[yocto] [meta-raspberrypi][PATCH v2 5/5] linux-raspberrypi: Drop support for 3.14
Petter Mabäcker
petter at technux.se
Wed Mar 30 07:35:49 PDT 2016
General policy is to support three kernel versions; latest stable + two
longterm versions. These are currently 4.4, 4.1, and 3.18.
Signed-off-by: Petter Mabäcker <petter at technux.se>
---
.../0001-ASoC-Add-BCM2708-fixes.patch | 263 ---------------------
...ng-lock-from-atomic-context-in-i2c-driver.patch | 235 ------------------
recipes-kernel/linux/linux-raspberrypi_3.14.bb | 11 -
3 files changed, 509 deletions(-)
delete mode 100644 recipes-kernel/linux/linux-raspberrypi-3.14/0001-ASoC-Add-BCM2708-fixes.patch
delete mode 100644 recipes-kernel/linux/linux-raspberrypi-3.14/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch
delete mode 100644 recipes-kernel/linux/linux-raspberrypi_3.14.bb
diff --git a/recipes-kernel/linux/linux-raspberrypi-3.14/0001-ASoC-Add-BCM2708-fixes.patch b/recipes-kernel/linux/linux-raspberrypi-3.14/0001-ASoC-Add-BCM2708-fixes.patch
deleted file mode 100644
index 26c71b8..0000000
--- a/recipes-kernel/linux/linux-raspberrypi-3.14/0001-ASoC-Add-BCM2708-fixes.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From e73a69601c65103b0e032e6093af0f00a1e1af3a Mon Sep 17 00:00:00 2001
-From: Florian Meier <florian.meier at koalo.de>
-Date: Fri, 22 Nov 2013 14:33:38 +0100
-Subject: [PATCH 1/2] ASoC: Add BCM2708 fixes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-(cherry-pick remaining parts of
-730cb8a1216f9da3d097072cd9bb06e0db348172)
-
-bcm2708-i2s: Update bclk_ratio to more correct values
-
-Move GPIO setup to hw_params.
-
-This is used to stop the I2S driver from breaking
-the GPIO setup for other uses of the PCM interface
-
-Configure GPIOs for I2S based on revision/card settings
-
-With RPi model B+, assignment of the I2S GPIO pins has changed.
-This patch uses the board revision to auto-detect the GPIOs used
-for I2S. It also allows sound card drivers to set the GPIOs that
-should be used. This is especially important with the Compute
-Module.
-
-bcm2708-i2s: Avoid leak from iomap when accessing gpio
-
-bcm2708: Eliminate i2s debugfs directory error
-
-Qualify the two regmap ranges uses by bcm2708-i2s ('-i2s' and '-clk')
-to avoid the name clash when registering debugfs entries.
-
-Upstream-Status: Pending
-
-Signed-off-by: Petter Mabäcker <petter at technux.se>
-
-Conflicts:
- sound/soc/bcm/Kconfig
- sound/soc/bcm/Makefile
- sound/soc/bcm/bcm2708-i2s.c
----
- sound/soc/bcm/bcm2708-i2s.c | 82 ++++++++++++++++++++++++++++++++++++---------
- sound/soc/bcm/bcm2708-i2s.h | 35 +++++++++++++++++++
- 2 files changed, 102 insertions(+), 15 deletions(-)
- create mode 100644 sound/soc/bcm/bcm2708-i2s.h
-
-diff --git a/sound/soc/bcm/bcm2708-i2s.c b/sound/soc/bcm/bcm2708-i2s.c
-index 9976571..3fcb740 100644
---- a/sound/soc/bcm/bcm2708-i2s.c
-+++ b/sound/soc/bcm/bcm2708-i2s.c
-@@ -31,6 +31,8 @@
- * General Public License for more details.
