[yocto] configuring WiFi in Yocto
James Abernathy
jfabernathy at gmail.com
Wed Aug 29 05:52:11 PDT 2012
On Wed, Aug 29, 2012 at 7:46 AM, Burton, Ross <ross.burton at intel.com> wrote:
> On 24 August 2012 19:36, Jim Abernathy <jfabernathy at gmail.com> wrote:
> > On 08/24/2012 02:23 PM, Ross Burton wrote:
> > See the linux-firmware packages. There are a few split out sub packages,
> and
> > then linux-firmware contains the rest.
> >
> > I see the rtl8192 firmware included in the linux-firmware recipe, but not
> > sure if there is a step to force a load of the firmware.
>
> Whoops, accidentally took this off-list by using my phone.
>
> If this is still broken, can you attach the output of dmesg, ifconfig
> and iwconfig on a fresh boot?
> ifconfig
>
I'm still having issues with WiFi.
iwconfig yields:
lo no wireless extensions
eth0 no wireless extensions
ifconfig yields:
eth0 Link encap:Ethernet HWaddr 00:22:4D:80:36:1F
inet addr:10.0.1.57 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::222:4dff:fe80:361f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34 errors:0 dropped:0 overruns:0 frame:0
TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6478 (6.3 KiB) TX bytes:9592 (9.3 KiB)
Interrupt:16 Memory:80400000-80420000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Finally, dmesg is below:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.32-yocto-standard (jim at jim-ubuntu-x64) (gcc version 4.6.4
20120303 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Aug 24 13:19:48 EDT 2012
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
BIOS-e820: 0000000000090000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ee95000 (usable)
BIOS-e820: 000000007ee95000 - 000000007eebf000 (reserved)
BIOS-e820: 000000007eebf000 - 000000007eefc000 (usable)
BIOS-e820: 000000007eefc000 - 000000007efbf000 (ACPI NVS)
BIOS-e820: 000000007efbf000 - 000000007efef000 (usable)
BIOS-e820: 000000007efef000 - 000000007efff000 (ACPI data)
BIOS-e820: 000000007efff000 - 000000007f000000 (usable)
BIOS-e820: 000000007f000000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.7 present.
DMI: /DN2800MT, BIOS MTCDT10N.86A.0156.2012.0612.1547 06/12/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7f000 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F000000 mask FFF000000 uncachable
2 base 0FFE00000 mask FFFE00000 write-protect
3 disabled
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00fbe40] fbe40
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
RAMDISK: 7e913000 - 7ee94000
Allocated new RAMDISK: 3727d000 - 377fd49d
Move RAMDISK from 000000007e913000 - 000000007ee9349c to 3727d000 - 377fd49c
ACPI: RSDP 000f2390 00024 (v02 INTEL )
ACPI: XSDT 7effe120 00064 (v01 INTEL DN2800MT 0000009C 01000013)
ACPI: FACP 7eff6000 000F4 (v03 INTEL DN2800MT 0000009C MSFT 0100000D)
ACPI: DSDT 7eff8000 05CA6 (v02 INTEL DN2800MT 0000009C MSFT 0100000D)
ACPI: FACS 7ef85000 00040
ACPI: SSDT 7eff7000 0043E (v01 INTEL DN2800MT 0000009C MSFT 0100000D)
ACPI: APIC 7eff5000 00084 (v02 INTEL DN2800MT 0000009C MSFT 0100000D)
ACPI: MCFG 7eff4000 0003C (v01 INTEL DN2800MT 0000009C MSFT 0100000D)
ACPI: HPET 7eff3000 00038 (v01 INTEL DN2800MT 0000009C MSFT 0100000D)
ACPI: SSDT 7eff1000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 7eff0000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 7efef000 0020F (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
1144MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x0000008f
0: 0x00000090 -> 0x0000009e
0: 0x00000100 -> 0x0007ee95
0: 0x0007eebf -> 0x0007eefc
0: 0x0007efbf -> 0x0007efef
0: 0x0007efff -> 0x0007f000
On node 0 totalpages: 519824
free_area_init_node: node 0, pgdat c1764d80, node_mem_map f629c200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2289 pages used for memmap
HighMem zone: 290324 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @f6264000 s23808 r0 d21248 u45056
pcpu-alloc: s23808 r0 d21248 u45056 alloc=11*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515759
Kernel command line: initrd=/initrd LABEL=boot root=/dev/ram0
console=ttyS0,115200 console=tty0 BOOT_IMAGE=/vmlinuz
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 8322816 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0007f000)
Memory: 2039596k/2080768k available (5160k kernel code, 39700k reserved,
2443k data, 500k init, 1170452k highmem)
virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc176d000 - 0xc17ea000 ( 500 kB)
.data : 0xc150a149 - 0xc176ce40 (2443 kB)
.text : 0xc1000000 - 0xc150a149 (5160 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=f540e000 soft=f5420000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1866.928 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
3733.85 BogoMIPS (lpj=7467712)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
ACPI: Core revision 20110413
ftrace: allocating 22266 entries in 44 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz stepping 01
Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU
driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f54ba000 soft=f54bc000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9a000
Initializing CPU#1
Disabled fast string operations
CPU 2 irqstacks, hard=f54c6000 soft=f54c8000
#2
smpboot cpu 2: start_ip = 9a000
Initializing CPU#2
Disabled fast string operations
CPU 3 irqstacks, hard=f54d2000 soft=f54d4000
#3 Ok.
