[yocto] kernel build in Yocto version 2.5 (sumo)
Ravikiran J
ravikiran.j at mistralsolutions.com
Fri Sep 7 03:23:47 PDT 2018
Dear Yocto team,
Linux kernel image build in Yocto version 2.5 is giving following error.
Freeing unused kernel memory: 2048K (80800000 - 80a00000)
*Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP THUMB2*
Modules linked in:
CPU: 0 PID: 1 Comm: init Not tainted 4.9.0-rt1 #1
Hardware name: Renesas RZ/N1 (DT)
task: be070000 task.stack: be078000
PC is at ret_fast_syscall+0x2/0x4a
LR is at SyS_brk+0xaf/0xec
pc : [<802130a2>] lr : [<80288523>] psr: 60000013
sp : be079fa8 ip : be070000 fp : 00001000
r10: 00000000 r9 : be078000 r8 : 80213264
r7 : 0000002d r6 : 76f92068 r5 : 00010034 r4 : 00000008
r3 : 76fc0f38 r2 : 00040900 r1 : 00000000 r0 : 00027000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 70c5387d Table: be613900 DAC: fffffffd
Process init (pid: 1, stack limit = 0xbe078218)
Stack: (0xbe079fa8 to 0xbe07a000)
9fa0: 00000008 00010034 00000000 00000001 00000000
76fc0f38
9fc0: 00000008 00010034 76f92068 0000002d 00000000 00000001 00000001
00001000
9fe0: 00000001 7e8cee4c 76fa8864 76fa9688 20000010 00000000 55555555
55555555
Code: 00000000 00000000 00000000 b6720000 (1000f8d9)
---[ end trace 0000000000000002 ]---
*Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b*
core-image-minimal image using as a root file system.
*Same kernel recipe build in the Yocto 2.2.2 version is working fine.*
one difference observed in the 2.5 and 2.2.2 kernel build image boot is
build pc name coming as (graco_sm at build) and (oe-user at oe-host) respectively.
Both the Yocto 2.5 and 2.2.2 building in the same pc graco_sm, in 2.5
version taking as oe-user at oe-host, what could be the reason for this ?
2.5 Linux build :
Linux version 4.9.0-rt1 (oe-user at oe-host) (gcc version 7.3.0 (GCC) ) #1 SMP
PREEMPT RT Fri Sep 7 06:53:17 UTC 2018
2.2.2 Linux build :
Linux version 4.9.0-rt1 (graco_sm at build) (gcc version 6.2.0 (GCC) ) #1 SMP
PREEMPT RT Wed Aug 29 19:09:12 IST 2018
For your reference attached the both version kernel boot log files
kernel_yocto_2.2.2.txt and kernel_yocto_2.5.txt.
Attached the linux recipes files.
Kindly help us to resolve this issue.
Thanks and Regards,
Ravikiran J J
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20180907/db584bce/attachment-0001.html>
-------------- next part --------------
** BOOTLOADER STAGE0 for RZN1 **
Boot ROM Version 02.00
Boot source: QSPI
STATUS: Valid SPKG header not found (100 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (200 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (300 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (400 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (500 QSPI Flash 256-byte blocks read)
00 BOOTLOADER STAGE0 Success
*** Bootloader stage0 END ***
*** Execute 2nd Stage Bootloader which has been loaded and verified ***
U-Boot 2017.01-00100-g1022dcc (Sep 05 2018 - 16:05:30 +0530)
Model: RZ/N1D GRACO Board
DRAM: 1 GiB
MMC: sdhci at 0x40100000: 0, sdhci at 0x40101000: 1
SF: Detected is25lq016b with page size 256 Bytes, erase size 64 KiB, total 2 MiB, mapped at 10000000
In: serial at 0x40060000
Out: serial at 0x40060000
Err: serial at 0x40060000
WATCHDOG REBOOT: NO
WATCHDOG timer set to 3 minutes
Net: dwmac.44000000, dwmac.44002000
Hit any key to stop autoboot: 5 0
Enter password : *****
Password fine!!