- */
-
-+#include "bcm2708-i2s.h"
-+
- #include <linux/init.h>
- #include <linux/module.h>
- #include <linux/device.h>
-@@ -38,6 +40,7 @@
- #include <linux/delay.h>
- #include <linux/io.h>
- #include <linux/clk.h>
-+#include <mach/gpio.h>
-
- #include <sound/core.h>
- #include <sound/pcm.h>
-@@ -46,6 +49,8 @@
- #include <sound/soc.h>
- #include <sound/dmaengine_pcm.h>
-
-+#include <asm/system_info.h>
-+
- /* Clock registers */
- #define BCM2708_CLK_PCMCTL_REG 0x00
- #define BCM2708_CLK_PCMDIV_REG 0x04
-@@ -163,6 +168,9 @@ static const unsigned int bcm2708_clk_freq[BCM2708_CLK_SRC_HDMI+1] = {
- #define BCM2708_DMA_DREQ_PCM_TX 2
- #define BCM2708_DMA_DREQ_PCM_RX 3
-
-+/* I2S pin configuration */
-+static int bcm2708_i2s_gpio=BCM2708_I2S_GPIO_AUTO;
-+
- /* General device struct */
- struct bcm2708_i2s_dev {
- struct device *dev;
-@@ -174,6 +182,12 @@ struct bcm2708_i2s_dev {
- struct regmap *clk_regmap;
- };
-
-+void bcm2708_i2s_set_gpio(int gpio) {
-+ bcm2708_i2s_gpio=gpio;
-+}
-+EXPORT_SYMBOL(bcm2708_i2s_set_gpio);
-+
-+
- static void bcm2708_i2s_start_clock(struct bcm2708_i2s_dev *dev)
- {
- /* Start the clock if in master mode */
-@@ -306,6 +320,25 @@ static int bcm2708_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
- }
-
-
-+static int bcm2708_i2s_set_function(unsigned offset, int function)
-+{
-+ #define GPIOFSEL(x) (0x00+(x)*4)
-+ void __iomem *gpio = __io_address(GPIO_BASE);
-+ unsigned alt = function <= 3 ? function + 4: function == 4 ? 3 : 2;
-+ unsigned gpiodir;
-+ unsigned gpio_bank = offset / 10;
-+ unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
-+
-+ if (offset >= BCM2708_NR_GPIOS)
-+ return -EINVAL;
-+
-+ gpiodir = readl(gpio + GPIOFSEL(gpio_bank));
-+ gpiodir &= ~(7 << gpio_field_offset);
-+ gpiodir |= alt << gpio_field_offset;
-+ writel(gpiodir, gpio + GPIOFSEL(gpio_bank));
-+ return 0;
-+}
-+
- static void bcm2708_i2s_setup_gpio(void)
- {
- /*
-@@ -314,20 +347,37 @@ static void bcm2708_i2s_setup_gpio(void)
- * TODO Better way would be to handle
- * this in the device tree!
- */
--#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
--#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
-+ int pin,pinconfig,startpin,alt;
-+
-+ /* SPI is on different GPIOs on different boards */
-+ /* for Raspberry Pi B+, this is pin GPIO18-21, for original on 28-31 */
-+ if (bcm2708_i2s_gpio==BCM2708_I2S_GPIO_AUTO) {
-+ if ((system_rev & 0xffffff) >= 0x10) {
-+ /* Model B+ */
-+ pinconfig=BCM2708_I2S_GPIO_PIN18;
-+ } else {
-+ /* original */
-+ pinconfig=BCM2708_I2S_GPIO_PIN28;
-+ }
-+ } else {
-+ pinconfig=bcm2708_i2s_gpio;
-+ }
-
-- unsigned int *gpio;
-- int pin;
-- gpio = ioremap(GPIO_BASE, SZ_16K);
-+ if (pinconfig==BCM2708_I2S_GPIO_PIN18) {
-+ startpin=18;
-+ alt=BCM2708_I2S_GPIO_PIN18_ALT;
-+ } else if (pinconfig==BCM2708_I2S_GPIO_PIN28) {
-+ startpin=28;
-+ alt=BCM2708_I2S_GPIO_PIN28_ALT;
-+ } else {
-+ printk(KERN_INFO "Can't configure I2S GPIOs, unknown pin mode for I2S: %i\n",pinconfig);
-+ return;
-+ }
-
-- /* SPI is on GPIO 7..11 */
-- for (pin = 28; pin <= 31; pin++) {
-- INP_GPIO(pin); /* set mode to GPIO input first */
-- SET_GPIO_ALT(pin, 2); /* set mode to ALT 0 */
-+ /* configure I2S pins to correct ALT mode */
