[yocto] Poky 1.3_M3 branch does not work with linux-yocto 3.0 kernel ?

Saxena, Rahul rahul.saxena at intel.com
Fri Aug 31 11:06:57 PDT 2012


I have opened a issue in bugzilla for this (Bug# 3050)
Rahul

-----Original Message-----
From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com] 
Sent: Thursday, August 30, 2012 10:23 AM
To: Saxena, Rahul
Cc: Bodke, Kishore K; Bruce Ashfield; Hart, Darren; yocto at yoctoproject.org
Subject: Re: [yocto] Poky 1.3_M3 branch does not work with linux-yocto 3.0 kernel ?

On 12-08-30 01:06 AM, Saxena, Rahul wrote:
>
>
> -----Original Message-----
> From: yocto-bounces at yoctoproject.org 
> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Bodke, Kishore K
> Sent: Wednesday, August 29, 2012 11:08 AM
> To: Bruce Ashfield; Hart, Darren
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] Poky 1.3_M3 branch does not work with linux-yocto 3.0 kernel ?
>
>
>
>> -----Original Message-----
>> From: yocto-bounces at yoctoproject.org [mailto:yocto- 
>> bounces at yoctoproject.org] On Behalf Of Bruce Ashfield
>> Sent: Wednesday, August 29, 2012 10:47 AM
>> To: Hart, Darren
>> Cc: yocto at yoctoproject.org
>> Subject: Re: [yocto] Poky 1.3_M3 branch does not work with 
>> linux-yocto
>> 3.0 kernel ?
>>
>> On Tue, Aug 28, 2012 at 3:34 PM, Darren Hart<darren.hart at intel.com>  wrote:
>>> On 08/27/2012 08:18 PM, Bruce Ashfield wrote:
>>>> On 12-08-27 8:14 PM, Saxena, Rahul wrote:
>>>>> Hi,
>>>>>
>>>>> I am building a BSP (meta-cedartrail) using 1.3 M3 branch of Poky.
>>>>>
>>>>> When I try to boot a image such as core-image-sato, I get kernel 
>>>>> panic and errors such as:
>>>>>
>>>>> VFS: Cannot open root device "ram0" or unkown-block(0,0)
>>>>>
>>>>> Please append a correct "root=" boot option; here are the 
>>>>> available
>>>>>
>>>>> partitions:
>>>>>
>>>>> VFS: unable to mount root fs on unknown block(0,0)
>>>>>
>>>>> User configuration error - no valid rootfilesystem found
>>>>>
>>>>> I do see that the root file system exists in 
>>>>> cedartrail-poky-linux/core-image-sato-1.0-r0/rootfs dir..
>>>>>
>>>>> I did not see this problem when I uses a earlier commit of the 
>>>>> Poky master branch.
>>>>>
>>>>> It seems like something broke with 1.3 M3 branch that prevents a 
>>>>> proper build with 3.0 kernel. I do need to build my BSP with 3.0 kernel.
>>>>>
>>>>> (I was also told by Laurentiu Serban that 1.3 M3 Full Pass testing 
>>>>> does not include testing with the 3.0 kernel)
>>>>>
>>>>> Any suggestions would be most welcome. I do need to build my BSP 
>>>>> with the 3.0 kernel.
>>>>
>>>> Hmm. It should work, I booted one not that long ago. Can you force
>>>> qemux86 to prefer the 3.0 kernel and see if that boots ? That would 
>>>> at least start to isolate the potential problem areas.
>>>
>>> However, won't 3.0 be removed for the 1.3 release? Keeping with 3.4 
>>> and
>> 3.2?
>>
>> For 1.3 the 3 kernel sliding window plan was 3.4, 3.2 and 3.0 with
>> 2.6.37 being voted off the island. Or did you mean 1.4 ? Regardless, 
>> anything using 3.0 needs to be updated since it's time is running 
>> short! :)
>>
>
> Cedartrail BSP has PVR Graphics drivers which works only with 3.0 Kernel.
>
> Thanks
> Kishore.
>
>
> I am mainly interested in ensuring 3.0 Kernel works with the next 
> Yocto release (i.e. Yocto 1.3) since the CedarTrail BSP will work only with 3.0 Kernel due to a graphics driver dependency.
>

And that's all definitely fine. If we are having boot problems with the board on the kernel that it tags, then opening a defect so we can look into it is fine, since it is a supported kernel.

Bruce

> We will not port the Cedartrail BSP beyond Yocto 1.3.
>
> Thanks
> Rahul
>
>> Cheers,
>>
>> Bruce
>>
>>>
>>> --
>>> Darren
>>>
>>>>
>>>> Bruce
>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>> Rahul
>>>>>
>>>>
>>>
>>>
>>> --
>>> Darren Hart
>>> Intel Open Source Technology Center
>>> Yocto Project - Linux Kernel
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>>
>> --
>> "Thou shalt not follow the NULL pointer, for chaos and madness await 
>> thee at its end"
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto




More information about the yocto mailing list