[yocto] [meta-selinux][PATCH] udev: Rename udev bbappend to eudev.
Mark Hatle
mark.hatle at windriver.com
Thu Mar 3 12:41:43 PST 2016
On 3/3/16 2:31 PM, Joe MacDonald wrote:
> [Re: [yocto] [meta-selinux][PATCH] udev: Rename udev bbappend to eudev.] On 16.03.02 (Wed 21:59) Philip Tricca wrote:
>
>> Not sure what to do with PR value in this case.
>
> Since it's a 'new' recipe, isn't this a case where we dump the PR
> entirely?
Yup, all new stuff any reference to PR goes away, unless there is a specific
reason to keep it.
--Mark
> -J.
>
>>
>> Philip
>>
>> On 03/02/2016 09:55 PM, Philip Tricca wrote:
>>> Required by switch to eudev in oe-core.
>>>
>>> Signed-off-by: Philip Tricca <flihp at twobit.us>
>>> ---
>>> recipes-core/eudev/eudev/init | 144 ++++++++++++++++++++++++++++++++
>>> recipes-core/eudev/eudev/udev-cache | 32 +++++++
>>> recipes-core/eudev/eudev_3.1.5.bbappend | 5 ++
>>> recipes-core/udev/udev/init | 144 --------------------------------
>>> recipes-core/udev/udev/udev-cache | 32 -------
>>> recipes-core/udev/udev_182.bbappend | 5 --
>>> 6 files changed, 181 insertions(+), 181 deletions(-)
>>> create mode 100644 recipes-core/eudev/eudev/init
>>> create mode 100644 recipes-core/eudev/eudev/udev-cache
>>> create mode 100644 recipes-core/eudev/eudev_3.1.5.bbappend
>>> delete mode 100644 recipes-core/udev/udev/init
>>> delete mode 100644 recipes-core/udev/udev/udev-cache
>>> delete mode 100644 recipes-core/udev/udev_182.bbappend
>>>
>>> diff --git a/recipes-core/eudev/eudev/init b/recipes-core/eudev/eudev/init
>>> new file mode 100644
>>> index 0000000..bb8b95b
>>> --- /dev/null
>>> +++ b/recipes-core/eudev/eudev/init
>>> @@ -0,0 +1,144 @@
>>> +#!/bin/sh
>>> +
>>> +### BEGIN INIT INFO
>>> +# Provides: udev
>>> +# Required-Start: mountvirtfs
>>> +# Required-Stop:
>>> +# Default-Start: S
>>> +# Default-Stop:
>>> +# Short-Description: Start udevd, populate /dev and load drivers.
>>> +### END INIT INFO
>>> +
>>> +export TZ=/etc/localtime
>>> +
>>> +[ -d /sys/class ] || exit 1
>>> +[ -r /proc/mounts ] || exit 1
>>> +[ -x @UDEVD@ ] || exit 1
>>> +if [ "$use_udev_cache" != "" ]; then
>>> + [ -f /etc/default/udev-cache ] && . /etc/default/udev-cache
>>> +fi
>>> +[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf
>>> +[ -f /etc/default/rcS ] && . /etc/default/rcS
>>> +
>>> +readfiles () {
>>> + READDATA=""
>>> + for filename in $@; do
>>> + if [ -r $filename ]; then
>>> + while read line; do
>>> + READDATA="$READDATA$line"
>>> + done < $filename
>>> + fi
>>> + done
>>> +}
>>> +
>>> +kill_udevd () {
>>> + pid=`pidof -x udevd`
>>> + [ -n "$pid" ] && kill $pid
>>> +}
>>> +
>>> +case "$1" in
>>> + start)
>>> + export ACTION=add
>>> + # propagate /dev from /sys
>>> + echo "Starting udev"
>>> +
>>> + # Check for requireed devtmpfs before trying to start udev and
>>> + # mount a no-existant fs.
>>> + if ! grep -q devtmpfs /proc/filesystems
>>> + then
>>> + echo "Missing devtmpfs, which is required for udev to run";
>>> + echo "Halting..."
>>> + halt
>>> + fi
>>> + # mount the devtmpfs on /dev, if not already done
>>> + LANG=C awk '$2 == "/dev" && ($3 == "devtmpfs") { exit 1 }' /proc/mounts && {
>>> + mount -n -o mode=0755 -t devtmpfs none "/dev"
>>> + }
>>> + [ -e /dev/pts ] || mkdir -m 0755 /dev/pts
>>> + [ -e /dev/shm ] || mkdir -m 1777 /dev/shm
>>> + # the automount rule for udev needs /tmp directory available, as /tmp is a symlink
>>> + # to /var/tmp which in turn is a symlink to /var/volatile/tmp, we need to make sure
>>> + # /var/volatile/tmp directory to be available.
>>> + mkdir -p /var/volatile/tmp
>>> +
>>> + # restorecon /run early to allow mdadm creating dir /run/mdadm
>>> + test ! -x /sbin/restorecon || /sbin/restorecon -F /run
>>> +
>>> + # Cache handling.
>>> + # A list of files which are used as a criteria to judge whether the udev cache could be reused.
>>> + CMP_FILE_LIST="/proc/version /proc/cmdline /proc/devices /proc/atags"
>>> + if [ "$use_udev_cache" != "" ]; then
>>> + if [ "$DEVCACHE" != "" ]; then
>>> + if [ -e $DEVCACHE ]; then
>>> + readfiles $CMP_FILE_LIST
>>> + NEWDATA="$READDATA"
>>> + readfiles /etc/udev/cache.data
>>> + OLDDATA="$READDATA"
>>> + if [ "$OLDDATA" = "$NEWDATA" ]; then
>>> + tar --directory=/ -xf $DEVCACHE > /dev/null 2>&1
>>> + not_first_boot=1
>>> + [ "$VERBOSE" != "no" ] && echo "udev: using cache file $DEVCACHE"
>>> + [ -e /dev/shm/udev.cache ] && rm -f /dev/shm/udev.cache
>>> + else
>>> + # Output detailed reason why the cached /dev is not used
>>> + if [ "$VERBOSE" != "no" ]; then
>>> + echo "udev: udev cache not used"
>>> + echo "udev: we use $CMP_FILE_LIST as criteria to judge whether the cache /dev could be resued"
>>> + echo "udev: olddata: $OLDDATA"
>>> + echo "udev: newdata: $NEWDATA"
>>> + fi
>>> + echo "$NEWDATA" > /dev/shm/udev.cache
>>> + fi
>>> + /usr/sbin/setenforce 1
>>> + else
>>> + if [ "$ROOTFS_READ_ONLY" != "yes" ]; then
>>> + # If rootfs is not read-only, it's possible that a new udev cache would be generated;
>>> + # otherwise, we do not bother to read files.
>>> + readfiles $CMP_FILE_LIST
>>> + echo "$READDATA" > /dev/shm/udev.cache
>>> + fi
>>> + fi
>>> + fi
>>> + fi
>>> +
>>> + # make_extra_nodes
>>> + kill_udevd > "/dev/null" 2>&1
>>> +
>>> + # trigger the sorted events
>>> + echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
>>> + @UDEVD@ -d
>>> +
>>> + udevadm control --env=STARTUP=1
>>> + if [ "$not_first_boot" != "" ];then
>>> + udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus --subsystem-nomatch=graphics --subsystem-nomatch=backlight --subsystem-nomatch=video4linux --subsystem-nomatch=platform
>>> + (udevadm settle --timeout=10; udevadm control --env=STARTUP=)&
>>> + else
>>> + udevadm trigger --action=add
>>> + udevadm settle
>>> + fi
>>> +
>>> + test ! -x /sbin/restorecon || /sbin/restorecon -F /dev /dev/shm /dev/pts
>>> +
>>> + ;;
>>> + stop)
>>> + echo "Stopping udevd"
>>> + start-stop-daemon --stop --name udevd --quiet
>>> + ;;
>>> + restart)
>>> + $0 stop
>>> + sleep 1
>>> + $0 start
>>> + ;;
>>> + status)
>>> + pid=`pidof -x udevd`
>>> + if [ -n "$pid" ]; then
>>> + echo "udevd (pid $pid) is running ..."