SF: Detected is25lq016b with page size 256 Bytes, erase size 64 KiB, total 2 MiB, mapped at 10000000
Erasing SPI flash...Writing to SPI flash...done
WATCHDOG timer set to 30 minutes
Password entry successful
=> boot
reading uImage-rzn1d400-graco-no-cm3.dtb
45489 bytes read in 19 ms (2.3 MiB/s)
reading uImage-rzn1d400-graco.bin
3982248 bytes read in 231 ms (16.4 MiB/s)
## Booting kernel from Legacy Image at 80008000 ...
Image Name: Linux-4.9.0-rt1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3982184 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 80fe0000
Booting using the fdt blob at 0x80fe0000
Loading Kernel Image ... OK
Loading Device Tree to bfff1000, end bffff1b0 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.9.0-rt1 (graco_sm at build) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT RT Wed Aug 29 19:09:12 IST 2018
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=70c5387d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: RZ/N1D GRACO Board
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
percpu: Embedded 14 pages/cpu @bf7aa000 s26144 r8192 d23008 u57344
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
Kernel command line: ip=192.168.15.39:::::eth0 clk_ignore_unused rootfstype=ext4 root=/dev/mmcblk0p2 rootwait console=ttyS0,115200 earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030116K/1048576K available (4096K kernel code, 198K rwdata, 1772K rodata, 2048K init, 219K bss, 18460K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc0800000 - 0xff800000 (1008 MB)
lowmem : 0x80000000 - 0xc0000000 (1024 MB)
modules : 0x7f800000 - 0x80000000 ( 8 MB)
.text : 0x80008000 - 0x80600000 (6112 kB)
.init : 0x80800000 - 0x80a00000 (2048 kB)
.data : 0x80a00000 - 0x80a31b00 ( 199 kB)
.bss : 0x80a33000 - 0x80a69ddc ( 220 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
RCU kthread priority: 1.
NR_IRQS:16 nr_irqs:16 16
arm_arch_timer: Architected cp15 timer(s) running at 6.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e6b, max_idle_ns: 440795202301 ns
sched_clock: 56 bits at 6MHz, resolution 160ns, wraps every 4398046511040ns
Switching to timer-based delay loop, resolution 160ns
rzn1-timer1 base clock @25000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
RZ/N1 CPU#2 boot address 200c8148
Setting up static identity map for 0x80200000 - 0x80200030
RZ/N1 CPU#1 writing 80201409 to boot address
Brought up 2 CPUs
SMP: Total of 2 processors activated (25.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
rzn1-pinctrl 40067000.pinctrl: initialized rzn1 pinctrl driver
dw_dmac 40104000.dma-controller: DesignWare DMA Controller, 8 channels
dw_dmac 40104000.dma-controller: RZ/N1 init cfg_dmamux=0xffff
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pca953x 0-0038: failed reading register
pca953x: probe of 0-0038 failed with error -121
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kvm [1]: HYP mode not available
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_0 to GPIO2A[24]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_1 to GPIO2A[4]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_2 to GPIO1A[28]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_3 to GPIO2A[25]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_4 to GPIO2A[27]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_5 to GPIO2A[26]
gpio_irq_mux gpioirq at 0x4000C000: probed
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=30 max_order=18 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
jffs2: version 2.2. (NAND) (SUMMARY) 漏 2001-2006 Red Hat, Inc.
fuse init (API version 7.26)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
rzn1: USB PLL already started
pci-rcar-gen2 40030000.pci: PCI: bus0 revision 11
pci-rcar-gen2 40030000.pci: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x40020000-0x400210ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:01.0: BAR 0: assigned [mem 0x40020000-0x40020fff]
pci 0000:00:02.0: BAR 0: assigned [mem 0x40021000-0x400210ff]
pci 0000:00:01.0: enabling device (0140 -> 0142)
pci 0000:00:02.0: enabling device (0140 -> 0142)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
40060000.serial: ttyS0 at MMIO 0x40060000 (irq = 39, base_baud = 4807692) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
40061000.serial: ttyS1 at MMIO 0x40061000 (irq = 40, base_baud = 4807692) is a 16550A
40062000.serial: ttyS2 at MMIO 0x40062000 (irq = 41, base_baud = 4807692) is a 16550A
[AC_I|ctc_init:199] CTC: Start initialization of CTC module version 4.1.
