[yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here

[Bryan Evenson]

> -----Original Message-----
> From: Zhang, Jessica [mailto:jessica.zhang at intel.com]
> Sent: Thursday, August 15, 2013 4:55 PM
> To: Bryan Evenson; yocto at yoctoproject.org
> Subject: RE: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF' undeclared here
> 
> Hi Bryan,
> 
> When you tried to setup your eclipse plugin, what is your toolchain and
> what
> is your sysroot.  Are they built by you or you download them?
> 

I built my own.  I'm using the meta-atmel layer located at https://github.com/evensonbryan/meta-atmel.git, using the instructions shown in the README to download and build.  Only exception is that I have MACHINE set as "at91sam9x5ek" in local.conf.  I did "bitbake core-image-minimal" as the initial build to start off everything; never tried to bitbake meta-ide-support on this system.

-Bryan

> - Jessica
> 
> -----Original Message-----
> From: yocto-bounces at yoctoproject.org [mailto:yocto-
> bounces at yoctoproject.org]
> On Behalf Of Bryan Evenson
> Sent: Tuesday, August 13, 2013 9:25 AM
> To: yocto at yoctoproject.org
> Subject: [yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF'
> undeclared here
> 
> I am working on installing and setting up the Eclipse IDE plug-in for
> Eclipse Juno.  I am using poky/dylan (at the yocto-1.4.1 tag) for my
> build
> environment.  I am to the "Configuring the Cross-Compiler Options"
> section
> from the current Yocto Project mega-manual, and after setting up the
> Toolchain Root Location and the Sysroot Location, I get the error
> 'Specified
> toolchain directory does not contain a toolchain generated with
> "bitbake
> meta-ide-support"'.  So, I went back and did "bitbake meta-ide-support"
> as
> requested and I am getting the following errors:
> 
> DEBUG: Executing shell function do_compile
> NOTE: make -j 2
>   CC    arm-linux-user/linux-user/syscall.o
> In file included from
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/syscall.c:3705:0:
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF' undeclared
> here
> (not in a function)
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF' undeclared
> here
> (not in a function)
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS' undeclared
> here
> (not in a function)
> make[1]: *** [linux-user/syscall.o] Error 1
> make: *** [subdir-arm-linux-user] Error 2
> make: *** Waiting for unfinished jobs....
> ERROR: oe_runmake failed
> ERROR: Function failed: do_compile (see
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/temp/lo
> g.do_compile.20276 for further information)
> 
> I did a search and I cannot find these defines anywhere in the i686
> sysroot
> directory, but it exists in my target's sysroot directory.  Is there
> something wrong with the i686 sysroot setup on my system?  If it
> matters,
> I'm doing the build machine is running Ubuntu 12.04.2 LTS.
> 
> Thanks,
> Bryan
> 
> 
> 
> 
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto