[linux-yocto] [PATCH 04/39] LSI powerpc/boot: added for rapidio
Charlie Paul
cpaul.windriver at gmail.com
Fri Apr 11 14:13:05 PDT 2014
---
arch/arm/boot/dts/axm55xx.dts | 33 +++
arch/powerpc/boot/dts/lsi_acp342x.dts | 317 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/lsi_acp344x.dts | 355 +++++++++++++++++++++++++++++++++
3 files changed, 705 insertions(+)
create mode 100644 arch/powerpc/boot/dts/lsi_acp342x.dts
create mode 100644 arch/powerpc/boot/dts/lsi_acp344x.dts
diff --git a/arch/arm/boot/dts/axm55xx.dts b/arch/arm/boot/dts/axm55xx.dts
index 1aabe31..230a305 100644
--- a/arch/arm/boot/dts/axm55xx.dts
+++ b/arch/arm/boot/dts/axm55xx.dts
@@ -35,6 +35,8 @@
serial0 = &axxia_serial0;
timer = &axxia_timers;
ethernet0 = &axxia_femac0;
+ rapidio0 = &rio0;
+ rapidio1 = &rio1;
};
cpus {
@@ -455,6 +457,37 @@
reg = <0x20 0x10098000 0 0x3000>;
interrupts = <0 45 4>;
};
+
+ rio0: rapidio at 0x3100000000 {
+ index = <0>;
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "axxia,rapidio-delta";
+ device_type = "rapidio";
+ reg = <0x0020 0x20142000 0x0 0x1000>; /* SRIO Conf 0 region */
+ ranges = <0x0 0x0 0x0031 0x00000000 0x0 0x40000000>;
+ linkdown-reset = <0x0200 0x100 0x0020 0x10000000 0x0 0x000010000>;
+ interrupts = <0 89 4>;
+ outb-dmes = <2 0x00000003 1 0x00000000>;
+ enable_ds = <1>;
+ };
+
+ rio1: rapidio at 0x3140000000 {
+ index = <1>;
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "axxia,rapidio-delta";
+ device_type = "rapidio";
+ reg = <0x0020 0x20143000 0x0 0x1000>; /* SRIO Conf 1 region */
+ ranges = <0x0 0x0 0x0031 0x40000000 0x0 0x40000000>;
+ linkdown-reset = <0x0200 0x200 0x0020 0x10000000 0x0 0x000010000>;
+ interrupts = <0 90 4>;
+ outb-dmes = <2 0x00000003 1 0x00000000>;
+ enable_ds = <1>;
+ };
+
};
/*
diff --git a/arch/powerpc/boot/dts/lsi_acp342x.dts b/arch/powerpc/boot/dts/lsi_acp342x.dts
new file mode 100644
index 0000000..da6066e
--- /dev/null
+++ b/arch/powerpc/boot/dts/lsi_acp342x.dts
@@ -0,0 +1,317 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2009 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer at linux.vnet.ibm.com>, David Gibson <dwg at au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "ibm,acpx1-4xx";
+ compatible = "ibm,acpx1-4xx","ibm,47x-AMP";
+ dcr-parent = <&{/cpus/cpu at 0}>;
+
+ aliases {
+ serial0 = &UART0;
+ serial1 = &UART1;
+ rapidio0 = &rio0;
+ ethernet0 = &FEMAC;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <0>;
+ clock-frequency = <0x5f5e1000>;
+ timebase-frequency = <0x5f5e1000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ reset-type = <3>; // 1=core, 2=chip, 3=system (default)
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <1>;
+ clock-frequency = <0x5f5e1000>;
+ timebase-frequency = <0x5f5e1000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x2040>;
+ reset-type = <3>; // 1=core, 2=chip, 3=system (default)
+ };
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x10000000>;
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>;
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00030000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ pic-no-reset;
+ };
+
+ plb {
+ /* Could be PLB6, doesn't matter */
+ compatible = "ibm,plb-4xx", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; // Filled in by zImage