[AC_I|ctc_init:231] Created ctc class.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan0.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan1.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan2.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan3.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan4.
[AC_I|ctc_init:250] CTC module version 4.1 initialized.
loop: module loaded
rzn1-qspi 40005000.spi: _rzn1_qspi_set_baudrate_div: output clock is 7812500Hz (div = 32)
rzn1-qspi 40005000.spi: is25lq016b (2048 Kbytes)
rzn1-qspi 40005000.spi: _rzn1_qspi_set_baudrate_div: output clock is 62500000Hz (div = 4)
5 ofpart partitions found on MTD device 40005000.spi
Creating 5 MTD partitions on "40005000.spi":
0x000000000000-0x000000010000 : "qspi0:spl"
0x000000010000-0x000000020000 : "qspi0:pkgt"
0x000000020000-0x0000000a0000 : "qspi0:u-boot"
0x0000000a0000-0x0000000b0000 : "qspi0:env"
0x0000000b0000-0x000000200000 : "qspi0:data"
rzn1-qspi 40005000.spi: probed
dw_spi_mmio 50007000.spi: DMA init failed
libphy: Fixed MDIO Bus: probed
CAN device driver interface
usbcore: registered new interface driver peak_usb
sja1000 CAN netdevice driver
sja1000_platform 52104000.can: sja1000_platform device registered (reg_base=c08cd000, irq=63)
sja1000_platform 52105000.can: sja1000_platform device registered (reg_base=c08cf000, irq=64)
rzn1-pinctrl 40067000.pinctrl: setting mdio 0 to 0x1
stmmaceth 44000000.ethernet: no reset control found
stmmac - user ID: 0x20, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported
COE Type 2
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
stmmaceth 44002000.ethernet: no reset control found
stmmac - user ID: 0x21, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported
COE Type 2
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
rzn1-pinctrl 40067000.pinctrl: setting mdio 1 to 0x7
mt5pt_switch 44050000.eth-switch: MDIO clk is 2450980 Hz
mt5pt_switch 44050000.eth-switch: MoreThanIP 5-port switch revision 1024
libphy: 44050000.eth-switch: probed
mt5pt_switch 44050000.eth-switch: phy at 5: Micrel KSZ8041
mt5pt_switch 44050000.eth-switch: open port A
mt5pt_switch 44050000.eth-switch: phy at 1: Micrel KSZ8041
mt5pt_switch 44050000.eth-switch: open port B
rzn1-miic 44030000.eth-miic: nr phy ports 5
rzn1-miic 44030000.eth-miic: /bus/eth-miic at 0x44030000/eth-mii0 rgmii-id
rzn1-miic 44030000.eth-miic: /bus/eth-switch at 0x44050000/ethernet-phy at 12 phy is not physically present
rzn1-miic 44030000.eth-miic: /bus/eth-switch at 0x44050000/ethernet-phy at 11 phy is not physically present
rzn1-miic 44030000.eth-miic: /bus/eth-miic at 0x44030000/eth-mii3 mii
rzn1-miic 44030000.eth-miic: /bus/eth-miic at 0x44030000/eth-mii4 mii
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.0: EHCI Host Controller
ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.0: irq 62, io mem 0x40021000
ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.0-rt1 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:01.0: OHCI PCI host controller
ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:01.0: irq 62, io mem 0x40020000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.9.0-rt1 ohci_hcd
usb usb2: SerialNumber: 0000:00:01.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbf_probe completed (gadget usbf_renesas)
using random self ethernet address
using random host ethernet address
usb0: HOST MAC ba:c0:91:28:84:ed
usb0: MAC 8e:77:dc:d7:b7:c2
using random self ethernet address
using random host ethernet address
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
usbf_renesas 4001e000.usbf: usbf_renesas bind to driver g_ether
rzn1-rtc 40006000.rtc: rtc core: registered 40006000.rtc as rtc0
