[linux-yocto] Feature branch on linux-yocto-3.14 for Valleyisland
chong.yi.chai at intel.com
chong.yi.chai at intel.com
Fri Apr 8 01:07:41 PDT 2016
From: "Chai, Chong Yi" <chong.yi.chai at intel.com>
Hi Bruce,
The feature branch (additional 66 commits) for enabling Valleyisland are ready to be fetched from Github.
This branch is targeted for kernel linux-yocto-3.14.
URL: https://github.com/yoctobsp/linux-yocto-3.14.git
Branch: standard/valleyisland
Stats:
Andy Shevchenko (9):
dma: dw: allocate memory in two stages in probe
dmaengine: dw: enable clock before access
dmaengine: dw: fix regression in dw_probe() function
dmaengine: dw: move dw_dmac.h to where it belongs to
dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces
dmaengine: dw: apply both HS interfaces and remove slave_id usage
dmaengine: dw: introduce generic filter function
dmaengine: dw: move clock operations to platform.c
serial: 8250: don't use slave_id of dma_slave_config
Antonio Ospite (1):
spi/pxa2xx: fix runtime PM enabling order
Chew, Chiau Ee (5):
x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
x86/byt: enable board file for BYT LPSS PCI mode
dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading
sequence
spi/pxa2xx: change default supported DMA burst size to 1
spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS
SPI
Chew, Kean Ho (4):
pinctrl-baytrail: unmap interrupt when free the gpio pin
pinctrl-baytrail: enable platform device in the absent of ACPI
enumeration
pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
system
mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode
Heikki Krogerus (2):
serial: 8250_pci: remove rts_n override from Baytrail quirk
ACPI / LPSS: not using UART RTS override with Auto Flow Control
Jingoo Han (1):
spi: pxa2xx: remove unnecessary OOM messages
Loic Poulain (1):
8250_dw: Support all baudrates on baytrail
Maurice Petallo (7):
i2c: allow Designware I2C to be probed before SMBus for Baytrail
mmc: sdhci: Preset value not supported in Baytrail eMMC
mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller
serial: 8250_pci: mask UART TX completion intr in byt_set_termios
serial: 8250_dw: mask UART TX completion intr in byt_set_termios
serial: 8250_core: handle_irq returns 1 only if data was processed
thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock
Mika Westerberg (2):
spi/pxa2xx: Prevent DMA from transferring too many bytes
spi/pxa2xx: Don't use slave_id of dma_slave_config
Roger Quadros (1):
usb: dwc3: core: Fix gadget for system suspend/resume
Sarah Sharp (1):
usb/xhci: Change how we indicate a host supports Link PM.
Srinivas Pandruvada (1):
thermal: Intel SoC DTS thermal
Wan Ahmad Zainie (31):
dmaengine: dw: fix checkpatch.pl warnings
pinctrl-baytrail: Serialize GPIO registers access with global spinlock
hpet: refactor driver
hpet: implement start/stop/query API
hpet: Fix checkpatch.pl warnings
i2c: designware: cleanup irq handler setting
i2c: designware: use hardware-provided Rx/Tx FIFO depths
i2c: designware: use symbolic names for command bits
i2c: designware: cleanup __i2c_dw_enable()
i2c: designware: explicitly abort running operation on disable
i2c: designware: improve FIFO performance
i2c: designware: add per-channel speed parameter and fast-plus speed
option
i2c: designware: add i2c high-speed support
i2c: designware: Fix checkpatch.pl warnings
mmc: block: refactor read-only handling
mmc: block: implement write request blocking
mmc: support whole-device temporary write protection over CSD bits
13:12
mmc: block: Fix checkpatch.pl warning
pwm: Add freq_hz and duty_percent
libata: add curr_xfer_mode attribute
libata: enable atapi_an by default
libata: handle HDIO_SET_DMA & HDIO_GET_DMA ioctl
scsi: add extended information to MEDIA_CHANGE
serial: 8250: Override the DCD and DSR pin status for Bay Trail
spi/pxa2xx: auto switch between PIO and DMA with configurable
threshold size
spi: modify spidev_test to test automatic PIO/DMA switching
spi/pxa2xx: Add new ioctl for configuring FIFO trigger level in
runtime
spi: modify spidev_test to test modifying FIFO trigger level during
runtime
usb: core: hub: Generate uevent for overcurrent event
usb: core: hub: Fix checkpatch.pl error
watchdog: iTCO_wdt: Fix checkpatch.pl warnings
Documentation/spi/spidev_test.c | 74 ++-
MAINTAINERS | 2 +-
arch/avr32/mach-at32ap/at32ap700x.c | 17 +-
arch/avr32/mach-at32ap/include/mach/atmel-mci.h | 2 +-
arch/x86/Kconfig | 9 +-
arch/x86/platform/Makefile | 3 +
arch/x86/platform/byt/Makefile | 1 +
arch/x86/platform/byt/byt-board.c | 84 ++++
drivers/acpi/acpi_lpss.c | 24 +-
drivers/ata/libata-core.c | 4 +-
drivers/ata/libata-scsi.c | 34 ++
drivers/ata/libata-transport.c | 15 +-
drivers/char/hpet.c | 644 +++++++++++++++---------
drivers/dma/Makefile | 2 +-
drivers/dma/dw/core.c | 108 ++--
drivers/dma/dw/internal.h | 28 +-
drivers/dma/dw/platform.c | 86 ++--
drivers/dma/dw/regs.h | 20 +-
drivers/i2c/busses/Makefile | 2 +-
drivers/i2c/busses/i2c-designware-core.c | 109 ++--
drivers/i2c/busses/i2c-designware-core.h | 8 +-
drivers/i2c/busses/i2c-designware-pcidrv.c | 143 ++++--
drivers/i2c/busses/i2c-designware-platdrv.c | 119 ++++-
drivers/mmc/Kconfig | 1 +
drivers/mmc/card/Kconfig | 13 +
drivers/mmc/card/block.c | 247 ++++++++-
drivers/mmc/core/mmc.c | 2 +
drivers/mmc/core/mmc_ops.c | 91 ++++
drivers/mmc/core/mmc_ops.h | 1 +
drivers/mmc/core/sd.c | 4 +
drivers/mmc/host/sdhci-acpi.c | 7 +-
drivers/mmc/host/sdhci-pci.c | 6 +-
drivers/mmc/host/sdhci.c | 3 +-
drivers/pinctrl/Kconfig | 19 +-
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-baytrail-dev.c | 159 ++++++
drivers/pinctrl/pinctrl-baytrail.c | 114 ++++-
drivers/pwm/core.c | 95 +++-
drivers/pwm/sysfs.c | 71 +++
drivers/scsi/scsi_lib.c | 80 +++
drivers/scsi/sr.c | 8 +
drivers/spi/spi-pxa2xx-dma.c | 33 +-
drivers/spi/spi-pxa2xx-pci.c | 64 ++-
drivers/spi/spi-pxa2xx.c | 60 ++-
drivers/spi/spidev.c | 19 +
drivers/thermal/Kconfig | 12 +
drivers/thermal/Makefile | 1 +
drivers/thermal/intel_soc_dts_thermal.c | 481 ++++++++++++++++++
drivers/tty/serial/8250/8250.h | 6 +-
drivers/tty/serial/8250/8250_core.c | 37 +-
drivers/tty/serial/8250/8250_dw.c | 110 +++-
drivers/tty/serial/8250/8250_pci.c | 81 ++-
drivers/usb/core/Kconfig | 9 +
drivers/usb/core/hub.c | 87 +++-
drivers/usb/dwc3/core.c | 2 +-
drivers/usb/host/xhci-hub.c | 8 +-
drivers/usb/host/xhci-pci.c | 6 -
drivers/watchdog/iTCO_wdt.c | 6 +-
include/linux/dw_dmac.h | 114 -----
include/linux/libata.h | 1 +
include/linux/mmc/card.h | 4 +-
include/linux/mmc/core.h | 1 +
include/linux/mmc/sdhci.h | 2 +
include/linux/pinctrl/pinctrl-byt.h | 16 +
include/linux/platform_data/dma-dw.h | 112 +++++
include/linux/pwm.h | 50 ++
include/linux/serial_8250.h | 1 +
include/linux/serial_core.h | 1 +
include/linux/spi/pxa2xx_spi.h | 9 +-
include/linux/spi/spi.h | 3 +
include/scsi/scsi_device.h | 18 +
include/sound/atmel-abdac.h | 2 +-
include/sound/atmel-ac97c.h | 2 +-
include/uapi/linux/hpet.h | 11 +-
include/uapi/linux/spi/spidev.h | 5 +
sound/atmel/abdac.c | 2 +-
sound/atmel/ac97c.c | 2 +-
77 files changed, 3053 insertions(+), 785 deletions(-)
create mode 100644 arch/x86/platform/byt/Makefile
create mode 100644 arch/x86/platform/byt/byt-board.c
create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
create mode 100644 drivers/thermal/intel_soc_dts_thermal.c
delete mode 100644 include/linux/dw_dmac.h
create mode 100644 include/linux/pinctrl/pinctrl-byt.h
create mode 100644 include/linux/platform_data/dma-dw.h
--
1.9.1
More information about the linux-yocto
mailing list