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full 32-bit
+ range */
+ ranges = <0x00000000 0x00000020 0x00000000 0x80000000
+ 0x80000000 0x00000020 0x80000000 0x80000000>;
+ clock-frequency = <0>; // Filled in by zImage
+ UART0: serial at 00404000 {
+ device_type = "serial";
+ compatible = "acp-uart0";
+ enabled = <1>;
+ reg = <0x00404000 0x1000>;
+ clock-reg = <0x00408040 0x20>;
+ clock-frequency = <200000000>;
+ current-speed = <9600>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <22>;
+ };
+ UART1: serial at 00405000 {
+ device_type = "serial";
+ compatible = "acp-uart1";
+ enabled = <0>;
+ reg = <0x00405000 0x1000>;
+ clock-reg = <0x00408060 0x20>;
+ clock-frequency = <200000000>;
+ current-speed = <9600>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <23>;
+ };
+ USB0: usb at 004a4000 {
+ device_type = "usb";
+ compatible = "acp-usb";
+ enabled = <0>;
+ reg = <0x004a4000 0x00020000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <31>;
+ };
+ I2C: i2c at 00403000 {
+ compatible = "acp-i2c";
+ enabled = <0>;
+ reg = <0x00403000 0x00001000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <21>;
+ };
+ SSP: ssp at 00402000 {
+ compatible = "acp-ssp";
+ enabled = <0>;
+ reg = <0x00402000 0x00001000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <20>;
+ };
+ NAND: nand at 00440000 {
+ device_type = "nand";
+ compatible = "acp-nand";
+ enabled = <1>;
+ reg = <0x00440000 0x20000
+ 0x0040c000 0x1000>;
+ };
+ FEMAC: femac at 00480000 {
+ device_type = "network";
+ compatible = "acp-femac";
+ enabled = <1>;
+ reg = <0x00480000 0x1000
+ 0x00481000 0x1000
+ 0x00482000 0x1000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <33>;
+ mdio-reg = <0x00409000 0x1000>;
+ // The following will get filled in by
+ // the boot loader.
+ mdio-clock = <0>;
+ phy-address = <0>;
+ ad-value = <0>;
+ mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+
+ nvrtc {
+ compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+ reg = <0 0xEF703000 0x2000>;
+ };
+
+ system {
+ ncr_0x00a_0x010_0x0002c = <0>; // filled in by the boot loader.
+ ncr_0x016_0x0ff_0x00010 = <0>; // filled in by the boot loader.
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial at 00404000";
+ };
+
+ PCIE0: pciex at f00c0000 {
+ compatible = "lsi,plb-pciex";
+ device_type = "pci";
+ enabled = <0>;
+ plx = <0>;
+ primary;
+ port = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ /* config space access MPAGE7 registers*/
+ reg = <0x0020 0x78000000 0x01000000
+ 0x0020 0x004c0000 0x00008000 >;
+ bus-range = <0 0x0f>;
+ /* Outbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU (PLB) addr> <2-cell size> > */
+ ranges = <0x02000000 0x00000000 0xa0000000
+ 0x20 0x40000000
+ 0x00 0x10000000>;
+ /* Inbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU addr> <2-cell size> > */
+ dma-ranges = <0x02000000 0x00000000 0x00000000
+ 0x00 0x00000000
+ 0x00 0x10000000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <29 2>;
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ /* <3-cell dev> <irq#> <prnt> <2-cell prnt IRQ/sense> */
+ 0000 0 0 1 &MPIC 29 2
+ 0000 0 0 2 &MPIC 29 2
+ 0000 0 0 3 &MPIC 29 2
+ 0000 0 0 4 &MPIC 29 2
+ >;
+ };
+
+ PCIE1: pciex at f00c8000 {
+ compatible = "lsi,plb-pciex";