i2c /dev entries driver
ina2xx 1-0040: power monitor ina226 (Rshunt = 15000 uOhm)
lm75 1-0048: hwmon1: sensor 'lm75'
lm75 1-004b: hwmon2: sensor 'lm75'
EDAC MC0: Giving out device to module cadence_mc_edac controller cadence,ddr-ctrl: DEV 4000d000.memory-controller (INTERRUPT)
cadence_mc_edac 4000d000.memory-controller: DDR EDAC (Error Detection And Correction): ECC Disabled
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usb 1-1: new high-speed USB device number 2 using ehci-pci
mmc0: SDHCI controller on 40100000.sdhci [40100000.sdhci] using ADMA
NOHZ: local_softirq_pending 100
mmc0: new high speed SDHC card at address aaaa
mmc1: SDHCI controller on 40101000.sdhci [40101000.sdhci] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20161123 t)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
mmcblk0: mmc0:aaaa JULIE 14.8 GiB
rzn1-rtc 40006000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
mmcblk0: p1 p2 p3
mmc1: new high speed MMC card at address 0001
[AC_W|goal_ctcStatusValidation:514] CTC validation expired.
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 02
mmcblk1: mmc1:0001 W62704 3.56 GiB
NOHZ: local_softirq_pending 02
mmcblk1boot0: mmc1:0001 W62704 partition 1 2.00 MiB
mmcblk1boot1: mmc1:0001 W62704 partition 2 2.00 MiB
usb 1-1: New USB device found, idVendor=0424, idProduct=2513
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
stmmaceth 44000000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
stmmaceth 44000000.ethernet eth0: registered PTP clock
mmcblk1rpmb: mmc1:0001 W62704 partition 3 512 KiB
mmcblk1: p1 p2 p3
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b720
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: 802.11n WLAN Adapter
usb 1-1.3: Manufacturer: Realtek
usb 1-1.3: SerialNumber: 00e04c000001
rzn1-miic 44030000.eth-miic: RGMII/GMII Converter 0 link up, 100Mbps
stmmaceth 44000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, hwaddr=00:00:0a:02:57:be, ipaddr=192.168.15.39, mask=255.255.255.0, gw=255.255.255.255
host=192.168.15.39, domain=, nis-domain=(none)
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
Bluetooth: Starting self testing
Bluetooth: ECDH test passed in 124857 usecs
Bluetooth: SMP test passed in 218 usecs
Bluetooth: Finished self testing
clk: Not disabling unused clocks
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 2048K (80800000 - 80a00000)
random: fast init done
INIT: version 2.88 booting
Starting udev
udevd[871]: starting version 3.2
udevd[872]: starting eudev-3.2
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
usbcore: registered new interface driver btusb
Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Bluetooth: hci0: rtl: loading rtl8723b_config.bin
bluetooth hci0: Direct firmware load for rtl8723b_config.bin failed with error -2
Bluetooth: hci0: Failed to load rtl8723b_config.bin
Bluetooth: hci0: rtl: loading rtl8723b_fw.bin
Bluetooth: hci0: rom_version status=0 version=1
Bluetooth: cfg_sz 0, total size 22496
RTL871X: module init start
RTL871X: rtl8723bu v4.3.6.11_12942.20141204_BTCOEX20140507-4E40
RTL871X: rtl8723bu BT-Coex version = BTCOEX20140507-4E40
m25p80 spi32766.1: unrecognized JEDEC id bytes: ff, ff, ff
m25p80 spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
m25p80 spi32766.2: unrecognized JEDEC id bytes: ff, ff, ff
m25p80 spi32766.3: unrecognized JEDEC id bytes: ff, ff, ff
RTL871X: rtw_ndev_init(wlan0)
RTL871X: rtw_ndev_init(wlan1)
usbcore: registered new interface driver rtl8723bu
RTL871X: module init ret=0
Thu Aug 30 14:18:51 UTC 2018
INIT: Entering runlevel: 5
Configuring network interfaces... NOHZ: local_softirq_pending 02
done.