smpboot cpu 3: start_ip = 9a000
Initializing CPU#3
Disabled fast string operations
Brought up 4 CPUs
Total of 4 processors activated (14933.91 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff]
(base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 7eebec18 002A7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002A7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 7eebde18 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0x7fffffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0bf2] type 0 class 0x000600
pci 0000:00:02.0: [8086:0be2] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0x80600000-0x806fffff]
pci 0000:00:02.0: reg 14: [io 0x40d0-0x40d7]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0x80800000-0x80803fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x40a0-0x40bf]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x4060-0x407f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0x4040-0x405f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0x80704400-0x807047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
pci 0000:00:1f.2: reg 14: [io 0x40dc-0x40df]
pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
pci 0000:00:1f.2: reg 1c: [io 0x40d8-0x40db]
pci 0000:00:1f.2: reg 20: [io 0x4020-0x402f]
pci 0000:00:1f.2: reg 24: [mem 0x80704000-0x807043ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
pci 0000:01:00.0: reg 10: [mem 0x80400000-0x8041ffff]
pci 0000:01:00.0: reg 14: [mem 0x80000000-0x803fffff]
pci 0000:01:00.0: reg 18: [io 0x3000-0x301f]
pci 0000:01:00.0: reg 1c: [mem 0x80420000-0x80423fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x804fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10ec:8176] type 0 class 0x000280
pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 18: [mem 0x80500000-0x80503fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0x80500000-0x805fffff]
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive
decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive
decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 f 1f
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000008f000 - 000000000008ffff
reserve RAM buffer: 000000000009e800 - 000000000009ffff
reserve RAM buffer: 000000007ee95000 - 000000007fffffff
reserve RAM buffer: 000000007eefc000 - 000000007fffffff
reserve RAM buffer: 000000007efef000 - 000000007fffffff
reserve RAM buffer: 000000007f000000 - 000000007fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x7f800000-0x7fffffff window]
pnp 00:00: [mem 0x80000000-0xfebfffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x0600-0x061f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x0600-0x061f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x06a0-0x06af]
pnp 00:06: [io 0x06b0-0x06ff]
system 00:06: [io 0x06a0-0x06af] has been reserved
system 00:06: [io 0x06b0-0x06ff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0070-0x0077]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0378-0x037f]
pnp 00:08: [irq 7]
pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:09: [io 0x02f8-0x02ff]
pnp 00:09: [irq 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0b: [mem 0x00000000-0x00003fff]
pnp 00:0b: [mem 0x00000000-0x00000fff]
pnp 00:0b: [mem 0x00000000-0x00000fff]
pnp 00:0b: [mem 0x00000000-0xffffffff disabled]
pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0x00000000-0x00003fff] could not be reserved
system 00:0b: [mem 0x00000000-0x00000fff] could not be reserved
system 00:0b: [mem 0x00000000-0x00000fff] could not be reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.3: BAR 9: assigned [mem 0x80900000-0x80afffff 64bit pref]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x80b00000-0x80cfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x804fffff]
pci 0000:00:1c.0: bridge window [mem 0x80b00000-0x80cfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0x80500000-0x805fffff]
pci 0000:00:1c.3: bridge window [mem 0x80900000-0x80afffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0x80000000-0x804fffff]
pci_bus 0000:01: resource 2 [mem 0x80b00000-0x80cfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x80500000-0x805fffff]
pci_bus 0000:02: resource 2 [mem 0x80900000-0x80afffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x000e0000-0x000effff]
pci_bus 0000:03: resource 9 [mem 0x000f0000-0x000fffff]
pci_bus 0000:03: resource 10 [mem 0x7f800000-0x7fffffff]
pci_bus 0000:03: resource 11 [mem 0x80000000-0xfebfffff]
pci_bus 0000:03: resource 12 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5636k freed
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1708
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.3: setting latency timer to 64
intel_idle: MWAIT substates: 0x3020220
intel_idle: does not run on family 6 model 54
input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024 at 0x80704000 port 0x80704100 irq 19
ata2: SATA max UDMA/133 abar m1024 at 0x80704000 port 0x80704180 irq 19
ata3: DUMMY
ata4: DUMMY
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:01:00.0: Disabling ASPM L0s
e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:01:00.0: setting latency timer to 64
e1000e 0000:01:00.0: (unregistered net_device): Failed to initialize MSI-X
interrupts. Falling back to MSI interrupts.