-+ for (pin = startpin; pin <= startpin+3; pin++) {
-+ bcm2708_i2s_set_function(pin, alt);
- }
--#undef INP_GPIO
--#undef SET_GPIO_ALT
- }
-
- static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
-@@ -372,15 +422,15 @@ static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- data_length = 16;
-- bclk_ratio = 40;
-+ bclk_ratio = 50;
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- data_length = 24;
-- bclk_ratio = 40;
-+ bclk_ratio = 50;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- data_length = 32;
-- bclk_ratio = 80;
-+ bclk_ratio = 100;
- break;
- default:
- return -EINVAL;
-@@ -746,7 +796,7 @@ static struct snd_soc_dai_driver bcm2708_i2s_dai = {
- .channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE
-- // | SNDRV_PCM_FMTBIT_S24_LE : disable for now, it causes white noise with xbmc
-+ | SNDRV_PCM_FMTBIT_S24_LE
- | SNDRV_PCM_FMTBIT_S32_LE
- },
- .capture = {
-@@ -803,6 +853,7 @@ static const struct regmap_config bcm2708_regmap_config[] = {
- .precious_reg = bcm2708_i2s_precious_reg,
- .volatile_reg = bcm2708_i2s_volatile_reg,
- .cache_type = REGCACHE_RBTREE,
-+ .name = "i2s",
- },
- {
- .reg_bits = 32,
-@@ -811,6 +862,7 @@ static const struct regmap_config bcm2708_regmap_config[] = {
- .max_register = BCM2708_CLK_PCMDIV_REG,
- .volatile_reg = bcm2708_clk_volatile_reg,
- .cache_type = REGCACHE_RBTREE,
-+ .name = "clk",
- },
- };
-
-diff --git a/sound/soc/bcm/bcm2708-i2s.h b/sound/soc/bcm/bcm2708-i2s.h
-new file mode 100644
-index 0000000..94fed6a
---- /dev/null
-+++ b/sound/soc/bcm/bcm2708-i2s.h
-@@ -0,0 +1,35 @@
-+/*
-+ * I2S configuration for sound cards.
-+ *
-+ * Copyright (c) 2014 Daniel Matuschek <daniel at hifiberry.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef BCM2708_I2S_H
-+#define BCM2708_I2S_H
-+
-+/* I2S pin assignment */
-+#define BCM2708_I2S_GPIO_AUTO 0
-+#define BCM2708_I2S_GPIO_PIN18 1
-+#define BCM2708_I2S_GPIO_PIN28 2
-+
-+/* Alt mode to enable I2S */
-+#define BCM2708_I2S_GPIO_PIN18_ALT 0
-+#define BCM2708_I2S_GPIO_PIN28_ALT 2
-+
-+extern void bcm2708_i2s_set_gpio(int gpio);
-+
-+#endif
---
-1.9.1
-
diff --git a/recipes-kernel/linux/linux-raspberrypi-3.14/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch b/recipes-kernel/linux/linux-raspberrypi-3.14/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch
deleted file mode 100644
index 907ed7b..0000000
--- a/recipes-kernel/linux/linux-raspberrypi-3.14/0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch
+++ /dev/null
@@ -1,235 +0,0 @@
-From 2c84355bf200f4d19d7078dee2c63011ad715395 Mon Sep 17 00:00:00 2001
-From: jeanleflambeur <catalin.vasile at gmail.com>
-Date: Sun, 1 Feb 2015 12:35:38 +0100
-Subject: [PATCH 2/2] Fix grabbing lock from atomic context in i2c driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-(cherry-pick from 558d0bfc8fe80ccdccee7f03e881a80965ec987c)
-
-2 main changes:
-- check for timeouts in the bcm2708_bsc_setup function as indicated by this comment:
- /* poll for transfer start bit (should only take 1-20 polls) */
- This implies that the setup function can now fail so account for this everywhere it's called
-- Removed the clk_get_rate call from inside the setup function as it locks a mutex and that's not ok since we call it from under a spin lock.
