[linux-yocto] dwc3 pm enabling backport for standard/intel/base
Bruce Ashfield
bruce.ashfield at windriver.com
Thu Jul 21 10:12:25 PDT 2016
On 2016-07-20 06:34 PM, Ernst, Eric wrote:
> Please consider pull-request listed below. We tested on Grosse Tete and verify
> proper PM for USB after applying the set. This was rebased onto latest of
> bxt-rebase, but I think we should consider also for standard/intel/base.
>
They looked clean enough to me, so I went for the standard/intel/base
option.
These are now pushed to the repo, let me know if there are any build or
runtime issues. The merge was clean for all branches, so I don't expect
anything.
Bruce
> Let me know if you have questions/issues.
>
> -Eric
>
>
> The following changes since commit 256385e1e85055afb8432ecf0aeee65e2590d142:
>
> usb: typec: add PD sink port support for Intel Whiskey Cove PMIC USB Type-C PHY driver (2016-07-15 11:05:09 -0400)
>
> are available in the git repository at:
>
> https://github.com/egernst/linux-yocto-4.4.git bxt-dwc3-pm-backport
>
> for you to fetch changes up to f6d09c801315b8d90681eff66668b90c19cb0e51:
>
> UPSTREAM: usb: Add USB 3.1 Precision time measurement capability descriptor support (2016-07-19 16:34:20 -0700)
>
> ----------------------------------------------------------------
> Dan Carpenter (1):
> UPSTREAM: usb: dwc3: gadget: fix mask and shift order in DWC3_DCFG_NUMP()
>
> Du, Changbin (1):
> UPSTREAM: usb: dwc3: make dwc3_debugfs_init return value be void
>
> Felipe Balbi (50):
> UPSTREAM: usb: dwc3: drop FIFO resizing logic
> UPSTREAM: usb: dwc3: gadget: always enable CSP
> UPSTREAM: usb: dwc3: gadget: purge dev_dbg() calls
> UPSTREAM: usb: dwc3: gadget: pass a condition to dev_WARN_ONCE()
> UPSTREAM: usb: dwc3: core: purge dev_dbg() calls
> UPSTREAM: usb: dwc3: core: improve reset sequence
> UPSTREAM: usb: dwc3: gadget: fix endpoint renaming
> UPSTREAM: usb: dwc3: core: fix PHY handling during suspend
> UPSTREAM: usb: dwc3: better name for our request management lists
> UPSTREAM: usb: dwc3: remove num_event_buffers
> UPSTREAM: usb: dwc3: drop ev_buffs array
> UPSTREAM: usb: dwc3: gadget: pass ev_buff as cookie to irq handler
> UPSTREAM: usb: dwc3: gadget: combine return points into a single one
> UPSTREAM: usb: dwc3: gadget: clear SUSPHY bit before ep cmds
> UPSTREAM: usb: dwc3: gadget: extract unlocked dwc3_gadget_wakeup()
> UPSTREAM: usb: dwc3: gadget: put link to U0 before Start Transfer
> UPSTREAM: usb: dwc3: gadget: rename busy/free_slot to trb_enqueue/dequeue
> UPSTREAM: usb: dwc3: increase maximum number of TRBs per endpoint
> UPSTREAM: usb: dwc3: core: document struct dwc3_request
> UPSTREAM: usb: dwc3: switch trb enqueue/dequeue and first_trb_index to u8
> UPSTREAM: usb: dwc3: get rid of DWC3_TRB_MASK
> UPSTREAM: usb: dwc3: gadget: add trb enqueue/dequeue helpers
> UPSTREAM: usb: dwc3: gadget: move % operation to increment helpers
> UPSTREAM: usb: dwc3: gadget: use link TRB for all endpoint types
> UPSTREAM: usb: dwc3: gadget: remove newline from trace
> UPSTREAM: usb: dwc3: gadget: don't interrupt when chained
> UPSTREAM: usb: dwc3: core: add fifo space helper
> UPSTREAM: usb: dwc3: core: add helper to extract trb type
> UPSTREAM: usb: dwc3: gadget: update DCFG.NumP to max burst size
> UPSTREAM: usb: dwc3: gadget: disable automatic calculation of ACK TP NUMP
> FROMLIST: usb: dwc3: gadget: re-factor ->udc_start and ->udc_stop
> FROMLIST: usb: dwc3: gadget: fix gadget suspend/resume
