_meta-qt3_nightly-mips': u'master', 'commit_poky':
>>> u'HEAD', 'repository': '', 'buildername': 'nightly-mips', u'DEST':
>>> u'/srv/www/vhosts/autobuilder.yoctoproject.org/pub/nightly/20130426-1',
>>> u'repo_trigger_poky_nightly-mips':
>>> u'git://git.yoctoproject.org/poky-contrib.git',
>>> u'commit_trigger_meta-fsl-ppc_nightly-mips': None,
>>> u'branch_trigger_bitbake_nightly-mips': None, 'codebase': '',
>>> u'repo_trigger_meta-fsl-ppc_nightly-mips': None,
>>> u'commit_trigger_meta-fsl-arm_nightly-mips': None,
>>> 'got_revision_meta-qt3': '4c27cce6688aa39852f3cba5e7b80ec279019605',
>>> u'repo_trigger_meta-qt3_nightly-mips':
>>> u'git://git.yoctoproject.org/meta-qt3',
>>> u'commit_trigger_meta-qt3_nightly-mips': u'HEAD',
>>> u'bb_trigger_meta-intel_nightly-mips': None,
>>> u'branch_trigger_meta-intel_nightly-mips': None,
>>> u'branch_trigger_poky_nightly-mips': u'stage/master_under_test',
>>> u'commit_trigger_poky_nightly-mips': u'HEAD',
>>> u'commit_trigger_bitbake_nightly-mips': None,
>>> u'branch_trigger_meta-fsl-ppc_nightly-mips': None,
>>> u'repo_trigger_eclipse-poky_nightly-mips': None, 'project': '',
>>> u'commit_trigger_oecore_nightly-mips': None,
>>> u'branch_trigger_meta-fsl-arm_nightly-mips': None,
>>> u'commit_trigger_meta-intel_nightly-mips': None, 'branch_poky':
>>> u'stage/master_under_test', 'repourl_meta-qt3':
>>> u'git://git.yoctoproject.org/meta-qt3',
>>> u'bb_trigger_bitbake_nightly-mips': None})*
>>> /Detailed log of last build step:/
>>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120/steps/Building
>>> Images/logs/stdio
>>>
>>>
>>>         Last 20 lines of "Building Images.stdio" Error log:
>>>
>>> | config.status: creating omp_lib.h
>>> | config.status: creating omp_lib.f90
>>> | config.status: creating libgomp_f.h
>>> | config.status: creating Makefile
>>> | config.status: creating testsuite/Makefile
>>> | config.status: creating libgomp.spec
>>> | config.status: creating config.h
>>> | config.status: executing default-1 commands
>>> | Adding multilib support to Makefile in
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libgomp
>>> | multidirs=
>>> | with_multisubdir=
>>> | config.status: executing depfiles commands
>>> | config.status: executing libtool commands
>>> | config.status: executing gstdint.h commands
>>> | make[1]: Leaving directory
>>> `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/gcc-4.8.0/build.mips-poky-linux.mips-poky-linux'
>>> | make: *** [all] Error 2
>>> | ERROR: oe_runmake failed
>>> | ERROR: Function failed: do_compile (see
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/temp/log.do_compile.17137
>>> for further information)
>>> ERROR: Task 4898
>>> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/meta/recipes-devtools/gcc/gcc_4.8.bb,
>>> do_compile) failed with exit code '1'
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>> /Detailed log of last build step:/
>>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120/steps/Running
>>> Sanity Tests/logs/stdio
>>>
>>>
>>>         Last 20 lines of "Running Sanity Tests.stdio" Error log:
>>>
>>> | Test_Info: No core-image-sato rootfs image file found under
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/deploy/images
>>> for qemumips, pls. have a check
>>> | Test_Info: Dmesg Test FAIL, Pls. check above error log
>>> | Test_Info: Do not kill the qemu process and use it for later testing
>>> (step 6 of 7)
>>> | NOTE: Run shutdown test in scenario sanity
>>> | Test_Info: No core-image-sato rootfs image file found under
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/deploy/images
>>> for qemumips, pls. have a check
>>> | Test_Info: Shutdown Test FAIL
>>> | NOTE: Test Result for qemumips core-image-sato
>>> | NOTE: Testcase PASS FAIL NORESULT
>>> | NOTE: SSH 0 1 0
>>> | NOTE: SCP 0 1 0
>>> | NOTE: smart_help 0 1 0
>>> | NOTE: smart_query 0 1 0
>>> | NOTE: rpm_query 0 1 0
>>> | NOTE: connman 0 1 0
>>> | NOTE: dmesg 0 1 0
>>> | NOTE: shutdown 0 1 0
>>> | DEBUG: Python function do_qemuimagetest_standalone finished
>>> | ERROR: Function failed: Some testcases fail, pls. check test result
>>> and test log!!!
>>> ERROR: Task 1
>>> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/meta/recipes-sato/images/core-image-sato.bb,
>>> do_qemuimagetest_standalone) failed with exit code '1'
>>> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>>>
>>> /Detailed log of last build step:/
>>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120/steps/Building
>>> Images_1/logs/stdio
>>>
>>>
>>>         Last 20 lines of "Building Images_1.stdio" Error log:
>>>
>>> | -e 's/\(GCC[ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*_H\)/_GLIBCXX_\1/g' \
>>> | <
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libstdc++-v3/../libgcc/gthr-single.h
>>>> mips-poky-linux/bits/gthr-single.h
>>> | sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
>>> | -e 's/\(GCC[ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*_H\)/_GLIBCXX_\1/g' \
>>> | -e 's/SUPPORTS_WEAK/__GXX_WEAK__/g' \
>>> | -e 's/\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*USE_WEAK\)/_GLIBCXX_\1/g' \
>>> | <
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libstdc++-v3/../libgcc/gthr-posix.h
>>>> mips-poky-linux/bits/gthr-posix.h
>>> | sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
>>> | -e 's/\(GCC[ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*_H\)/_GLIBCXX_\1/g' \
>>> | -e 's/SUPPORTS_WEAK/__GXX_WEAK__/g' \
>>> | -e 's/\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*USE_WEAK\)/_GLIBCXX_\1/g' \
>>> | -e 's,^#include "\(.*\)",#include ,g' \
>>> | <
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libstdc++-v3/../libgcc/gthr-posix.h
>>>> mips-poky-linux/bits/gthr-default.h
>>> | make[2]: Leaving directory
>>> `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/gcc-4.8.0/build.mips-poky-linux.mips-poky-linux/mips-poky-linux/libstdc++-v3/include'
>>> | make[1]: Leaving directory
>>> `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/gcc-4.8.0/build.mips-poky-linux.mips-poky-linux'
>>> | make: *** [all] Error 2
>>> | ERROR: oe_runmake failed
>>> | ERROR: Function failed: do_compile (see
>>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/temp/log.do_compile.15134
>>> for further information)
>>> ERROR: Task 4760
>>> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/meta/recipes-devtools/gcc/gcc_4.8.bb,
>>> do_compile) failed with exit code '1'
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>>
>>>
>>> *-The Yocto BuildBot*
>>>
>>>
>>> _______________________________________________
>>> Yocto-builds mailing list
>>> Yocto-builds at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto-builds
>>>
>
>
>