[linux-yocto] Feature branch on linux-yocto-3.14 for Valleyisland
Bruce Ashfield
bruce.ashfield at windriver.com
Fri Apr 8 08:09:02 PDT 2016
On 04/08/2016 04:07 AM, chong.yi.chai at intel.com wrote:
> From: "Chai, Chong Yi" <chong.yi.chai at intel.com>
>
> Hi Bruce,
>
> The feature branch (additional 66 commits) for enabling Valleyisland are ready to be fetched from Github.
> This branch is targeted for kernel linux-yocto-3.14.
>
> URL: https://github.com/yoctobsp/linux-yocto-3.14.git
> Branch: standard/valleyisland
>
fetched and merged to linux-yocto-3.14. We now have a standard/valleyisland
branch.
Cheers,
Bruce
>
> Stats:
>
> Andy Shevchenko (9):
> dma: dw: allocate memory in two stages in probe
> dmaengine: dw: enable clock before access
> dmaengine: dw: fix regression in dw_probe() function
> dmaengine: dw: move dw_dmac.h to where it belongs to
> dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces
> dmaengine: dw: apply both HS interfaces and remove slave_id usage
> dmaengine: dw: introduce generic filter function
> dmaengine: dw: move clock operations to platform.c
> serial: 8250: don't use slave_id of dma_slave_config
>
> Antonio Ospite (1):
> spi/pxa2xx: fix runtime PM enabling order
>
> Chew, Chiau Ee (5):
> x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
> x86/byt: enable board file for BYT LPSS PCI mode
> dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading
> sequence
> spi/pxa2xx: change default supported DMA burst size to 1
> spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS
> SPI
>
> Chew, Kean Ho (4):
> pinctrl-baytrail: unmap interrupt when free the gpio pin
> pinctrl-baytrail: enable platform device in the absent of ACPI
> enumeration
> pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
> system
> mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode
>
> Heikki Krogerus (2):
> serial: 8250_pci: remove rts_n override from Baytrail quirk
> ACPI / LPSS: not using UART RTS override with Auto Flow Control
>
> Jingoo Han (1):
> spi: pxa2xx: remove unnecessary OOM messages
>
> Loic Poulain (1):
> 8250_dw: Support all baudrates on baytrail
>
> Maurice Petallo (7):
> i2c: allow Designware I2C to be probed before SMBus for Baytrail
> mmc: sdhci: Preset value not supported in Baytrail eMMC
> mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller
> serial: 8250_pci: mask UART TX completion intr in byt_set_termios
> serial: 8250_dw: mask UART TX completion intr in byt_set_termios
> serial: 8250_core: handle_irq returns 1 only if data was processed
> thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock
>
> Mika Westerberg (2):
> spi/pxa2xx: Prevent DMA from transferring too many bytes
> spi/pxa2xx: Don't use slave_id of dma_slave_config
>
> Roger Quadros (1):
> usb: dwc3: core: Fix gadget for system suspend/resume
>
> Sarah Sharp (1):
> usb/xhci: Change how we indicate a host supports Link PM.
>
> Srinivas Pandruvada (1):
> thermal: Intel SoC DTS thermal
>
> Wan Ahmad Zainie (31):
> dmaengine: dw: fix checkpatch.pl warnings
> pinctrl-baytrail: Serialize GPIO registers access with global spinlock
> hpet: refactor driver
> hpet: implement start/stop/query API
> hpet: Fix checkpatch.pl warnings
> i2c: designware: cleanup irq handler setting
> i2c: designware: use hardware-provided Rx/Tx FIFO depths
> i2c: designware: use symbolic names for command bits
> i2c: designware: cleanup __i2c_dw_enable()
> i2c: designware: explicitly abort running operation on disable
> i2c: designware: improve FIFO performance
> i2c: designware: add per-channel speed parameter and fast-plus speed
> option
> i2c: designware: add i2c high-speed support
> i2c: designware: Fix checkpatch.pl warnings
> mmc: block: refactor read-only handling
> mmc: block: implement write request blocking
> mmc: support whole-device temporary write protection over CSD bits
> 13:12
> mmc: block: Fix checkpatch.pl warning
> pwm: Add freq_hz and duty_percent
> libata: add curr_xfer_mode attribute
> libata: enable atapi_an by default
> libata: handle HDIO_SET_DMA & HDIO_GET_DMA ioctl
