[yocto] Beaglebone BSP for denzil?

[Rudolf Streif]

Yes, there were a lot of patches that I applied to the upstream kernel. It
worked but I do not think that they are all required. That's what I am
currently trying to figure out.
On Aug 31, 2012 8:03 PM, "Khem Raj" <raj.khem at gmail.com> wrote:

> On Fri, Aug 31, 2012 at 6:44 PM, Rudolf Streif
> <rstreif at linuxfoundation.org> wrote:
> > Hey Scott,
> >
> > I am doing the same thing for a Linux Foundation class.
> >
> > The root filesystem that YP builds for the BBoard works just fine for the
> > BBone. That's at least true for core-image-minimal. I tested that with
> the
> > kernel that comes with the BBone.
> >
> > The kernel does not work. The BBoard has an OMAP3 CPU the BBoard has an
> > AM3359 CPU.
> >
> > I built a kernel with YP from kernel.org some patches and a defconfig.
> My
> > goal is to use linux-yocto so I started from scratch and did not use
> > meta-ti. And it's educational too.
> >
> > I still used MLO and UBoot that came with the BBone. My next steps are to
> > build the kernel using linux-yocto and then eventually also building
> UBoot
> > with YP.
>
> you need to add the right .config and may be patches. But there are lot
> of patches see meta-ti for more details.
>
> >
> > I can give more info but right now I am just typing this on a mobile
> with no
> > access to my dev box. I will follow up.
> >
> > Cheers,
> > Rudi
> >
> > On Aug 31, 2012 4:11 PM, "Scott Garman" <scott.a.garman at intel.com>
> wrote:
> >>
> >> Hello,
> >>
> >> Am I correct in understanding that the TI Beagleboard BSP from
> >> yoctoproject.org should work with the Beaglebone, or do I need
> meta-ti? I'm
> >> not looking for accelerated graphics or anything - this will just be
> used in
> >> a classroom setting where there will be Beaglebones I'd like to boot up
> to a
> >> minimal console image.
> >>
> >> I'll be doing this with the denzil release.
> >>
> >> Thanks,
> >>
> >> Scott
> >>
> >> --
> >> Scott Garman
> >> Embedded Linux Engineer - Yocto Project
> >> Intel Open Source Technology Center
> >> _______________________________________________
> >> yocto mailing list
> >> yocto at yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/yocto
> >
> >
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20120831/1d818fb5/attachment.html>