>>> + else
>>> + echo "udevd is stopped"
>>> + fi
>>> + ;;
>>> + *)
>>> + echo "Usage: $0 {start|stop|status|restart}"
>>> + exit 1
>>> +esac
>>> +exit 0
>>> diff --git a/recipes-core/eudev/eudev/udev-cache b/recipes-core/eudev/eudev/udev-cache
>>> new file mode 100644
>>> index 0000000..6898577
>>> --- /dev/null
>>> +++ b/recipes-core/eudev/eudev/udev-cache
>>> @@ -0,0 +1,32 @@
>>> +#!/bin/sh -e
>>> +
>>> +### BEGIN INIT INFO
>>> +# Provides: udev-cache
>>> +# Required-Start: mountall
>>> +# Required-Stop:
>>> +# Default-Start: S
>>> +# Default-Stop:
>>> +# Short-Description: cache /dev to speedup the udev next boot
>>> +### END INIT INFO
>>> +
>>> +export TZ=/etc/localtime
>>> +
>>> +[ -r /proc/mounts ] || exit 1
>>> +[ -x @UDEVD@ ] || exit 1
>>> +[ -d /sys/class ] || exit 1
>>> +
>>> +[ -f /etc/default/rcS ] && . /etc/default/rcS
>>> +[ -f /etc/default/udev-cache ] && . /etc/default/udev-cache
>>> +
>>> +if [ "$ROOTFS_READ_ONLY" = "yes" ]; then
>>> + [ "$VERBOSE" != "no" ] && echo "udev-cache: read-only rootfs, skip generating udev-cache"
>>> + exit 0
>>> +fi
>>> +
>>> +if [ "$DEVCACHE" != "" -a -e /dev/shm/udev.cache ]; then
>>> + echo "Populating dev cache"
>>> + tar --directory=/ --selinux --xattrs -cf "$DEVCACHE" dev
>>> + mv /dev/shm/udev.cache /etc/udev/cache.data
>>> +fi
>>> +
>>> +exit 0
>>> diff --git a/recipes-core/eudev/eudev_3.1.5.bbappend b/recipes-core/eudev/eudev_3.1.5.bbappend
>>> new file mode 100644
>>> index 0000000..e87af0b
>>> --- /dev/null
>>> +++ b/recipes-core/eudev/eudev_3.1.5.bbappend
>>> @@ -0,0 +1,5 @@
>>> +PR .= ".4"
>>> +
>>> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> +
>>> +inherit enable-selinux
>>> diff --git a/recipes-core/udev/udev/init b/recipes-core/udev/udev/init
>>> deleted file mode 100644
>>> index bb8b95b..0000000
>>> --- a/recipes-core/udev/udev/init
>>> +++ /dev/null
>>> @@ -1,144 +0,0 @@
>>> -#!/bin/sh
>>> -
>>> -### BEGIN INIT INFO
>>> -# Provides: udev
>>> -# Required-Start: mountvirtfs
>>> -# Required-Stop:
>>> -# Default-Start: S
>>> -# Default-Stop:
>>> -# Short-Description: Start udevd, populate /dev and load drivers.