> FROMLIST: usb: dwc3: core: get rid of DWC3_PM_OPS macro
> FROMLIST: usb: dwc3: gadget: prepare TRBs on update transfers too
> FROMLIST: usb: dwc3: gadget: simplify __dwc3_gadget_kick_transfer()
> FROMLIST: usb: dwc3: gadget: rely on sg_is_last() and list_is_last()
> FROMLIST: usb: dwc3: gadget: remove udelay(1) when sending ep cmds
> FROMLIST: usb: dwc3: gadget: return 0 if we try to Wakeup in superspeed
> FROMLIST: usb: dwc3: gadget: split __dwc3_gadget_kick_transfer()
> FROMLIST: usb: dwc3: gadget: initialize NUMP based on RxFIFO Size
> FROMLIST: usb: dwc3: gadget: pass dep as argument to endpoint command
> FROMLIST: usb: dwc3: gadget: add a pointer to endpoint registers
> FROMLIST: usb: dwc3: core: move fladj to dwc3 structure
> FROMLIST: usb: dwc3: core: re-factor init and exit paths
> FROMLIST: usb: dwc3: core: simplify suspend/resume operations
> FROMLIST: usb: dwc3: gadget: hold gadget IRQ in dwc->irq_gadget
> FROMLIST: usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED
> FROMLIST: usb: dwc3: gadget: fix for possible endpoint disable race
> FROMLIST: usb: dwc3: implement runtime PM
> FROMLIST: usb: dwc3: pci: add Power Management dummy hooks
>
> Heikki Krogerus (2):
> UPSTREAM: usb: dwc3: pci: make build-in device properties available
> UPSTREAM: usb: dwc3: pci: pass the platform device as a parameter to dwc3_pci_quirks()
>
> Jiebing Li (1):
> UPSTREAM: usb: dwc3: gadget: release spin lock during gadget resume
>
> John Youn (7):
> UPSTREAM: usb: dwc3: Update speed checks for SuperSpeedPlus
> UPSTREAM: usb: dwc3: Enable SuperSpeedPlus
> UPSTREAM: usb: dwc3: Update maximum_speed for SuperSpeedPlus
> UPSTREAM: usb: dwc3: Validate the maximum_speed parameter
> UPSTREAM: usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command
> UPSTREAM: usb: dwc3: DWC_usb31 controller check
> UPSTREAM: usb: dwc3: Update register fields for SuperSpeedPlus
>
> Konrad Leszczynski (2):
> UPSTREAM: usb: dwc3: gadget: give better command return code
> FROMLIST: usb: dwc3: fix for the isoc transfer EP_BUSY flag
>
> Mathias Nyman (3):
> UPSTREAM: usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices
> UPSTREAM: usb: Add USB3.1 SuperSpeedPlus Isoc Endpoint Companion descriptor
> UPSTREAM: usb: Add USB 3.1 Precision time measurement capability descriptor support
>
> Rajesh Bhagat (1):
> UPSTREAM: usb: dwc3: add disable receiver detection in P3 quirk
>
> Roger Quadros (1):
> UPSTREAM: usb: dwc3: gadget: Fix suspend/resume during device mode
>
> Documentation/devicetree/bindings/usb/dwc3.txt | 4 +-
> .../devicetree/bindings/usb/qcom,dwc3.txt | 1 -
> drivers/usb/common/common.c | 1 +
> drivers/usb/core/config.c | 6 +-
> drivers/usb/core/devices.c | 10 +-
> drivers/usb/core/hcd-pci.c | 2 +-
> drivers/usb/core/hcd.c | 6 +-
> drivers/usb/core/hub.c | 26 +-
> drivers/usb/core/urb.c | 3 +-
> drivers/usb/core/usb.h | 2 +-
> drivers/usb/dwc3/core.c | 501 ++++++-----
> drivers/usb/dwc3/core.h | 146 ++-
> drivers/usb/dwc3/debug.h | 6 +-
> drivers/usb/dwc3/debugfs.c | 245 ++---
> drivers/usb/dwc3/dwc3-pci.c | 57 +-
> drivers/usb/dwc3/ep0.c | 47 +-
> drivers/usb/dwc3/gadget.c | 990 +++++++++++----------
> drivers/usb/dwc3/gadget.h | 10 +-
> drivers/usb/dwc3/io.h | 7 +-
> drivers/usb/dwc3/platform_data.h | 2 +-
> include/linux/usb.h | 1 +
> include/uapi/linux/usb/ch9.h | 29 +
> 22 files changed, 1167 insertions(+), 935 deletions(-)
>
>
More information about the linux-yocto
mailing list