[Yocto-builds] buildbot failure in The Yocto Autobuilder on nightly-mips

Fri Apr 26 14:45:09 PDT 2013

Saul

i am not subscribed to this ml so I did not get this email. hmmm it builds ok for qemumips target here for me. its probably some weird
race that you hit with high parallelism or some kind there of.  send me the link to complete logs

On Apr 26, 2013, at 2:37 PM, Saul Wold <sgw at linux.intel.com> wrote:

> 
> Hi Khem,
> 
> Any progress on getting this gcc issue fixed?
> 
> 
> Thanks
> 	Sau!
> 
> 
> On 04/26/2013 02:16 PM, yocto-builds at yoctoproject.org wrote:
>> 
>>        Build status: FAILURE
>> 
>> Buildslave for this Build: *ab06*
>> Complete logs for all build steps:
>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120
>> Build Reason: Triggerable(trigger_nightly-mips)
>> Build Properties: *Properties(**{u'bb_trigger_oecore_nightly-mips':
>> None, u'bb_trigger_meta-qt3_nightly-mips': u'2', u'scheduler':
>> u'trigger_nightly-mips', 'repourl_poky':
>> u'git://git.yoctoproject.org/poky-contrib.git', 'got_revision':
>> 'bd3c4df3ffb02a650b43620fb849a62905ffc795', 'branch_meta-qt3':
>> u'master', u'bb_trigger_meta-fsl-ppc_nightly-mips': None,
>> 'got_revision_poky': 'bd3c4df3ffb02a650b43620fb849a62905ffc795',
>> u'commit_trigger_eclipse-poky_nightly-mips': None,
>> u'repo_trigger_meta-fsl-arm_nightly-mips': None, 'commit_meta-qt3':
>> u'HEAD', u'branch_trigger_eclipse-poky_nightly-mips': None,
>> u'repo_trigger_bitbake_nightly-mips': None,
>> u'bb_trigger_poky_nightly-mips': u'1',
>> u'bb_trigger_meta-fsl-arm_nightly-mips': None, 'commit-description':
>> 'dylan-9.0.0', u'repo_trigger_oecore_nightly-mips': None,
>> u'repo_trigger_meta-intel_nightly-mips': None,
>> u'bb_trigger_eclipse-poky_nightly-mips': None, 'slavename': 'ab06',
>> u'branch_trigger_oecore_nightly-mips': None, 'branch': u'',
>> 'buildnumber': 120, 'distroversion': '1.3+snapshot', 'revision':
>> u'bd3c4df3ffb02a650b43620fb849a62905ffc795', 'workdir':
>> '/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips',
>> u'branch_trigger_meta-qt3_nightly-mips': u'master', 'commit_poky':
>> u'HEAD', 'repository': '', 'buildername': 'nightly-mips', u'DEST':
>> u'/srv/www/vhosts/autobuilder.yoctoproject.org/pub/nightly/20130426-1',
>> u'repo_trigger_poky_nightly-mips':
>> u'git://git.yoctoproject.org/poky-contrib.git',
>> u'commit_trigger_meta-fsl-ppc_nightly-mips': None,
>> u'branch_trigger_bitbake_nightly-mips': None, 'codebase': '',
>> u'repo_trigger_meta-fsl-ppc_nightly-mips': None,
>> u'commit_trigger_meta-fsl-arm_nightly-mips': None,
>> 'got_revision_meta-qt3': '4c27cce6688aa39852f3cba5e7b80ec279019605',
>> u'repo_trigger_meta-qt3_nightly-mips':
>> u'git://git.yoctoproject.org/meta-qt3',
>> u'commit_trigger_meta-qt3_nightly-mips': u'HEAD',
>> u'bb_trigger_meta-intel_nightly-mips': None,
>> u'branch_trigger_meta-intel_nightly-mips': None,
>> u'branch_trigger_poky_nightly-mips': u'stage/master_under_test',
>> u'commit_trigger_poky_nightly-mips': u'HEAD',
>> u'commit_trigger_bitbake_nightly-mips': None,
>> u'branch_trigger_meta-fsl-ppc_nightly-mips': None,
>> u'repo_trigger_eclipse-poky_nightly-mips': None, 'project': '',
>> u'commit_trigger_oecore_nightly-mips': None,
>> u'branch_trigger_meta-fsl-arm_nightly-mips': None,
>> u'commit_trigger_meta-intel_nightly-mips': None, 'branch_poky':
>> u'stage/master_under_test', 'repourl_meta-qt3':
>> u'git://git.yoctoproject.org/meta-qt3',
>> u'bb_trigger_bitbake_nightly-mips': None})*
>> /Detailed log of last build step:/
>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120/steps/Building
>> Images/logs/stdio
>> 
>> 
>>        Last 20 lines of "Building Images.stdio" Error log:
>> 
>> | config.status: creating omp_lib.h
>> | config.status: creating omp_lib.f90
>> | config.status: creating libgomp_f.h
>> | config.status: creating Makefile
>> | config.status: creating testsuite/Makefile
>> | config.status: creating libgomp.spec
>> | config.status: creating config.h
>> | config.status: executing default-1 commands
>> | Adding multilib support to Makefile in
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libgomp
>> | multidirs=
>> | with_multisubdir=
>> | config.status: executing depfiles commands
>> | config.status: executing libtool commands
>> | config.status: executing gstdint.h commands
>> | make[1]: Leaving directory