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Starting rpcbind daemon...done.
Starting watchdog: [ OK ]
Starting watchdog keepalive daemon: wd_keepalive.
starting statd: done
Starting bluetooth
bluetoothd
Starting DHCP server: .
Fuse filesystem already available.
Mounting fuse control filesystem.
Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf
rfkill: Cannot open RFKILL control device
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 02
RTL871X: RTW_ADAPTIVITY_EN_
AUTO, chplan:0x20, Regulation:3,3
RTL871X: RTW_ADAPTIVITY_MODE_NORMAL
Using interface wlan0 with hwaddr 34:c9:f0:87:a3:ac and ssid "test"
RTL871X: assoc success
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED
hostapd.
exportfs: can't open /etc/exports for reading
NFS daemon support not enabled in kernel
Starting syslogd/klogd: done
* starting FTP Server: vsftpd... done.
Starting nginx: nginx.
stmmaceth 44002000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
stmmaceth 44002000.ethernet eth1: registered PTP clock
stmmaceth 44002000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
No GOAL application found
Poky (Yocto Project Reference Distro) 2.2.2 rzn1d400-graco /dev/ttyS0
rzn1d400-graco login:
-------------- next part --------------
** BOOTLOADER STAGE0 for RZN1 **
Boot ROM Version 02.00
Boot source: QSPI
STATUS: Valid SPKG header not found (100 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (200 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (300 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (400 QSPI Flash 256-byte blocks read)
STATUS: Valid SPKG header not found (500 QSPI Flash 256-byte blocks read)
00 BOOTLOADER STAGE0 Success
*** Bootloader stage0 END ***
*** Execute 2nd Stage Bootloader which has been loaded and verified ***
U-Boot 2017.01-00100-g1022dcc (Sep 05 2018 - 16:05:30 +0530)
Model: RZ/N1D GRACO Board
DRAM: 1 GiB
MMC: sdhci at 0x40100000: 0, sdhci at 0x40101000: 1
SF: Detected is25lq016b with page size 256 Bytes, erase size 64 KiB, total 2 MiB, mapped at 10000000
In: serial at 0x40060000
Out: serial at 0x40060000
Err: serial at 0x40060000
WATCHDOG REBOOT: NO
WATCHDOG timer set to 3 minutes
Net: dwmac.44000000, dwmac.44002000
Hit any key to stop autoboot: 5 0
Enter password : *****
Password fine!!
SF: Detected is25lq016b with page size 256 Bytes, erase size 64 KiB, total 2 MiB, mapped at 10000000
Erasing SPI flash...Writing to SPI flash...done
WATCHDOG timer set to 30 minutes
Password entry successful
=> boot
reading uImage-rzn1d400-graco-no-cm3.dtb
45481 bytes read in 19 ms (2.3 MiB/s)
reading uImage-rzn1d400-graco.bin
3982312 bytes read in 234 ms (16.2 MiB/s)
## Booting kernel from Legacy Image at 80008000 ...
Image Name: Linux-4.9.0-rt1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3982248 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 80fe0000
Booting using the fdt blob at 0x80fe0000
Loading Kernel Image ... OK
Loading Device Tree to bfff1000, end bffff1a8 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.9.0-rt1 (oe-user at oe-host) (gcc version 7.3.0 (GCC) ) #1 SMP PREEMPT RT Fri Sep 7 06:53:17 UTC 2018
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=70c5387d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: RZ/N1D GRACO Board
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
percpu: Embedded 14 pages/cpu @bf7aa000 s26144 r8192 d23008 u57344
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
Kernel command line: ip=192.168.15.39:::::eth0 clk_ignore_unused rootfstype=ext4 root=/dev/mmcblk0p2 rootwait console=ttyS0,115200 earlyprintk
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030116K/1048576K available (4096K kernel code, 198K rwdata, 1708K rodata, 2048K init, 219K bss, 18460K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc0800000 - 0xff800000 (1008 MB)
lowmem : 0x80000000 - 0xc0000000 (1024 MB)
modules : 0x7f800000 - 0x80000000 ( 8 MB)
.text : 0x80008000 - 0x80600000 (6112 kB)
.init : 0x80800000 - 0x80a00000 (2048 kB)
.data : 0x80a00000 - 0x80a31b00 ( 199 kB)
.bss : 0x80a33000 - 0x80a69e1c ( 220 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU debugfs-based tracing is enabled.
