[linux-yocto] dwc3 pm enabling backport for standard/intel/base
Ernst, Eric
eric.ernst at linux.intel.com
Wed Jul 20 15:34:05 PDT 2016
Please consider pull-request listed below. We tested on Grosse Tete and verify
proper PM for USB after applying the set. This was rebased onto latest of
bxt-rebase, but I think we should consider also for standard/intel/base.
Let me know if you have questions/issues.
-Eric
The following changes since commit 256385e1e85055afb8432ecf0aeee65e2590d142:
usb: typec: add PD sink port support for Intel Whiskey Cove PMIC USB Type-C PHY driver (2016-07-15 11:05:09 -0400)
are available in the git repository at:
https://github.com/egernst/linux-yocto-4.4.git bxt-dwc3-pm-backport
for you to fetch changes up to f6d09c801315b8d90681eff66668b90c19cb0e51:
UPSTREAM: usb: Add USB 3.1 Precision time measurement capability descriptor support (2016-07-19 16:34:20 -0700)
----------------------------------------------------------------
Dan Carpenter (1):
UPSTREAM: usb: dwc3: gadget: fix mask and shift order in DWC3_DCFG_NUMP()
Du, Changbin (1):
UPSTREAM: usb: dwc3: make dwc3_debugfs_init return value be void
Felipe Balbi (50):
UPSTREAM: usb: dwc3: drop FIFO resizing logic
UPSTREAM: usb: dwc3: gadget: always enable CSP
UPSTREAM: usb: dwc3: gadget: purge dev_dbg() calls
UPSTREAM: usb: dwc3: gadget: pass a condition to dev_WARN_ONCE()
UPSTREAM: usb: dwc3: core: purge dev_dbg() calls
UPSTREAM: usb: dwc3: core: improve reset sequence
UPSTREAM: usb: dwc3: gadget: fix endpoint renaming
UPSTREAM: usb: dwc3: core: fix PHY handling during suspend
UPSTREAM: usb: dwc3: better name for our request management lists
UPSTREAM: usb: dwc3: remove num_event_buffers
UPSTREAM: usb: dwc3: drop ev_buffs array
UPSTREAM: usb: dwc3: gadget: pass ev_buff as cookie to irq handler
UPSTREAM: usb: dwc3: gadget: combine return points into a single one
UPSTREAM: usb: dwc3: gadget: clear SUSPHY bit before ep cmds
UPSTREAM: usb: dwc3: gadget: extract unlocked dwc3_gadget_wakeup()
UPSTREAM: usb: dwc3: gadget: put link to U0 before Start Transfer
UPSTREAM: usb: dwc3: gadget: rename busy/free_slot to trb_enqueue/dequeue
UPSTREAM: usb: dwc3: increase maximum number of TRBs per endpoint
UPSTREAM: usb: dwc3: core: document struct dwc3_request
UPSTREAM: usb: dwc3: switch trb enqueue/dequeue and first_trb_index to u8
UPSTREAM: usb: dwc3: get rid of DWC3_TRB_MASK
UPSTREAM: usb: dwc3: gadget: add trb enqueue/dequeue helpers
UPSTREAM: usb: dwc3: gadget: move % operation to increment helpers
UPSTREAM: usb: dwc3: gadget: use link TRB for all endpoint types
UPSTREAM: usb: dwc3: gadget: remove newline from trace
UPSTREAM: usb: dwc3: gadget: don't interrupt when chained
UPSTREAM: usb: dwc3: core: add fifo space helper
UPSTREAM: usb: dwc3: core: add helper to extract trb type
UPSTREAM: usb: dwc3: gadget: update DCFG.NumP to max burst size
UPSTREAM: usb: dwc3: gadget: disable automatic calculation of ACK TP NUMP
FROMLIST: usb: dwc3: gadget: re-factor ->udc_start and ->udc_stop
FROMLIST: usb: dwc3: gadget: fix gadget suspend/resume
FROMLIST: usb: dwc3: core: get rid of DWC3_PM_OPS macro
FROMLIST: usb: dwc3: gadget: prepare TRBs on update transfers too