> scsi: add extended information to MEDIA_CHANGE
> serial: 8250: Override the DCD and DSR pin status for Bay Trail
> spi/pxa2xx: auto switch between PIO and DMA with configurable
> threshold size
> spi: modify spidev_test to test automatic PIO/DMA switching
> spi/pxa2xx: Add new ioctl for configuring FIFO trigger level in
> runtime
> spi: modify spidev_test to test modifying FIFO trigger level during
> runtime
> usb: core: hub: Generate uevent for overcurrent event
> usb: core: hub: Fix checkpatch.pl error
> watchdog: iTCO_wdt: Fix checkpatch.pl warnings
>
> Documentation/spi/spidev_test.c | 74 ++-
> MAINTAINERS | 2 +-
> arch/avr32/mach-at32ap/at32ap700x.c | 17 +-
> arch/avr32/mach-at32ap/include/mach/atmel-mci.h | 2 +-
> arch/x86/Kconfig | 9 +-
> arch/x86/platform/Makefile | 3 +
> arch/x86/platform/byt/Makefile | 1 +
> arch/x86/platform/byt/byt-board.c | 84 ++++
> drivers/acpi/acpi_lpss.c | 24 +-
> drivers/ata/libata-core.c | 4 +-
> drivers/ata/libata-scsi.c | 34 ++
> drivers/ata/libata-transport.c | 15 +-
> drivers/char/hpet.c | 644 +++++++++++++++---------
> drivers/dma/Makefile | 2 +-
> drivers/dma/dw/core.c | 108 ++--
> drivers/dma/dw/internal.h | 28 +-
> drivers/dma/dw/platform.c | 86 ++--
> drivers/dma/dw/regs.h | 20 +-
> drivers/i2c/busses/Makefile | 2 +-
> drivers/i2c/busses/i2c-designware-core.c | 109 ++--
> drivers/i2c/busses/i2c-designware-core.h | 8 +-
> drivers/i2c/busses/i2c-designware-pcidrv.c | 143 ++++--
> drivers/i2c/busses/i2c-designware-platdrv.c | 119 ++++-
> drivers/mmc/Kconfig | 1 +
> drivers/mmc/card/Kconfig | 13 +
> drivers/mmc/card/block.c | 247 ++++++++-
> drivers/mmc/core/mmc.c | 2 +
> drivers/mmc/core/mmc_ops.c | 91 ++++
> drivers/mmc/core/mmc_ops.h | 1 +
> drivers/mmc/core/sd.c | 4 +
> drivers/mmc/host/sdhci-acpi.c | 7 +-
> drivers/mmc/host/sdhci-pci.c | 6 +-
> drivers/mmc/host/sdhci.c | 3 +-
> drivers/pinctrl/Kconfig | 19 +-
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/pinctrl-baytrail-dev.c | 159 ++++++
> drivers/pinctrl/pinctrl-baytrail.c | 114 ++++-
> drivers/pwm/core.c | 95 +++-
> drivers/pwm/sysfs.c | 71 +++
> drivers/scsi/scsi_lib.c | 80 +++
> drivers/scsi/sr.c | 8 +
> drivers/spi/spi-pxa2xx-dma.c | 33 +-
> drivers/spi/spi-pxa2xx-pci.c | 64 ++-
> drivers/spi/spi-pxa2xx.c | 60 ++-
> drivers/spi/spidev.c | 19 +
> drivers/thermal/Kconfig | 12 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/intel_soc_dts_thermal.c | 481 ++++++++++++++++++
> drivers/tty/serial/8250/8250.h | 6 +-
> drivers/tty/serial/8250/8250_core.c | 37 +-
> drivers/tty/serial/8250/8250_dw.c | 110 +++-
> drivers/tty/serial/8250/8250_pci.c | 81 ++-
> drivers/usb/core/Kconfig | 9 +
> drivers/usb/core/hub.c | 87 +++-
> drivers/usb/dwc3/core.c | 2 +-
> drivers/usb/host/xhci-hub.c | 8 +-
> drivers/usb/host/xhci-pci.c | 6 -
> drivers/watchdog/iTCO_wdt.c | 6 +-
> include/linux/dw_dmac.h | 114 -----
> include/linux/libata.h | 1 +
> include/linux/mmc/card.h | 4 +-
> include/linux/mmc/core.h | 1 +
> include/linux/mmc/sdhci.h | 2 +
> include/linux/pinctrl/pinctrl-byt.h | 16 +
> include/linux/platform_data/dma-dw.h | 112 +++++
> include/linux/pwm.h | 50 ++
> include/linux/serial_8250.h | 1 +
> include/linux/serial_core.h | 1 +
> include/linux/spi/pxa2xx_spi.h | 9 +-
> include/linux/spi/spi.h | 3 +
> include/scsi/scsi_device.h | 18 +
> include/sound/atmel-abdac.h | 2 +-
> include/sound/atmel-ac97c.h | 2 +-
> include/uapi/linux/hpet.h | 11 +-
> include/uapi/linux/spi/spidev.h | 5 +
> sound/atmel/abdac.c | 2 +-
> sound/atmel/ac97c.c | 2 +-
> 77 files changed, 3053 insertions(+), 785 deletions(-)
> create mode 100644 arch/x86/platform/byt/Makefile
> create mode 100644 arch/x86/platform/byt/byt-board.c
> create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
> create mode 100644 drivers/thermal/intel_soc_dts_thermal.c
> delete mode 100644 include/linux/dw_dmac.h
> create mode 100644 include/linux/pinctrl/pinctrl-byt.h
> create mode 100644 include/linux/platform_data/dma-dw.h
>
More information about the linux-yocto
mailing list