RCU kthread priority: 1.
NR_IRQS:16 nr_irqs:16 16
arm_arch_timer: Architected cp15 timer(s) running at 6.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e6b, max_idle_ns: 440795202301 ns
sched_clock: 56 bits at 6MHz, resolution 160ns, wraps every 4398046511040ns
Switching to timer-based delay loop, resolution 160ns
rzn1-timer1 base clock @25000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
RZ/N1 CPU#2 boot address 200c8148
Setting up static identity map for 0x80200000 - 0x80200030
RZ/N1 CPU#1 writing 80201409 to boot address
Brought up 2 CPUs
SMP: Total of 2 processors activated (25.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
rzn1-pinctrl 40067000.pinctrl: initialized rzn1 pinctrl driver
dw_dmac 40104000.dma-controller: DesignWare DMA Controller, 8 channels
dw_dmac 40104000.dma-controller: RZ/N1 init cfg_dmamux=0xffff
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pca953x 0-0038: failed reading register
pca953x: probe of 0-0038 failed with error -121
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kvm [1]: HYP mode not available
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_0 to GPIO2A[24]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_1 to GPIO2A[4]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_2 to GPIO1A[28]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_3 to GPIO2A[25]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_4 to GPIO2A[27]
rzn1-pinctrl 40067000.pinctrl: setting RZN1_IRQ_GPIO_5 to GPIO2A[26]
gpio_irq_mux gpioirq at 0x4000C000: probed
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=30 max_order=18 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
jffs2: version 2.2. (NAND) (SUMMARY) 漏 2001-2006 Red Hat, Inc.
fuse init (API version 7.26)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
rzn1: USB PLL already started
pci-rcar-gen2 40030000.pci: PCI: bus0 revision 11
pci-rcar-gen2 40030000.pci: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x40020000-0x400210ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:01.0: BAR 0: assigned [mem 0x40020000-0x40020fff]
pci 0000:00:02.0: BAR 0: assigned [mem 0x40021000-0x400210ff]
pci 0000:00:01.0: enabling device (0140 -> 0142)
pci 0000:00:02.0: enabling device (0140 -> 0142)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
40060000.serial: ttyS0 at MMIO 0x40060000 (irq = 39, base_baud = 4807692) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
[AC_I|ctc_init:199] CTC: Start initialization of CTC module version 4.1.
[AC_I|ctc_init:231] Created ctc class.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan0.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan1.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan2.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan3.
[AC_I|goal_ctcPureChnInit:432] Created device c2c_chan4.
[AC_I|ctc_init:250] CTC module version 4.1 initialized.