+ device_type = "pci";
+ enabled = <0>;
+ plx = <0>;
+ primary;
+ port = <1>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ /* config space access MPAGE7 registers*/
+ reg = <0x0020 0xf8000000 0x01000000
+ 0x0020 0x004c8000 0x00008000 >;
+ bus-range = <0 0x0f>;
+ /* Outbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU (PLB) addr> <2-cell size> > */
+ ranges = <0x02000000 0x00000000 0xb0000000
+ 0x20 0xc0000000
+ 0x00 0x10000000>;
+ /* Inbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU addr> <2-cell size> > */
+ dma-ranges = <0x02000000 0x00000000 0x00000000
+ 0x00 0x00000000
+ 0x00 0x10000000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <72 2>;
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ /* <3-cell dev> <irq#> <prnt> <2-cell prnt IRQ/sense> */
+ 0000 0 0 1 &MPIC 72 2
+ 0000 0 0 2 &MPIC 72 2
+ 0000 0 0 3 &MPIC 72 2
+ 0000 0 0 4 &MPIC 72 2
+ >;
+ };
+
+ PCIE2: pciex at f00d0000 {
+ compatible = "lsi,plb-pciex";
+ device_type = "pci";
+ enabled = <0>;
+ plx = <0>;
+ primary;
+ port = <2>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ /* config space access MPAGE7 registers*/
+ reg = <0x0021 0x38000000 0x01000000
+ 0x0020 0x004d0000 0x00008000 >;
+ bus-range = <0 0x0f>;
+ /* Outbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU (PLB) addr> <2-cell size> > */
+ ranges = <0x02000000 0x00000000 0xc0000000
+ 0x21 0x00000000
+ 0x00 0x10000000>;
+ /* Inbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU addr> <2-cell size> > */
+ dma-ranges = <0x02000000 0x00000000 0x00000000
+ 0x00 0x00000000
+ 0x00 0x10000000>;
+
+ interrupt-parent = <&MPIC>;
+ interrupts = <73 2>;
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ /* <3-cell dev> <irq#> <prnt> <2-cell prnt IRQ/sense> */
+ 0000 0 0 1 &MPIC 73 2
+ 0000 0 0 2 &MPIC 73 2
+ 0000 0 0 3 &MPIC 73 2
+ 0000 0 0 4 &MPIC 73 2
+ >;
+ };
+
+ rio0: rapidio {
+ index = <0>;
+ status = "ok";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "acp,rapidio-delta";
+ device_type = "rapidio";
+ reg = <0x0020 0x00420000 0x1000>; /* SRIO Conf region */
+ ranges = <0x0 0x0 0x0020 0x80000000 0x0 0x40000000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <30 0x2 /* NCP_INTR_MPIC_SRC_AXIS_SRIO */>;
+ outb-dmes = <2 0x00000003 1 0x00000000>; /* X7 Defect 44844 */
+ };
+
+};
diff --git a/arch/powerpc/boot/dts/lsi_acp344x.dts b/arch/powerpc/boot/dts/lsi_acp344x.dts
new file mode 100644
index 0000000..63d49f5
--- /dev/null
+++ b/arch/powerpc/boot/dts/lsi_acp344x.dts
@@ -0,0 +1,355 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2009 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer at linux.vnet.ibm.com>, David Gibson <dwg at au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "ibm,acpx1-4xx";
+ compatible = "ibm,acpx1-4xx","ibm,47x-AMP";
+ dcr-parent = <&{/cpus/cpu at 0}>;
+
+ aliases {
+ serial0 = &UART0;
+ serial1 = &UART1;
+ rapidio0 = &rio0;
+ ethernet0 = &FEMAC;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <0>;
+ clock-frequency = <0x5f5e1000>;
+ timebase-frequency = <0x5f5e1000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ reset-type = <3>; // 1=core, 2=chip, 3=system (default)
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <1>;
+ clock-frequency = <0x5f5e1000>;
+ timebase-frequency = <0x5f5e1000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x2040>;
+ reset-type = <3>; // 1=core, 2=chip, 3=system (default)
+ };
+ cpu at 2 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <2>;
+ clock-frequency = <0x5f5e1000>;
+ timebase-frequency = <0x5f5e1000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x2080>;
+ reset-type = <3>; // 1=core, 2=chip, 3=system (default)
+ };
+ cpu at 3 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <3>;
+ clock-frequency = <0x5f5e1000>;
+ timebase-frequency = <0x5f5e1000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x20c0>;
+ reset-type = <3>; // 1=core, 2=chip, 3=system (default)
+ };
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x80000000>; // filled in by U-Boot
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0x80000000>; // filled in by U-Boot
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00030000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ pic-no-reset;
+ };
+
+ plb {
+ /* Could be PLB6, doesn't matter */
+ compatible = "ibm,plb-4xx", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; // Filled in by zImage
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full 32-bit
+ range */
+ ranges = <0x00000000 0x00000020 0x00000000 0x80000000
+ 0x80000000 0x00000020 0x80000000 0x80000000>;
+ clock-frequency = <0>; // Filled in by zImage
+ UART0: serial at 00404000 {
+ device_type = "serial";
+ compatible = "acp-uart0";
+ enabled = <1>;
+ reg = <0x00404000 0x1000>;
+ clock-reg = <0x00408040 0x20>;
+ clock-frequency = <0xbebc200>;
+ current-speed = <9600>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <22>;
+ };
+ UART1: serial at 00405000 {
+ device_type = "serial";
+ compatible = "acp-uart1";
+ enabled = <0>;
+ reg = <0x00405000 0x1000>;
+ clock-reg = <0x00408060 0x20>;
+ clock-frequency = <200000000>;
+ current-speed = <9600>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <23>;
+ };
+ USB0: usb at 004a4000 {
+ device_type = "usb";
+ compatible = "acp-usb";
+ enabled = <0>;
+ reg = <0x004a4000 0x00020000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <31>;
+ };
+ I2C: i2c at 00403000 {
+ compatible = "acp-i2c";
+ enabled = <0>;
+ reg = <0x00403000 0x00001000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <21>;
+ };
+ SSP: ssp at 00402000 {
+ compatible = "acp-ssp";
+ enabled = <0>;
+ reg = <0x00402000 0x00001000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <20>;
+ };
+ NAND: nand at 00440000 {
+ device_type = "nand";
+ compatible = "acp-nand";
+ enabled = <1>;
+ reg = <0x00440000 0x20000
+ 0x0040c000 0x1000>;
+ };
+ FEMAC: femac at 00480000 {
+ device_type = "network";
+ compatible = "acp-femac";
+ enabled = <1>;
+ reg = <0x00480000 0x1000
+ 0x00481000 0x1000
+ 0x00482000 0x1000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <33>;
+ mdio-reg = <0x00409000 0x1000>;
+ // The following will get filled in by
+ // the boot loader.
+ mdio-clock = <0>;
+ phy-address = <0>;
+ ad-value = <0>;
+ mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+
+ nvrtc {
+ compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+ reg = <0 0xEF703000 0x2000>;
+ };
+
+ system {
+ ncr_0x00a_0x010_0x0002c = <0>; // filled in by the boot loader.
+ ncr_0x016_0x0ff_0x00010 = <0>; // filled in by the boot loader.
