[yocto] Problem in running poky-qemu

[sachin kumar]

Hello Jessica:

Thanks for your swift response, as per your suggestions i have downloaded
yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2 file from yocto website.
I have installed the same.
you can see now content of my /opt/poky folder as following

[sachin at sachinlinux yocto_tools]$ ls /opt/poky/
environment-setup-i586-poky-linux     site-config-i586-poky-linux
sysroots                 version-ppc603e-poky-linux
environment-setup-ppc603e-poky-linux  site-config-ppc603e-poky-linux
version-i586-poky-linux
[sachin at sachinlinux yocto_tools]$

But despite that i am getting same message

[sachin at sachinlinux yocto_tools]$ poky-qemu zImage-2.6.34-qemuppc-0.9.bin
yocto-image-minimal-qemuppc-0.9.rootfs.ext3
Set MACHINE to [qemuppc-0] based on kernel [zImage-2.6.34-qemuppc-0.9.bin]
In order for this script to dynamically infer paths
to kernels or filesystem images, you either need
bitbake in your PATH or to source poky-init-build-env
before running this script
[sachin at sachinlinux yocto_tools]$


I do not which script this is referring.
Please help me.

Kind regards

Sachin




On Thu, Nov 11, 2010 at 7:59 AM, Zhang, Jessica <jessica.zhang at intel.com>wrote:

>  Hi Sachin,
>
> First of all, if you want to run ppc, the toolchain you need to download is
> yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2.  After you install it
> under /opt/poky, you should go under /opt/poky and source the
> environment-setup-ppc* and try start qemu again...
>
> Let us know if you still run into issues.
>
> Thanks,
> Jessica
>
>  ------------------------------
> *From:* yocto-bounces at yoctoproject.org [mailto:
> yocto-bounces at yoctoproject.org] *On Behalf Of *sachin kumar
> *Sent:* Wednesday, November 10, 2010 6:09 PM
> *To:* yocto at yoctoproject.org
> *Subject:* [yocto] Problem in running poky-qemu
>
> Dear All:
>
> I am new to qemu, so please excuse me, i am asking basic question.
>
> Actually i want to run linux image for ppc on qemu.
>
> My host machine is running Fedora13.
>
> For that i have downloaded following from yocto project website.
>
> Disk Image: yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> Kernel Image : zImage-2.6.34-qemuppc-0.9.bin
> Toolchain: yocto-eglibc-i586-i586-toolchain-sdk-0.9.tar.bz2
>
> Now toolchain was installed properly.
>
> Now when i am running poky-qemu from command line it is giving following
> message
>
> =============================================================================================
> [root at sachinlinux yocto_tools]# poky-qemu zImage-2.6.34-qemuppc-0.9.bin
> yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> Set MACHINE to [qemuppc-0] based on kernel [zImage-2.6.34-qemuppc-0.9.bin]
> In order for this script to dynamically infer paths
> to kernels or filesystem images, you either need
> bitbake in your PATH or to source poky-init-build-env
> before running this script
>
>
> =============================================================================================
> I am blank about this message, which script they are referring.
> Please help me for the same.
> This will be a great help for me as i am at critical phase of one of my
> project.
>
> Kind Regards
> Sachin
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20101111/327dbe71/attachment.html>