loop: module loaded
rzn1-qspi 40005000.spi: _rzn1_qspi_set_baudrate_div: output clock is 7812500Hz (div = 32)
rzn1-qspi 40005000.spi: is25lq016b (2048 Kbytes)
rzn1-qspi 40005000.spi: _rzn1_qspi_set_baudrate_div: output clock is 62500000Hz (div = 4)
5 ofpart partitions found on MTD device 40005000.spi
Creating 5 MTD partitions on "40005000.spi":
0x000000000000-0x000000010000 : "qspi0:spl"
0x000000010000-0x000000020000 : "qspi0:pkgt"
0x000000020000-0x0000000a0000 : "qspi0:u-boot"
0x0000000a0000-0x0000000b0000 : "qspi0:env"
0x0000000b0000-0x000000200000 : "qspi0:data"
rzn1-qspi 40005000.spi: probed
dw_spi_mmio 50007000.spi: DMA init failed
libphy: Fixed MDIO Bus: probed
CAN device driver interface
usbcore: registered new interface driver peak_usb
sja1000 CAN netdevice driver
sja1000_platform 52104000.can: sja1000_platform device registered (reg_base=c08c9000, irq=61)
sja1000_platform 52105000.can: sja1000_platform device registered (reg_base=c08cb000, irq=62)
rzn1-pinctrl 40067000.pinctrl: setting mdio 0 to 0x1
stmmaceth 44000000.ethernet: no reset control found
stmmac - user ID: 0x20, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported
COE Type 2
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
libphy: stmmac: probed
stmmaceth 44002000.ethernet: no reset control found
stmmac - user ID: 0x21, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported
COE Type 2
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
rzn1-pinctrl 40067000.pinctrl: setting mdio 1 to 0x7
mt5pt_switch 44050000.eth-switch: MDIO clk is 2450980 Hz
mt5pt_switch 44050000.eth-switch: MoreThanIP 5-port switch revision 1024
libphy: 44050000.eth-switch: probed
mt5pt_switch 44050000.eth-switch: phy at 5: Micrel KSZ8041
mt5pt_switch 44050000.eth-switch: open port A
mt5pt_switch 44050000.eth-switch: phy at 1: Micrel KSZ8041
mt5pt_switch 44050000.eth-switch: open port B
rzn1-miic 44030000.eth-miic: nr phy ports 5
rzn1-miic 44030000.eth-miic: /bus/eth-miic at 0x44030000/eth-mii0 rgmii-id
rzn1-miic 44030000.eth-miic: /bus/eth-switch at 0x44050000/ethernet-phy at 12 phy is not physically present
rzn1-miic 44030000.eth-miic: /bus/eth-switch at 0x44050000/ethernet-phy at 11 phy is not physically present
rzn1-miic 44030000.eth-miic: /bus/eth-miic at 0x44030000/eth-mii3 mii
rzn1-miic 44030000.eth-miic: /bus/eth-miic at 0x44030000/eth-mii4 mii
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.0: EHCI Host Controller
ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.0: irq 60, io mem 0x40021000
ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.0-rt1 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:01.0: OHCI PCI host controller
ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:01.0: irq 60, io mem 0x40020000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.9.0-rt1 ohci_hcd
usb usb2: SerialNumber: 0000:00:01.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbf_probe completed (gadget usbf_renesas)
using random self ethernet address
using random host ethernet address
usb0: HOST MAC d6:46:80:f8:1c:84
usb0: MAC 6e:a6:58:f4:86:ea
using random self ethernet address
using random host ethernet address
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
usbf_renesas 4001e000.usbf: usbf_renesas bind to driver g_ether
rzn1-rtc 40006000.rtc: rtc core: registered 40006000.rtc as rtc0
i2c /dev entries driver
ina2xx 1-0040: power monitor ina226 (Rshunt = 15000 uOhm)
lm75 1-0048: hwmon1: sensor 'lm75'
lm75 1-004b: hwmon2: sensor 'lm75'
EDAC MC0: Giving out device to module cadence_mc_edac controller cadence,ddr-ctrl: DEV 4000d000.memory-controller (INTERRUPT)
cadence_mc_edac 4000d000.memory-controller: DDR EDAC (Error Detection And Correction): ECC Disabled
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usb 1-1: new high-speed USB device number 2 using ehci-pci
mmc0: SDHCI controller on 40100000.sdhci [40100000.sdhci] using ADMA
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa JULIE 14.8 GiB
mmc1: SDHCI controller on 40101000.sdhci [40101000.sdhci] using ADMA
mmcblk0: p1 p2 p3
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20161123 t)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
mmc1: new high speed MMC card at address 0001
mmcblk1: mmc1:0001 W62704 3.56 GiB
rzn1-rtc 40006000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
mmcblk1boot0: mmc1:0001 W62704 partition 1 2.00 MiB
mmcblk1boot1: mmc1:0001 W62704 partition 2 2.00 MiB
mmcblk1rpmb: mmc1:0001 W62704 partition 3 512 KiB
mmcblk1: p1 p2 p3
[AC_W|goal_ctcStatusValidation:514] CTC validation expired.