>>> -### END INIT INFO
>>> -
>>> -export TZ=/etc/localtime
>>> -
>>> -[ -d /sys/class ] || exit 1
>>> -[ -r /proc/mounts ] || exit 1
>>> -[ -x @UDEVD@ ] || exit 1
>>> -if [ "$use_udev_cache" != "" ]; then
>>> - [ -f /etc/default/udev-cache ] && . /etc/default/udev-cache
>>> -fi
>>> -[ -f /etc/udev/udev.conf ] && . /etc/udev/udev.conf
>>> -[ -f /etc/default/rcS ] && . /etc/default/rcS
>>> -
>>> -readfiles () {
>>> - READDATA=""
>>> - for filename in $@; do
>>> - if [ -r $filename ]; then
>>> - while read line; do
>>> - READDATA="$READDATA$line"
>>> - done < $filename
>>> - fi
>>> - done
>>> -}
>>> -
>>> -kill_udevd () {
>>> - pid=`pidof -x udevd`
>>> - [ -n "$pid" ] && kill $pid
>>> -}
>>> -
>>> -case "$1" in
>>> - start)
>>> - export ACTION=add
>>> - # propagate /dev from /sys
>>> - echo "Starting udev"
>>> -
>>> - # Check for requireed devtmpfs before trying to start udev and
>>> - # mount a no-existant fs.
>>> - if ! grep -q devtmpfs /proc/filesystems
>>> - then
>>> - echo "Missing devtmpfs, which is required for udev to run";
>>> - echo "Halting..."
>>> - halt
>>> - fi
>>> - # mount the devtmpfs on /dev, if not already done
>>> - LANG=C awk '$2 == "/dev" && ($3 == "devtmpfs") { exit 1 }' /proc/mounts && {
>>> - mount -n -o mode=0755 -t devtmpfs none "/dev"
>>> - }
>>> - [ -e /dev/pts ] || mkdir -m 0755 /dev/pts
>>> - [ -e /dev/shm ] || mkdir -m 1777 /dev/shm
>>> - # the automount rule for udev needs /tmp directory available, as /tmp is a symlink
>>> - # to /var/tmp which in turn is a symlink to /var/volatile/tmp, we need to make sure
>>> - # /var/volatile/tmp directory to be available.
>>> - mkdir -p /var/volatile/tmp
>>> -
>>> - # restorecon /run early to allow mdadm creating dir /run/mdadm
>>> - test ! -x /sbin/restorecon || /sbin/restorecon -F /run
>>> -
>>> - # Cache handling.
>>> - # A list of files which are used as a criteria to judge whether the udev cache could be reused.
>>> - CMP_FILE_LIST="/proc/version /proc/cmdline /proc/devices /proc/atags"
>>> - if [ "$use_udev_cache" != "" ]; then
>>> - if [ "$DEVCACHE" != "" ]; then
>>> - if [ -e $DEVCACHE ]; then
>>> - readfiles $CMP_FILE_LIST
>>> - NEWDATA="$READDATA"
>>> - readfiles /etc/udev/cache.data
>>> - OLDDATA="$READDATA"
>>> - if [ "$OLDDATA" = "$NEWDATA" ]; then
>>> - tar --directory=/ -xf $DEVCACHE > /dev/null 2>&1
>>> - not_first_boot=1
>>> - [ "$VERBOSE" != "no" ] && echo "udev: using cache file $DEVCACHE"
>>> - [ -e /dev/shm/udev.cache ] && rm -f /dev/shm/udev.cache
>>> - else
>>> - # Output detailed reason why the cached /dev is not used
>>> - if [ "$VERBOSE" != "no" ]; then
>>> - echo "udev: udev cache not used"
>>> - echo "udev: we use $CMP_FILE_LIST as criteria to judge whether the cache /dev could be resued"
>>> - echo "udev: olddata: $OLDDATA"
>>> - echo "udev: newdata: $NEWDATA"
>>> - fi
>>> - echo "$NEWDATA" > /dev/shm/udev.cache
>>> - fi
>>> - /usr/sbin/setenforce 1
>>> - else
>>> - if [ "$ROOTFS_READ_ONLY" != "yes" ]; then
>>> - # If rootfs is not read-only, it's possible that a new udev cache would be generated;
>>> - # otherwise, we do not bother to read files.