-
-removed dead code and update comment
-
-fixed typo in comment
-
-Upstream-Status: Pending
-
-Signed-off-by: Petter Mabäcker <petter at technux.se>
-
-Conflicts:
- drivers/i2c/busses/i2c-bcm2708.c
----
- drivers/i2c/busses/i2c-bcm2708.c | 88 +++++++++++++++++++++++++++++-----------
- 1 file changed, 65 insertions(+), 23 deletions(-)
-
-diff --git a/drivers/i2c/busses/i2c-bcm2708.c b/drivers/i2c/busses/i2c-bcm2708.c
-index 05531db..886672c 100644
---- a/drivers/i2c/busses/i2c-bcm2708.c
-+++ b/drivers/i2c/busses/i2c-bcm2708.c
-@@ -67,6 +67,7 @@
- #define BSC_S_TA 0x00000001
-
- #define I2C_TIMEOUT_MS 150
-+#define I2C_WAIT_LOOP_COUNT 40
-
- #define DRV_NAME "bcm2708_i2c"
-
-@@ -85,6 +86,7 @@ struct bcm2708_i2c {
- void __iomem *base;
- int irq;
- struct clk *clk;
-+ u32 cdiv;
-
- struct completion done;
-
-@@ -108,10 +110,10 @@ static void bcm2708_i2c_init_pinmode(int id)
- int pin;
- u32 *gpio = ioremap(0x20200000, SZ_16K);
-
-- BUG_ON(id != 0 && id != 1);
-+ BUG_ON(id != 0 && id != 1);
- /* BSC0 is on GPIO 0 & 1, BSC1 is on GPIO 2 & 3 */
- for (pin = id*2+0; pin <= id*2+1; pin++) {
--printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
-+ printk("bcm2708_i2c_init_pinmode(%d,%d)\n", id, pin);
- INP_GPIO(pin); /* set mode to GPIO input first */
- SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */
- }
-@@ -150,16 +152,16 @@ static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
- bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
- }
-
--static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
-+static inline int bcm2708_bsc_setup(struct bcm2708_i2c *bi)
- {
-- unsigned long bus_hz;
- u32 cdiv, s;
- u32 c = BSC_C_I2CEN | BSC_C_INTD | BSC_C_ST | BSC_C_CLEAR_1;
-+ int wait_loops = I2C_WAIT_LOOP_COUNT;
-
-- bus_hz = clk_get_rate(bi->clk);
-- cdiv = bus_hz / baudrate;
-- if (cdiv > 0xffff)
-- cdiv = 0xffff;
-+ /* Can't call clk_get_rate as it locks a mutex and here we are spinlocked.
-+ * Use the value that we cached in the probe.
-+ */
-+ cdiv = bi->cdiv;
-
- if (bi->msg->flags & I2C_M_RD)
- c |= BSC_C_INTR | BSC_C_READ;
-@@ -176,17 +178,25 @@ static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
- - Both messages to same slave address
- - Write message can fit inside FIFO (16 bytes or less) */
- if ( (bi->nmsgs > 1) &&
-- !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
-- (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
-+ !(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
-+ (bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
- /* Fill FIFO with entire write message (16 byte FIFO) */
-- while (bi->pos < bi->msg->len)
-+ while (bi->pos < bi->msg->len) {
- bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
-+ }
- /* Start write transfer (no interrupts, don't clear FIFO) */
- bcm2708_wr(bi, BSC_C, BSC_C_I2CEN | BSC_C_ST);
-+
- /* poll for transfer start bit (should only take 1-20 polls) */
- do {
- s = bcm2708_rd(bi, BSC_S);
-- } while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)));
-+ } while (!(s & (BSC_S_TA | BSC_S_ERR | BSC_S_CLKT | BSC_S_DONE)) && --wait_loops >= 0);
-+
-+ /* did we time out or some error occured? */
-+ if (wait_loops < 0 || (s & (BSC_S_ERR | BSC_S_CLKT))) {
-+ return -1;
-+ }
-+
- /* Send next read message before the write transfer finishes. */
- bi->nmsgs--;
- bi->msg++;
-@@ -196,6 +206,8 @@ static inline void bcm2708_bsc_setup(struct bcm2708_i2c *bi)
- }
- }
- bcm2708_wr(bi, BSC_C, c);
-+
-+ return 0;
- }
-
- static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