>> `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/gcc-4.8.0/build.mips-poky-linux.mips-poky-linux'
>> | make: *** [all] Error 2
>> | ERROR: oe_runmake failed
>> | ERROR: Function failed: do_compile (see
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/temp/log.do_compile.17137
>> for further information)
>> ERROR: Task 4898
>> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/meta/recipes-devtools/gcc/gcc_4.8.bb,
>> do_compile) failed with exit code '1'
>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>> 
>> /Detailed log of last build step:/
>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120/steps/Running
>> Sanity Tests/logs/stdio
>> 
>> 
>>        Last 20 lines of "Running Sanity Tests.stdio" Error log:
>> 
>> | Test_Info: No core-image-sato rootfs image file found under
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/deploy/images
>> for qemumips, pls. have a check
>> | Test_Info: Dmesg Test FAIL, Pls. check above error log
>> | Test_Info: Do not kill the qemu process and use it for later testing
>> (step 6 of 7)
>> | NOTE: Run shutdown test in scenario sanity
>> | Test_Info: No core-image-sato rootfs image file found under
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/deploy/images
>> for qemumips, pls. have a check
>> | Test_Info: Shutdown Test FAIL
>> | NOTE: Test Result for qemumips core-image-sato
>> | NOTE: Testcase PASS FAIL NORESULT
>> | NOTE: SSH 0 1 0
>> | NOTE: SCP 0 1 0
>> | NOTE: smart_help 0 1 0
>> | NOTE: smart_query 0 1 0
>> | NOTE: rpm_query 0 1 0
>> | NOTE: connman 0 1 0
>> | NOTE: dmesg 0 1 0
>> | NOTE: shutdown 0 1 0
>> | DEBUG: Python function do_qemuimagetest_standalone finished
>> | ERROR: Function failed: Some testcases fail, pls. check test result
>> and test log!!!
>> ERROR: Task 1
>> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/meta/recipes-sato/images/core-image-sato.bb,
>> do_qemuimagetest_standalone) failed with exit code '1'
>> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>> 
>> /Detailed log of last build step:/
>> http://autobuilder.yoctoproject.org:8011/builders/nightly-mips/builds/120/steps/Building
>> Images_1/logs/stdio
>> 
>> 
>>        Last 20 lines of "Building Images_1.stdio" Error log:
>> 
>> | -e 's/\(GCC[ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*_H\)/_GLIBCXX_\1/g' \
>> | <
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libstdc++-v3/../libgcc/gthr-single.h
>> > mips-poky-linux/bits/gthr-single.h
>> | sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
>> | -e 's/\(GCC[ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*_H\)/_GLIBCXX_\1/g' \
>> | -e 's/SUPPORTS_WEAK/__GXX_WEAK__/g' \
>> | -e 's/\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*USE_WEAK\)/_GLIBCXX_\1/g' \
>> | <
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libstdc++-v3/../libgcc/gthr-posix.h
>> > mips-poky-linux/bits/gthr-posix.h
>> | sed -e 's/\(UNUSED\)/_GLIBCXX_\1/g' \
>> | -e 's/\(GCC[ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*_H\)/_GLIBCXX_\1/g' \
>> | -e 's/SUPPORTS_WEAK/__GXX_WEAK__/g' \
>> | -e 's/\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_]*USE_WEAK\)/_GLIBCXX_\1/g' \
>> | -e 's,^#include "\(.*\)",#include ,g' \
>> | <
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libstdc++-v3/../libgcc/gthr-posix.h
>> > mips-poky-linux/bits/gthr-default.h
>> | make[2]: Leaving directory
>> `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/gcc-4.8.0/build.mips-poky-linux.mips-poky-linux/mips-poky-linux/libstdc++-v3/include'
>> | make[1]: Leaving directory
>> `/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/gcc-4.8.0/build.mips-poky-linux.mips-poky-linux'
>> | make: *** [all] Error 2
>> | ERROR: oe_runmake failed
>> | ERROR: Function failed: do_compile (see
>> /srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/build/tmp/work/mips32-poky-linux/gcc/4.8.0-r0/temp/log.do_compile.15134
>> for further information)
>> ERROR: Task 4760
>> (/srv/home/pokybuild/yocto-autobuilder-new/yocto-slave/nightly-mips/build/meta/recipes-devtools/gcc/gcc_4.8.bb,
>> do_compile) failed with exit code '1'
>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>> 
>> 
>> 
>> *-The Yocto BuildBot*
>> 
>> 
>> _______________________________________________
>> Yocto-builds mailing list
>> Yocto-builds at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto-builds
>> 