[yocto] Beaglebone BSP for denzil?

[Rudolf Streif]

Typo correction: the BBone has an AM3359 CPU.
On Aug 31, 2012 6:44 PM, "Rudolf Streif" <rstreif at linuxfoundation.org>
wrote:

> Hey Scott,
>
> I am doing the same thing for a Linux Foundation class.
>
> The root filesystem that YP builds for the BBoard works just fine for the
> BBone. That's at least true for core-image-minimal. I tested that with the
> kernel that comes with the BBone.
>
> The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an
> AM3359 CPU.
>
> I built a kernel with YP from kernel.org some patches and a defconfig. My
> goal is to use linux-yocto so I started from scratch and did not use
> meta-ti. And it's educational too.
>
> I still used MLO and UBoot that came with the BBone. My next steps are to
> build the kernel using linux-yocto and then eventually also building UBoot
> with YP.
>
> I can give more info but right now I am just typing this on a mobile with
> no access to my dev box. I will follow up.
>
> Cheers,
> Rudi
> On Aug 31, 2012 4:11 PM, "Scott Garman" <scott.a.garman at intel.com> wrote:
>
>> Hello,
>>
>> Am I correct in understanding that the TI Beagleboard BSP from
>> yoctoproject.org should work with the Beaglebone, or do I need meta-ti?
>> I'm not looking for accelerated graphics or anything - this will just be
>> used in a classroom setting where there will be Beaglebones I'd like to
>> boot up to a minimal console image.
>>
>> I'll be doing this with the denzil release.
>>
>> Thanks,
>>
>> Scott
>>
>> --
>> Scott Garman
>> Embedded Linux Engineer - Yocto Project
>> Intel Open Source Technology Center
>> ______________________________**_________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20120831/47a20dbd/attachment.html>