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial at 00404000";
+ };
+
+ PCIE0: pciex at f00c0000 {
+ compatible = "lsi,plb-pciex";
+ device_type = "pci";
+ enabled = <0>;
+ plx = <0>;
+ primary;
+ port = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ /* config space access MPAGE7 registers*/
+ reg = < 0x0020 0x78000000 0x01000000
+ 0x0020 0x004c0000 0x00008000 >;
+ bus-range = <0 0x0f>;
+ /* Outbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU (PLB) addr> <2-cell size> > */
+ ranges = <0x02000000 0x00000000 0xa0000000
+ 0x20 0x40000000
+ 0x00 0x10000000>;
+ /* Inbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU addr> <2-cell size> > */
+ dma-ranges = <0x02000000 0x00000000 0x00000000
+ 0x00 0x00000000
+ 0x00 0x10000000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <29 2>;
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ /* <3-cell dev> <irq#> <prnt> <2-cell prnt IRQ/sense> */
+ 0000 0 0 1 &MPIC 29 2
+ 0000 0 0 2 &MPIC 29 2
+ 0000 0 0 3 &MPIC 29 2
+ 0000 0 0 4 &MPIC 29 2
+ >;
+ };
+
+ PCIE1: pciex at f00c8000 {
+ compatible = "lsi,plb-pciex";
+ device_type = "pci";
+ enabled = <0>;
+ plx = <0>;
+ primary;
+ port = <1>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ /* config space access MPAGE7 registers*/
+ reg = <0x0020 0xf8000000 0x01000000
+ 0x0020 0x004c8000 0x00008000 >;
+ bus-range = <0 0x0f>;
+ /* Outbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU (PLB) addr> <2-cell size> > */
+ ranges = <0x02000000 0x00000000 0xa0000000
+ 0x20 0xc0000000
+ 0x00 0x10000000>;
+ /* Inbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU addr> <2-cell size> > */
+ dma-ranges = <0x02000000 0x00000000 0x00000000
+ 0x00 0x00000000
+ 0x00 0x10000000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <72 2>;
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ /* <3-cell dev> <irq#> <prnt> <2-cell prnt IRQ/sense> */
+ 0000 0 0 1 &MPIC 72 2
+ 0000 0 0 2 &MPIC 72 2
+ 0000 0 0 3 &MPIC 72 2
+ 0000 0 0 4 &MPIC 72 2
+ >;
+ };
+
+ PCIE2: pciex at f00d0000 {
+ compatible = "lsi,plb-pciex";
+ device_type = "pci";
+ enabled = <0>;
+ plx = <0>;
+ primary;
+ port = <2>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ /* config space access MPAGE7 registers*/
+ reg = <0x0021 0x38000000 0x01000000
+ 0x0020 0x004d0000 0x00008000 >;
+ bus-range = <0 0x0f>;
+ /* Outbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU (PLB) addr> <2-cell size> > */
+ ranges = <0x02000000 0x00000000 0xa0000000
+ 0x21 0x00000000
+ 0x00 0x10000000>;
+ /* Inbound ranges */
+ /* < <3-cell PCI addr> <2-cell CPU addr> <2-cell size> > */
+ dma-ranges = <0x02000000 0x00000000 0x00000000
+ 0x00 0x00000000
+ 0x00 0x10000000>;
+
+ interrupt-parent = <&MPIC>;
+ interrupts = <73 2>;
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ /* <3-cell dev> <irq#> <prnt> <2-cell prnt IRQ/sense> */
+ 0000 0 0 1 &MPIC 73 2
+ 0000 0 0 2 &MPIC 73 2
+ 0000 0 0 3 &MPIC 73 2
+ 0000 0 0 4 &MPIC 73 2
+ >;
+ };
+
+ rio0: rapidio at f0020000{
+ index = <0>;
+ status = "ok";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "acp,rapidio-delta";
+ device_type = "rapidio";
+ reg = <0x0020 0x00420000 0x1000>; /* SRIO Conf region */
+ ranges = <0x0 0x0 0x0020 0x80000000 0x0 0x40000000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <30 0x2 /* NCP_INTR_MPIC_SRC_AXIS_SRIO */>;
+ outb-dmes = <2 0x00000003 1 0x00000000>; /* X7 Defect 44844 */
+ enable_ds = <1>;
+ inb-dse = <0x00000020 0x00000400 0x00000100>; /* virt_m, data, dbuf */
+ /* inb-dse = <0x00000002 0x00000020 0x00000020>; */
+ outb-dse = <0x00000010 0x00000400 0x00000400 0x00000010>; /*dse,hdr,data,dbuf */
+ /* outb-dse = <0x00000002 0x00000020 0x00000020 0x00000020>; */
+ };
+};
--
1.7.9.5
More information about the linux-yocto
mailing list