e1000e 0000:01:00.0: (unregistered net_device): Failed to initialize MSI
interrupts. Falling back to legacy interrupts.
e1000e 0000:01:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:80:36:1f
e1000e 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:01:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x80704400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Refined TSC clocksource calibration: 1866.732 MHz.
Switching to clocksource tsc
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
hda_codec: ALC888-VD: BIOS auto-probing.
ALSA device list:
#0: HDA Intel at 0x80800000 irq 22
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2012-08-29 12:44:16 UTC (1346244256)
pvrsrvkm 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pvrsrvkm 0000:00:02.0: setting latency timer to 64
[TTM] Zone kernel: Available graphics memory: 437390 kiB.
[TTM] Zone highmem: Available graphics memory: 1022616 kiB.
[TTM] Initializing pool allocator.
[drm:psb_driver_load] *ERROR* Enable MSI failed!
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
ACPI Warning: _BQC returned an invalid level (20110413/video-473)
ata2: SATA link down (SStatus 0 SControl 300)
acpi device:31: registered as cooling_device4
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
usb 1-5: new high speed USB device number 3 using ehci_hcd
scsi4 : usb-storage 1-5:1.0
Overlay GTT address is 7c0000
usb 1-8: new high speed USB device number 4 using ehci_hcd
hub 1-8:1.0: USB hub found
hub 1-8:1.0: 4 ports detected
usb 3-1: new full speed USB device number 2 using uhci_hcd
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
usb 1-8.3: new high speed USB device number 5 using ehci_hcd
scsi 4:0:0:0: Direct-Access OCZ ATV_TURBO 1100 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sda] No Caching mode page present
sd 4:0:0:0: [sda] Assuming drive cache: write through
sd 4:0:0:0: [sda] No Caching mode page present
sd 4:0:0:0: [sda] Assuming drive cache: write through
sda: sda4
sd 4:0:0:0: [sda] No Caching mode page present
sd 4:0:0:0: [sda] Assuming drive cache: write through
sd 4:0:0:0: [sda] Attached SCSI removable disk
usb 3-1.1: new full speed USB device number 3 using uhci_hcd
input: Dell Dell USB Keyboard Hub as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input4
generic-usb 0003:413C:2002.0001: input: USB HID v1.10 Keyboard [Dell Dell
USB Keyboard Hub] on usb-0000:00:1d.1-1.1/input0
input: Dell Dell USB Keyboard Hub as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input5
generic-usb 0003:413C:2002.0002: input: USB HID v1.10 Device [Dell Dell USB
Keyboard Hub] on usb-0000:00:1d.1-1.1/input1
usb 3-1.3: new low speed USB device number 4 using uhci_hcd
fbcon: psbfb (fb0) is primary device
input: Microsoft Microsoft Notebook Receiver v2.0 as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.3/3-1.3:1.0/input/input6
generic-usb 0003:045E:00E1.0003: input: USB HID v1.11 Mouse [Microsoft
Microsoft Notebook Receiver v2.0] on usb-0000:00:1d.1-1.3/input0
Console: switching to colour frame buffer device 170x48
fb0: psbfb frame buffer device
drm: registered panic notifier
Cedartrail: apply sample cache workaround
Device ID: 2
[drm] Initialized pvrsrvkm 8.1.0 2009-03-10 for 0000:00:02.0 on minor 0
Freeing unused kernel memory: 500k freed
udev[60]: starting version 164
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop0): using internal journal
EXT3-fs (loop0): mounted filesystem with ordered data mode
udev[502]: starting version 164
cfg80211: Calling CRDA to update world regulatory domain
rtl8192ce 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
rtl8192ce 0000:02:00.0: setting latency timer to 64
rtl8192ce:rtl92c_init_sw_vars():<0-0> Failed to request firmware!
rtlwifi:rtl_pci_probe():<0-0> Can't init_sw_vars.
rtl8192ce 0000:02:00.0: PCI INT A disabled
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
eth0: no IPv6 routers present
> Ross
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20120829/034d3fbb/attachment.html>
More information about the yocto
mailing list