[yocto] QA Test Report for Yocto Project 2.0.3 rc6

Perez Carranza, Jose jose.perez.carranza at intel.com
Fri Dec 16 13:09:44 PST 2016


Hi

Here is the report for QA Cycle on 2.0.3 rc6

Full Report :  https://wiki.yoctoproject.org/wiki/WW50_-_2016-12-09_-_QA_Cycle_2.0.3.rc6

Summary

The QA cycle for 2.0.3 rc6 was completed, there were 4 new bugs found, One important issue related to ADT repo missing that was already triaged and the fix is under implementation, another issue that is not blocker related to parselogs that was already triaged and the solution is ongoing, two of the issues found were closed as won't fix due current NUC6  used to test is unsupported on versions before krogoth. There were also 4 bugs already found on newer releases that fix may be backported to jethro branch. In regards to performance measurements, is the first time that jethro branch is tested at GDC machines hence there is no previous data to compare with but in general all the values are in the same levels of the first measurements available for GDC machines that belongs to 2.1 M4 release.

Bugs

      * New
               - 10786 - Missing adt repo for 2.0.3 build [1]
             - 10791   - failed to add i915 component master [2]
             - 10808   - [Test Case 191] LSB Image does not boot on NUC6i5 [3] - WONTFIX
             - 10809   - usb 1-1.2: device descriptor read/all, error -110 [4] - WONTFIX

      * Found on newer releases that may need to be backported
- 7897  -  Dmesg error BAR 14 and BAR 15 failed to assign in Minnow Max [5]
               - 9120  -  The patch file is not applied to linux-yocto by yocto-kernel add patch command [6]
               - 9656  -  NFS boot failed due No working init found kernel panic on qemu [7]
               - 10281 -  Configuration variables: I can set a value for standard shell environment variable http_proxy          [8]

Performance

-        The is the first time that jethro branch was executed on GDC machines hence there is no previous data to compare, but compared to the first measurements present for current setup (2.1 M4) all the values are on the same levels

-        Charts can be found at  https://wiki.yoctoproject.org/charts/perf_milestone_GDC/performance_test.html

Links

1.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=10786

2.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=10791

3.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=10808

4.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=10809

5.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=7897

6.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=9120

7.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=9656

8.      https://bugzilla.yoctoproject.org/show_bug.cgi?id=10281



Regards,
José

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20161216/ac767271/attachment.html>


More information about the yocto mailing list