[yocto] Problem in running poky-qemu

[sachin kumar]

Hi:

i am sorry, again i am getting same message.

Regards
Sachin

On 11/12/10, Zhang, Jessica <jessica.zhang at intel.com> wrote:
> Hi Sachin,
>
> under /opt/poky, can you do the following in exact sequence:
> 1. source environment-setup-ppc603e-poky-linux
> 2. poky-qemy qemuppc zImage-2.6.34.qemuppc-0.9.bin
> yocto-image-minimal-qemuppc-0.9.rootfs.ext3
>
> Thanks,
> Jessica
>
>   _____
>
> From: sachindhiman123 at gmail.com [mailto:sachindhiman123 at gmail.com] On Behalf
> Of sachin kumar
> Sent: Thursday, November 11, 2010 8:19 AM
> To: Zhang, Jessica
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] Problem in running poky-qemu
>
>
> Hello Jessica:
>
> Thanks for your swift response, as per your suggestions i have downloaded
> yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2 file from yocto website.
> I have installed the same.
> you can see now content of my /opt/poky folder as following
>
> [sachin at sachinlinux yocto_tools]$ ls /opt/poky/
> environment-setup-i586-poky-linux     site-config-i586-poky-linux
> sysroots                 version-ppc603e-poky-linux
> environment-setup-ppc603e-poky-linux  site-config-ppc603e-poky-linux
> version-i586-poky-linux
> [sachin at sachinlinux yocto_tools]$
>
> But despite that i am getting same message
>
> [sachin at sachinlinux yocto_tools]$ poky-qemu zImage-2.6.34-qemuppc-0.9.bin
> yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> Set MACHINE to [qemuppc-0] based on kernel [zImage-2.6.34-qemuppc-0.9.bin]
> In order for this script to dynamically infer paths
> to kernels or filesystem images, you either need
> bitbake in your PATH or to source poky-init-build-env
> before running this script
> [sachin at sachinlinux yocto_tools]$
>
>
> I do not which script this is referring.
> Please help me.
>
> Kind regards
>
> Sachin
>
>
>
>
>
> On Thu, Nov 11, 2010 at 7:59 AM, Zhang, Jessica <jessica.zhang at intel.com>
> wrote:
>
>
> Hi Sachin,
>
> First of all, if you want to run ppc, the toolchain you need to download is
> yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2.  After you install it
> under /opt/poky, you should go under /opt/poky and source the
> environment-setup-ppc* and try start qemu again...
>
> Let us know if you still run into issues.
>
> Thanks,
> Jessica
>
>   _____
>
> From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org]
> On Behalf Of sachin kumar
> Sent: Wednesday, November 10, 2010 6:09 PM
> To: yocto at yoctoproject.org
> Subject: [yocto] Problem in running poky-qemu
>
>
> Dear All:
>
> I am new to qemu, so please excuse me, i am asking basic question.
>
> Actually i want to run linux image for ppc on qemu.
>
> My host machine is running Fedora13.
>
> For that i have downloaded following from yocto project website.
>
> Disk Image: yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> Kernel Image : zImage-2.6.34-qemuppc-0.9.bin
> Toolchain: yocto-eglibc-i586-i586-toolchain-sdk-0.9.tar.bz2
>
> Now toolchain was installed properly.
>
> Now when i am running poky-qemu from command line it is giving following
> message
> ============================================================================
> =================
> [root at sachinlinux yocto_tools]# poky-qemu zImage-2.6.34-qemuppc-0.9.bin
> yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> Set MACHINE to [qemuppc-0] based on kernel [zImage-2.6.34-qemuppc-0.9.bin]
> In order for this script to dynamically infer paths
> to kernels or filesystem images, you either need
> bitbake in your PATH or to source poky-init-build-env
> before running this script
>
> ============================================================================
> =================
> I am blank about this message, which script they are referring.
> Please help me for the same.
> This will be a great help for me as i am at critical phase of one of my
> project.
>
> Kind Regards
> Sachin
>
>
>
>
>
>
>
>