[yocto] GLIBCTARGETOS ?= "linux-gnueabi" for PowerPC 440 targets

[Elvis Dowson]

Hi,

On Aug 2, 2012, at 10:21 AM, Khem Raj wrote:

> 
> On Aug 1, 2012, at 8:50 PM, McClintock Matthew-B29882 <B29882 at freescale.com> wrote:
> 
>> Are you running with prelinking? You might try disabling that. It's in
>> local.conf under IMAGE_CLASSES I believe.
>> 
> 
> FWIW I have seen issues with prelink + ppc64 that said ppc32 + prelink has worked well for me
> 

I tried rebuilding the entire yocto build without image-prelink, and still no change, I still do not get
a root login prompt.

Any suggestions on what else I can try? 

zImage starting: loaded at 0x00800000 (sp: 0x00d8afb0)
Allocating 0x540e0c bytes for kernel ...
gunzipping (0x00000000 <- 0x0080f000:0x00a17dd6)...done 0x4235c0 bytes
Attached initrd image at 0x00a18000-0x00d89ddc
initrd head: 0x1f8b0808

Linux/PowerPC load: console=ttyS0,9600n8 ip=off root=/dev/ram rw rootwait
Finalizing device tree... flat tree at 0xd970e0
 PM: Adding info for No Bus:ttyv9
[    0.477306] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.482790] 83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 20) is a 16550
[    0.678224] console [ttyS0] enabled
[    0.742215] brd: module loaded
[    0.789116] loop: module loaded
[    0.826377] xsysace 83600000.sysace: Xilinx SystemACE revision 1.0.12
[    0.903095] xsysace 83600000.sysace: No CF in slot
[    0.962077] Xilinx SystemACE device driver, major=254
[    1.023122] xilinx_emaclite 81000000.ethernet: Device Tree Probing
[    1.096656] xilinx_emaclite 81000000.ethernet: error registering MDIO bus
[    1.177745] xilinx_emaclite 81000000.ethernet: MAC address is now 00:0a:35:b7:78:00
[    1.271437] xilinx_emaclite 81000000.ethernet: Xilinx EmacLite at 0x81000000 mapped to 0xD10A00007
[    1.386354] xilinx_ps2 81480000.ps2: Device Tree Probing 'ps2'
[    1.455652] xilinx_ps2 81480000.ps2: Xilinx PS2 at 0x81480000 mapped to 0xd1036000, irq=22
[    1.555028] xilinx_ps2 81481000.ps2: Device Tree Probing 'ps2'
[    1.624704] xilinx_ps2 81481000.ps2: Xilinx PS2 at 0x81481000 mapped to 0xd1038000, irq=23
[    1.725185] mousedev: PS/2 mouse device common for all mice
[    1.792535] i2c /dev entries driver
[    1.834242] Device Tree Probing 'i2c'
[    1.878524] xilinx-iic #0 at 0x81600000 mapped to 0xD10C0000, irq=18
[    1.956082] TCP cubic registered
[    1.993980] NET: Registered protocol family 17
[    2.790410] atkbd serio0: keyboard reset failed on xilinxps2/serio at 81480000
[    3.274683] RAMDISK: gzip image found at block 0
[    3.791700] atkbd serio1: Frame/parity error: 02
[    3.858598] input: AT Raw Set 2 keyboard as /devices/plb.0/xps-ps2.1/81481000.ps2/serio1/input/in0
[    4.234835] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    4.305005] Freeing unused kernel memory: 152k freed


Best regards,

Elvis Dowson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20120802/e5ea14ae/attachment.html>