[yocto] Problem in running poky-qemu

[sachin kumar]

Please help me i am still having same issue.


On Fri, Nov 12, 2010 at 5:01 PM, sachin kumar <sachinsomeone at gmail.com>wrote:

> Hi:
>
> i am sorry, again i am getting same message.
>
> Regards
> Sachin
>
> On 11/12/10, Zhang, Jessica <jessica.zhang at intel.com> wrote:
> > Hi Sachin,
> >
> > under /opt/poky, can you do the following in exact sequence:
> > 1. source environment-setup-ppc603e-poky-linux
> > 2. poky-qemy qemuppc zImage-2.6.34.qemuppc-0.9.bin
> > yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> >
> > Thanks,
> > Jessica
> >
> >   _____
> >
> > From: sachindhiman123 at gmail.com [mailto:sachindhiman123 at gmail.com] On
> Behalf
> > Of sachin kumar
> > Sent: Thursday, November 11, 2010 8:19 AM
> > To: Zhang, Jessica
> > Cc: yocto at yoctoproject.org
> > Subject: Re: [yocto] Problem in running poky-qemu
> >
> >
> > Hello Jessica:
> >
> > Thanks for your swift response, as per your suggestions i have downloaded
> > yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2 file from yocto
> website.
> > I have installed the same.
> > you can see now content of my /opt/poky folder as following
> >
> > [sachin at sachinlinux yocto_tools]$ ls /opt/poky/
> > environment-setup-i586-poky-linux     site-config-i586-poky-linux
> > sysroots                 version-ppc603e-poky-linux
> > environment-setup-ppc603e-poky-linux  site-config-ppc603e-poky-linux
> > version-i586-poky-linux
> > [sachin at sachinlinux yocto_tools]$
> >
> > But despite that i am getting same message
> >
> > [sachin at sachinlinux yocto_tools]$ poky-qemu
> zImage-2.6.34-qemuppc-0.9.bin
> > yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> > Set MACHINE to [qemuppc-0] based on kernel
> [zImage-2.6.34-qemuppc-0.9.bin]
> > In order for this script to dynamically infer paths
> > to kernels or filesystem images, you either need
> > bitbake in your PATH or to source poky-init-build-env
> > before running this script
> > [sachin at sachinlinux yocto_tools]$
> >
> >
> > I do not which script this is referring.
> > Please help me.
> >
> > Kind regards
> >
> > Sachin
> >
> >
> >
> >
> >
> > On Thu, Nov 11, 2010 at 7:59 AM, Zhang, Jessica <jessica.zhang at intel.com
> >
> > wrote:
> >
> >
> > Hi Sachin,
> >
> > First of all, if you want to run ppc, the toolchain you need to download
> is
> > yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2.  After you install
> it
> > under /opt/poky, you should go under /opt/poky and source the
> > environment-setup-ppc* and try start qemu again...
> >
> > Let us know if you still run into issues.
> >
> > Thanks,
> > Jessica
> >
> >   _____
> >
> > From: yocto-bounces at yoctoproject.org [mailto:
> yocto-bounces at yoctoproject.org]
> > On Behalf Of sachin kumar
> > Sent: Wednesday, November 10, 2010 6:09 PM
> > To: yocto at yoctoproject.org
> > Subject: [yocto] Problem in running poky-qemu
> >
> >
> > Dear All:
> >
> > I am new to qemu, so please excuse me, i am asking basic question.
> >
> > Actually i want to run linux image for ppc on qemu.
> >
> > My host machine is running Fedora13.
> >
> > For that i have downloaded following from yocto project website.
> >
> > Disk Image: yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> > Kernel Image : zImage-2.6.34-qemuppc-0.9.bin
> > Toolchain: yocto-eglibc-i586-i586-toolchain-sdk-0.9.tar.bz2
> >
> > Now toolchain was installed properly.
> >
> > Now when i am running poky-qemu from command line it is giving following
> > message
> >
> ============================================================================
> > =================
> > [root at sachinlinux yocto_tools]# poky-qemu zImage-2.6.34-qemuppc-0.9.bin
> > yocto-image-minimal-qemuppc-0.9.rootfs.ext3
> > Set MACHINE to [qemuppc-0] based on kernel
> [zImage-2.6.34-qemuppc-0.9.bin]
> > In order for this script to dynamically infer paths
> > to kernels or filesystem images, you either need
> > bitbake in your PATH or to source poky-init-build-env
> > before running this script
> >
> >
> ============================================================================
> > =================
> > I am blank about this message, which script they are referring.
> > Please help me for the same.
> > This will be a great help for me as i am at critical phase of one of my
> > project.
> >
> > Kind Regards
> > Sachin
> >
> >
> >
> >
> >
> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20101124/975f1654/attachment.html>