FROMLIST: usb: dwc3: gadget: simplify __dwc3_gadget_kick_transfer()
FROMLIST: usb: dwc3: gadget: rely on sg_is_last() and list_is_last()
FROMLIST: usb: dwc3: gadget: remove udelay(1) when sending ep cmds
FROMLIST: usb: dwc3: gadget: return 0 if we try to Wakeup in superspeed
FROMLIST: usb: dwc3: gadget: split __dwc3_gadget_kick_transfer()
FROMLIST: usb: dwc3: gadget: initialize NUMP based on RxFIFO Size
FROMLIST: usb: dwc3: gadget: pass dep as argument to endpoint command
FROMLIST: usb: dwc3: gadget: add a pointer to endpoint registers
FROMLIST: usb: dwc3: core: move fladj to dwc3 structure
FROMLIST: usb: dwc3: core: re-factor init and exit paths
FROMLIST: usb: dwc3: core: simplify suspend/resume operations
FROMLIST: usb: dwc3: gadget: hold gadget IRQ in dwc->irq_gadget
FROMLIST: usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED
FROMLIST: usb: dwc3: gadget: fix for possible endpoint disable race
FROMLIST: usb: dwc3: implement runtime PM
FROMLIST: usb: dwc3: pci: add Power Management dummy hooks
Heikki Krogerus (2):
UPSTREAM: usb: dwc3: pci: make build-in device properties available
UPSTREAM: usb: dwc3: pci: pass the platform device as a parameter to dwc3_pci_quirks()
Jiebing Li (1):
UPSTREAM: usb: dwc3: gadget: release spin lock during gadget resume
John Youn (7):
UPSTREAM: usb: dwc3: Update speed checks for SuperSpeedPlus
UPSTREAM: usb: dwc3: Enable SuperSpeedPlus
UPSTREAM: usb: dwc3: Update maximum_speed for SuperSpeedPlus
UPSTREAM: usb: dwc3: Validate the maximum_speed parameter
UPSTREAM: usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command
UPSTREAM: usb: dwc3: DWC_usb31 controller check
UPSTREAM: usb: dwc3: Update register fields for SuperSpeedPlus
Konrad Leszczynski (2):
UPSTREAM: usb: dwc3: gadget: give better command return code
FROMLIST: usb: dwc3: fix for the isoc transfer EP_BUSY flag
Mathias Nyman (3):
UPSTREAM: usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices
UPSTREAM: usb: Add USB3.1 SuperSpeedPlus Isoc Endpoint Companion descriptor
UPSTREAM: usb: Add USB 3.1 Precision time measurement capability descriptor support
Rajesh Bhagat (1):
UPSTREAM: usb: dwc3: add disable receiver detection in P3 quirk
Roger Quadros (1):
UPSTREAM: usb: dwc3: gadget: Fix suspend/resume during device mode
Documentation/devicetree/bindings/usb/dwc3.txt | 4 +-
.../devicetree/bindings/usb/qcom,dwc3.txt | 1 -
drivers/usb/common/common.c | 1 +
drivers/usb/core/config.c | 6 +-
drivers/usb/core/devices.c | 10 +-
drivers/usb/core/hcd-pci.c | 2 +-
drivers/usb/core/hcd.c | 6 +-
drivers/usb/core/hub.c | 26 +-
drivers/usb/core/urb.c | 3 +-
drivers/usb/core/usb.h | 2 +-
drivers/usb/dwc3/core.c | 501 ++++++-----
drivers/usb/dwc3/core.h | 146 ++-
drivers/usb/dwc3/debug.h | 6 +-
drivers/usb/dwc3/debugfs.c | 245 ++---
drivers/usb/dwc3/dwc3-pci.c | 57 +-
drivers/usb/dwc3/ep0.c | 47 +-
drivers/usb/dwc3/gadget.c | 990 +++++++++++----------
drivers/usb/dwc3/gadget.h | 10 +-
drivers/usb/dwc3/io.h | 7 +-
drivers/usb/dwc3/platform_data.h | 2 +-
include/linux/usb.h | 1 +
include/uapi/linux/usb/ch9.h | 29 +
22 files changed, 1167 insertions(+), 935 deletions(-)
More information about the linux-yocto
mailing list