usb 1-1: New USB device found, idVendor=0424, idProduct=2513
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
stmmaceth 44000000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
stmmaceth 44000000.ethernet eth0: registered PTP clock
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b720
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: 802.11n WLAN Adapter
usb 1-1.3: Manufacturer: Realtek
usb 1-1.3: SerialNumber: 00e04c000001
rzn1-miic 44030000.eth-miic: RGMII/GMII Converter 0 link up, 100Mbps
stmmaceth 44000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, hwaddr=00:00:0a:02:57:be, ipaddr=192.168.15.39, mask=255.255.255.0, gw=255.255.255.255
host=192.168.15.39, domain=, nis-domain=(none)
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
Bluetooth: Starting self testing
Bluetooth: ECDH test passed in 122315 usecs
Bluetooth: SMP test passed in 351 usecs
Bluetooth: Finished self testing
clk: Not disabling unused clocks
random: fast init done
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 2048K (80800000 - 80a00000)
Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP THUMB2
Modules linked in:
CPU: 0 PID: 1 Comm: init Not tainted 4.9.0-rt1 #1
Hardware name: Renesas RZ/N1 (DT)
task: be070000 task.stack: be078000
PC is at ret_fast_syscall+0x2/0x4a
LR is at SyS_brk+0xaf/0xec
pc : [<802130a2>] lr : [<80288523>] psr: 60000013
sp : be079fa8 ip : be070000 fp : 00001000
r10: 00000000 r9 : be078000 r8 : 80213264
r7 : 0000002d r6 : 76f92068 r5 : 00010034 r4 : 00000008
r3 : 76fc0f38 r2 : 00040900 r1 : 00000000 r0 : 00027000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 70c5387d Table: be613900 DAC: fffffffd
Process init (pid: 1, stack limit = 0xbe078218)
Stack: (0xbe079fa8 to 0xbe07a000)
9fa0: 00000008 00010034 00000000 00000001 00000000 76fc0f38
9fc0: 00000008 00010034 76f92068 0000002d 00000000 00000001 00000001 00001000
9fe0: 00000001 7e8cee4c 76fa8864 76fa9688 20000010 00000000 55555555 55555555
Code: 00000000 00000000 00000000 b6720000 (1000f8d9)
---[ end trace 0000000000000002 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.9.0-rt1 #1
Hardware name: Renesas RZ/N1 (DT)
[<80217b61>] (unwind_backtrace) from [<80215363>] (show_stack+0xb/0xc)
[<80215363>] (show_stack) from [<80388875>] (dump_stack+0x51/0x68)
[<80388875>] (dump_stack) from [<802173ab>] (handle_IPI+0xab/0x15c)
[<802173ab>] (handle_IPI) from [<802013dd>] (gic_handle_irq+0x55/0x64)
[<802013dd>] (gic_handle_irq) from [<80215b33>] (__irq_svc+0x53/0xa8)
Exception stack(0xbe0a7f98 to 0xbe0a7fe0)
7f80: 00000001 00000000
7fa0: 00000000 8021b861 00000000 80a043f4 00000002 ffffe000 00000000 80a04444
7fc0: 8075af64 00000000 01400000 be0a7fe8 80213997 8021398e 40000033 ffffffff
[<80215b33>] (__irq_svc) from [<8021398e>] (arch_cpu_idle+0xc/0x1e)
[<8021398e>] (arch_cpu_idle) from [<80244001>] (cpu_startup_entry+0xc9/0x140)
[<80244001>] (cpu_startup_entry) from [<80201491>] (__enable_mmu+0x1/0x10)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: linux-rzn1.inc
Type: application/octet-stream
Size: 1346 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20180907/db584bce/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: linux-rzn1_4.9.bb
Type: application/octet-stream
Size: 1181 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20180907/db584bce/attachment-0003.obj>
More information about the yocto
mailing list