[yocto] adding all the pieces of WiFi to core-image-minimal
Chris Tapp
opensource at keylevel.com
Mon Jan 26 12:28:06 PST 2015
On 26 Jan 2015, at 19:31, James Abernathy <jfabernathy at outlook.com> wrote:
> I get a clean build when I add: CORE_IMAGE_EXTRA_INSTALL += " packagegroup-base-wifi”
>
> However, I have no wireless drivers. I must have to add something to add the drivers and firmware to the kernel. Not sure what though.
I'm not an expert here, but I think that adding kernel-modules and linux-firmware to your extra_install should give you what you need.
>
> Jim A
>
>> On Jan 26, 2015, at 11:09 AM, James Abernathy <jfabernathy at outlook.com> wrote:
>>
>>>
>>> On Jan 26, 2015, at 10:52 AM, Gary Thomas <gary at mlbassoc.com> wrote:
>>>
>>> On 2015-01-26 08:26, James Abernathy wrote:
>>>>
>>>>> On Jan 26, 2015, at 8:49 AM, Gary Thomas <gary at mlbassoc.com <mailto:gary at mlbassoc.com>> wrote:
>>>>>
>>>>> On 2015-01-26 06:29, James Abernathy wrote:
>>>>>>
>>>>>>> On Jan 23, 2015, at 12:37 PM, Gary Thomas <gary at mlbassoc.com <mailto:gary at mlbassoc.com>> wrote:
>>>>>>>
>>>>>>> On 2015-01-23 10:24, Jim Abernathy wrote:
>>>>>>>> I'm starting a project mostly for self-education. I have already done the project using Ubuntu Server 14.04 using a Intel NUC and a Pandaboard as targets. Now I want to see how
>>>>>>>> easy it is to move it to Yocto.
>>>>>>>>
>>>>>>>> Starting with the NUC, I can boot Dizzy 1.7.1 core-image-minimal and core-image-sato, both built with bitbake and not the prebuilt images. However, core-image-minimal doesn't have
>>>>>>>> WiFi and core-image-sato does, but I don't need all the GUI stuff. It's a headless application.
>>>>>>>>
>>>>>>>> So what is recommended; eliminating the GUI from sato or adding wifi and wpa-supplicant, etc to minimal?? Also any pointers to how to do the adding/subtracting would be most
>>>>>>>> helpful.
>>>>>>>>
>>>>>>>> Once this is working all I have to do is put apache-tomcat, and openjdk-7-jre, then my application.
>>>>>>>
>>>>>>> We use just iw & wpa-supplicant and set up the configuration
>>>>>>> files manually (e.g. the wpa-supplicant configurations).
>>>>>>
>>>>>> Could you help with a little more details. What I envision is adding an append statement of some kind to local.conf to load in the wireless related files to core-image-minimal,
>>>>>> same with openjdk-7-jre and tomcat7, but my first efforts have generated some unintelligible error for me. So that’s why I’m looking for direction on where to start with this.
>>>>>
>>>>> What was the error you got? I'll bet it was for 'iw' which
>>>>> is a package from meta-oe, so you'll need to add that layer
>>>>>
>>>>> Once you've added the meta-oe layer, you should be able to
>>>>> put this line in your local.conf:
>>>>> CORE_IMAGE_EXTRA_INSTALL += " iw wpa-supplicant”
>>>>>
>>>> Okay, what I don’t get is the fact that without any additional layers, bitbake core-image-sato builds all the WiFi features I need. bitbake core-image-minimal does not. So I’m
>>>> thinking that there is some CORE_IMAGE_EXTRA_INSTALL statement that can just add what is needed without extra layers.
>>>>
>>>> I guess it just doesn’t make sense to me right now.
>>>
>>> Try using
>>> CORE_IMAGE_EXTRA_INSTALL += " packagegroup-base-wifi"
>>> which will bring in 'wireless-tools' and 'wpa-supplicant'.
>>>
>>> I prefer 'iw' to 'wireless-tools' as it is newer and [IMO]
>>> simpler to use.
>>>
>> Thanks, I found that I can clean build with just the wpa-supplicant added and I’m hoping that will bring in the wifi drivers. If it does, all I want to do is edit the /etc/interfaces file with the Static IP of the wlan0, the static IP of the eth0 and the wpa-xxx for the WKPA2_PSK information.
>>
>> Do I really need the tools? I don’t need CLI commands to change any network parameters later.
>>
>> Jim A
>>
>>> --
>>> ------------------------------------------------------------
>>> Gary Thomas | Consulting for the
>>> MLB Associates | Embedded world
>>> ------------------------------------------------------------
>>> --
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>> --
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
--
Chris Tapp
opensource at keylevel.com
www.keylevel.com
----
You can tell you're getting older when your car insurance gets real cheap!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150126/d75a94f1/attachment.html>
More information about the yocto
mailing list