[yocto] Segmentation fault | bitbake machine-image.bb | core dumped
Randy MacLeod
randy.macleod at windriver.com
Wed Aug 14 19:00:59 PDT 2019
On 8/12/19 10:42 AM, jaymin.dabhi at vivaldi.net wrote:
> Hello All,
>
> Facing segmentation fault (core dumped) while doing bitbake.
> I am using Yocto Jethro branch.
Jethro isn't officially supported by the Yocto Project.
The support cycle is ~ 1 year.
https://wiki.yoctoproject.org/wiki/Releases
Can you reproduce the issue on master or a newer supported branch?
If so you could file a bug in:
https://wiki.yoctoproject.org/wiki/Releases
Also, see below for some tips.
>
> When I added python3-pip recipe (in local.conf) and started building
> image, segmentation fault occurred.
> Although, I am able to bitbake python3-pip individually (i.e. bitbake
> python3-pip).
> As per log my assumption is, core dumped is occurring at make_ext4fs
> execution.
>
> Following are the error logs:
>
> ERROR: Function failed: do_makesystem (log file is located at
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/temp/log.do_makesystem.15059)
>
> ERROR: Logfile of failure stored in:
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/temp/log.do_makesystem.15059
>
> Log data follows:
> | DEBUG: Executing shell function do_makesystem
> |
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/temp/run.do_makesystem.15059:
> line 105: 15073 Segmentation fault (core dumped) make_ext4fs -J -b
> 1024 -s -a / -S
Odd, I've never see that happen before.
Is it reproducible?
Can you adjust the core file limits using 'ulimit',
generate a core file and get a backtrace?
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/rootfs/etc/selinux/mls/contexts/files/file_contexts
> -l 768000000
> poky/build/tmp-glibc/deploy/images/apq8053-perf/apq8053-sysfs.ext4
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/rootfs
> | WARNING:
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/temp/run.do_makesystem.15059:1
> exit 139 from
> | make_ext4fs -J -b 1024 -s -a / -S
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/rootfs/etc/selinux/mls/contexts/files/file_contexts
> -l 768000000
> poky/build/tmp-glibc/deploy/images/apq8053-perf/apq8053-sysfs.ext4
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/rootfs
> | ERROR: Function failed: do_makesystem (log file is located at
> poky/build/tmp-glibc/work/apq8053-oe-linux/machine-image/1.0-r0/temp/log.do_makesystem.15059)
>
> ERROR: Task 11 (
> poky/meta-qti-bsp/recipes-products/images/machine-image.bb,
> do_makesystem) failed with exit code '1'
>
>
> Whether python3-pip recipe is creating an issue or something else?
> (attached the python3-pip recipe file)
What did you change in your conf/local.conf file?
If you revert that change, then you are able to generate the image
again?
../Randy
> Please let me know.
> Any suggestions are welcome.
>
> Regards,
> Jaymin
>
--
# Randy MacLeod
# Wind River Linux
More information about the yocto
mailing list