>>> - readfiles $CMP_FILE_LIST
>>> - echo "$READDATA" > /dev/shm/udev.cache
>>> - fi
>>> - fi
>>> - fi
>>> - fi
>>> -
>>> - # make_extra_nodes
>>> - kill_udevd > "/dev/null" 2>&1
>>> -
>>> - # trigger the sorted events
>>> - echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
>>> - @UDEVD@ -d
>>> -
>>> - udevadm control --env=STARTUP=1
>>> - if [ "$not_first_boot" != "" ];then
>>> - udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=mem --subsystem-nomatch=vc --subsystem-nomatch=vtconsole --subsystem-nomatch=misc --subsystem-nomatch=dcon --subsystem-nomatch=pci_bus --subsystem-nomatch=graphics --subsystem-nomatch=backlight --subsystem-nomatch=video4linux --subsystem-nomatch=platform
>>> - (udevadm settle --timeout=10; udevadm control --env=STARTUP=)&
>>> - else
>>> - udevadm trigger --action=add
>>> - udevadm settle
>>> - fi
>>> -
>>> - test ! -x /sbin/restorecon || /sbin/restorecon -F /dev /dev/shm /dev/pts
>>> -
>>> - ;;
>>> - stop)
>>> - echo "Stopping udevd"
>>> - start-stop-daemon --stop --name udevd --quiet
>>> - ;;
>>> - restart)
>>> - $0 stop
>>> - sleep 1
>>> - $0 start
>>> - ;;
>>> - status)
>>> - pid=`pidof -x udevd`
>>> - if [ -n "$pid" ]; then
>>> - echo "udevd (pid $pid) is running ..."
>>> - else
>>> - echo "udevd is stopped"
>>> - fi
>>> - ;;
>>> - *)
>>> - echo "Usage: $0 {start|stop|status|restart}"
>>> - exit 1
>>> -esac
>>> -exit 0
>>> diff --git a/recipes-core/udev/udev/udev-cache b/recipes-core/udev/udev/udev-cache
>>> deleted file mode 100644
>>> index 6898577..0000000
>>> --- a/recipes-core/udev/udev/udev-cache
>>> +++ /dev/null
>>> @@ -1,32 +0,0 @@
>>> -#!/bin/sh -e
>>> -
>>> -### BEGIN INIT INFO
>>> -# Provides: udev-cache
>>> -# Required-Start: mountall
>>> -# Required-Stop:
>>> -# Default-Start: S
>>> -# Default-Stop:
>>> -# Short-Description: cache /dev to speedup the udev next boot
>>> -### END INIT INFO
>>> -
>>> -export TZ=/etc/localtime
>>> -
>>> -[ -r /proc/mounts ] || exit 1
>>> -[ -x @UDEVD@ ] || exit 1
>>> -[ -d /sys/class ] || exit 1
>>> -
>>> -[ -f /etc/default/rcS ] && . /etc/default/rcS
>>> -[ -f /etc/default/udev-cache ] && . /etc/default/udev-cache
>>> -
>>> -if [ "$ROOTFS_READ_ONLY" = "yes" ]; then
>>> - [ "$VERBOSE" != "no" ] && echo "udev-cache: read-only rootfs, skip generating udev-cache"
>>> - exit 0
>>> -fi
>>> -
>>> -if [ "$DEVCACHE" != "" -a -e /dev/shm/udev.cache ]; then
>>> - echo "Populating dev cache"
>>> - tar --directory=/ --selinux --xattrs -cf "$DEVCACHE" dev
>>> - mv /dev/shm/udev.cache /etc/udev/cache.data
>>> -fi
>>> -
>>> -exit 0
>>> diff --git a/recipes-core/udev/udev_182.bbappend b/recipes-core/udev/udev_182.bbappend
>>> deleted file mode 100644
>>> index 6f8f049..0000000
>>> --- a/recipes-core/udev/udev_182.bbappend
>>> +++ /dev/null
>>> @@ -1,5 +0,0 @@
>>> -PR .= ".4"
>>> -
>>> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
>>> -
>>> -inherit with-selinux
>>>
>>
More information about the yocto
mailing list