[yocto] am335x evmsk screen init:id"00" respawning too fast disabled for 5 minutes yocto sumo
Heiko Schocher
hs at denx.de
Sun Dec 2 20:41:49 PST 2018
Hi n.stanisavljevic,
Am 28.11.2018 um 20:55 schrieb Josef Holzmayr:
> Howdy!
>
> On Wed, Nov 28, 2018 at 03:50:02PM +0000, n.stanisavljevic at polycaptil.fr wrote:
>> Hello everybody
>>
>> here is an introduction of my situation :
>>
>> I build a custom board from schematic of sitara AM335x-evmsk starter kit.
>> I succeed to make a custom OS with yocto (krogoth version) and to boot this OS (embedded Linux) on my custom board.
>>
>> This custom board contain a touchscreen (same touchscreen like in the AM335x-evmsk starter kit).
>>
>> All worked fine on this board while I used krogoth version on yocto.
>>
>> my problem :
>>
>> Few time ago, I decided to migrate to sumo version of yocto.
>> I build with success the OS (embedded Linux) with yocto sumo version for my custom board, but when I try to boot this OS, it's stop/lock and print the following message :
>>
>> "INIT:Id'00' respawning too fast : disabled for 5 minutes" (I put a screenshot of this message ridden on putty).
>> Every 5 minutes I got this message and I can't acces to the user session on putty and on the touchscreen, all board is locked.
>
> This is probably because you are basing off something that sets
> SERIAL_CONSOLES for the yocto-kernel, like
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto/tree/meta-yocto-bsp/conf/machine/beaglebone-yocto.conf?h=master#n23
>
> If you are using a custom tree which does not use the special driver for
> the uart, then you should be fine by setting
> SERIAL_CONSOLES ?= "115200;ttyS0"
> in your MACHINE config
Yep, see also my patch:
https://www.mail-archive.com/yocto@yoctoproject.org/msg42383.html
may it help you ...
bye,
Heiko
>
>>
>> I don't understand why this problem appear when I build a OS with the sumo version on Yocto.
>> I have not this problem when I build a OS with the krogoth version on yocto.
>>
>> Somebody can help me to solve this problem ?
>> what can I do ?
>>
>
> Greetz
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
More information about the yocto
mailing list