-@@ -203,13 +215,15 @@ static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
- struct bcm2708_i2c *bi = dev_id;
- bool handled = true;
- u32 s;
-+ int ret;
-
- spin_lock(&bi->lock);
-
- /* we may see camera interrupts on the "other" I2C channel
-- Just return if we've not sent anything */
-- if (!bi->nmsgs || !bi->msg )
-+ Just return if we've not sent anything */
-+ if (!bi->nmsgs || !bi->msg) {
- goto early_exit;
-+ }
-
- s = bcm2708_rd(bi, BSC_S);
-
-@@ -217,13 +231,16 @@ static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
- bcm2708_bsc_reset(bi);
- bi->error = true;
-
-+ bi->msg = 0; /* to inform the that all work is done */
-+ bi->nmsgs = 0;
- /* wake up our bh */
- complete(&bi->done);
- } else if (s & BSC_S_DONE) {
- bi->nmsgs--;
-
-- if (bi->msg->flags & I2C_M_RD)
-+ if (bi->msg->flags & I2C_M_RD) {
- bcm2708_bsc_fifo_drain(bi);
-+ }
-
- bcm2708_bsc_reset(bi);
-
-@@ -231,8 +248,19 @@ static irqreturn_t bcm2708_i2c_interrupt(int irq, void *dev_id)
- /* advance to next message */
- bi->msg++;
- bi->pos = 0;
-- bcm2708_bsc_setup(bi);
-+ ret = bcm2708_bsc_setup(bi);
-+ if (ret < 0) {
-+ bcm2708_bsc_reset(bi);
-+ bi->error = true;
-+ bi->msg = 0; /* to inform the that all work is done */
-+ bi->nmsgs = 0;
-+ /* wake up our bh */
-+ complete(&bi->done);
-+ goto early_exit;
-+ }
- } else {
-+ bi->msg = 0; /* to inform the that all work is done */
-+ bi->nmsgs = 0;
- /* wake up our bh */
- complete(&bi->done);
- }
-@@ -265,21 +293,34 @@ static int bcm2708_i2c_master_xfer(struct i2c_adapter *adap,
- bi->nmsgs = num;
- bi->error = false;
-
-+ ret = bcm2708_bsc_setup(bi);
- spin_unlock_irqrestore(&bi->lock, flags);
-
- bcm2708_bsc_setup(bi);
-
-- ret = wait_for_completion_timeout(&bi->done,
-- msecs_to_jiffies(I2C_TIMEOUT_MS));
-+ /* check the result of the setup */
-+ if (ret < 0)
-+ {
-+ dev_err(&adap->dev, "transfer setup timed out\n");
-+ goto error_timeout;
-+ }
-+
-+ ret = wait_for_completion_timeout(&bi->done, msecs_to_jiffies(I2C_TIMEOUT_MS));
- if (ret == 0) {
- dev_err(&adap->dev, "transfer timed out\n");
-- spin_lock_irqsave(&bi->lock, flags);
-- bcm2708_bsc_reset(bi);
-- spin_unlock_irqrestore(&bi->lock, flags);
-- return -ETIMEDOUT;
-+ goto error_timeout;
- }
-
-- return bi->error ? -EIO : num;
-+ ret = bi->error ? -EIO : num;
-+ return ret;
-+
-+error_timeout:
-+ spin_lock_irqsave(&bi->lock, flags);
-+ bcm2708_bsc_reset(bi);
-+ bi->msg = 0; /* to inform the interrupt handler that there's nothing else to be done */
-+ bi->nmsgs = 0;
-+ spin_unlock_irqrestore(&bi->lock, flags);
-+ return -ETIMEDOUT;
- }
-
- static u32 bcm2708_i2c_functionality(struct i2c_adapter *adap)
-@@ -382,6 +423,7 @@ static int bcm2708_i2c_probe(struct platform_device *pdev)
- cdiv = 0xffff;
- baudrate = bus_hz / cdiv;
- }
-+ bi->cdiv = cdiv;
-
- dev_info(&pdev->dev, "BSC%d Controller at 0x%08lx (irq %d) (baudrate %d)\n",
- pdev->id, (unsigned long)regs->start, irq, baudrate);
---
-1.9.1
-
diff --git a/recipes-kernel/linux/linux-raspberrypi_3.14.bb b/recipes-kernel/linux/linux-raspberrypi_3.14.bb
deleted file mode 100644
index f6e6291..0000000
--- a/recipes-kernel/linux/linux-raspberrypi_3.14.bb
+++ /dev/null
@@ -1,11 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
-
-LINUX_VERSION ?= "3.14.28"
-
-SRCREV = "e294028d7733a30f3befacc41d473c251096a515"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.14.y \
- file://0001-ASoC-Add-BCM2708-fixes.patch \
- file://0002-Fix-grabbing-lock-from-atomic-context-in-i2c-driver.patch \
- "
-
-require linux-raspberrypi.inc
--
1.9.1
More information about the yocto
mailing list