[meta-freescale] 回复: =?utf-8?Q?=E5=9B=9E=E5=A4=8D=EF=BC=9A__?=IMX53QSB-R can not boot from microSD
jojo
rjiejie at gmail.com
Tue Oct 29 19:14:13 PDT 2013
Hi,
I use the command like you to copy image besides failing as bellow also,
i think about u-boot does not recognize the microSD really, and there is no
normal SD adapter in my IMX53QSB :(
i just have microSD in my board ….any ideal about this ?
BTW, my microSD is "SanDisk 4GB class 4"
U-Boot 2013.10 (Oct 28 2013 - 17:28:17)
Board: MX53 LOCO
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
MMC: no card present
MMC init failed
Using default environment
In: serial
Out: serial
Err: serial
CPU: Freescale i.MX53 family rev2.1 at 1000 MHz
Reset cause: POR
Net: FEC
Warning: failed to set MAC address
Hit any key to stop autoboot: 0
MMC: no card present
mmc0(part 0) is current device
MMC: no card present
Booting from net ...
*** ERROR: `ethaddr' not set
*** ERROR: `ethaddr' not set
Wrong Image Format for bootm command
ERROR: can't get kernel image!
MX53LOCO U-Boot >
Thanks,
- Jojo
在 2013年10月29日星期二,下午6:20,Daiane Angolini 写道:
> On 10/29/2013 01:07 AM, jojo wrote:
> > Hi,
> > I use the command "sudo dd
> > if=fsl-image-gui-imx53qsb-20131024020930.rootfs.sdcard of=/dev/sdb
> > bs=1M" to put image in to microSD,
> > is it right about for my step to burning SD image into microSD ?
> >
>
>
> Hi Jojo
>
> I copy using:
>
> sudo dd if=fsl-image-gui-imx53qsb-20131024020930.rootfs.sdcard of=/dev/sdb
>
>
>
> Daiane
> >
> > BTW, what's your step of burning ? i think about my command is wrong :(
> >
> > Thanks,
> >
> > - Jojo
> >
> > 在 2013年10月28日星期一,下午11:07,Daiane Angolini 写道:
> >
> > > On 10/28/2013 09:22 AM, jojo wrote:
> > > > Hi
> > > > Help ….
> > > >
> > > > no none met this issue ?
> > > U-Boot 2013.10 (Oct 28 2013 - 10:51:11)
> > >
> > > Board: MX53 LOCO
> > > I2C: ready
> > > DRAM: 1 GiB
> > > MMC: FSL_SDHC: 0, FSL_SDHC: 1
> > >
> > >
> > > I tested with core-image-base, and I was able to reach the user-space
> > > prompt.
> > >
> > > Daiane
> > >
> > >
> > > > OMG...
> > > >
> > > > Thanks,
> > > >
> > > > - Jojo
> > > >
> > > > 在 2013年10月25日星期五,下午3:44,jojo 写道:
> > > >
> > > > > Hi,
> > > > > I use microSD to boot my board,
> > > > >
> > > > > and i have done two microSD card,
> > > > > either of them is failed :(
> > > > >
> > > > > Thanks,
> > > > >
> > > > > - Jojo
> > > > >
> > > > > 在 2013年10月25日星期五,下午3:18,Eric Bénard 写道:
> > > > >
> > > > > > Hi Jojo,
> > > > > >
> > > > > > Le Fri, 25 Oct 2013 14:49:31 +0800,
> > > > > > jojo <rjiejie at gmail.com <mailto:rjiejie at gmail.com>> a écrit :
> > > > > > > I rebuild the imx53qsb completely and boot failed also as bellow :
> > > > > > >
> > > > > > > and i do not change anything about for yocto dora except DL_DIR to
> > > > > > > redirect to "DL_DIR = "${TOPDIR}/../../downloads""
> > > > > > >
> > > > > > > U-Boot 2013.10-rc3 (Oct 25 2013 - 13:28:32)
> > > > > > >
> > > > > > > Board: MX53 LOCO
> > > > > > > I2C: ready
> > > > > > > DRAM: 1 GiB
> > > > > > > MMC: FSL_SDHC: 0, FSL_SDHC: 1
> > > > > > > MMC: no card present
> > > > > > > MMC init failed
> > > > > > >
> > > > > >
> > > > > >
> > > > > > can you try with an other SDCard it seems u-boot fails to initialize
> > > > > > this one.
> > > > > > I'll try dora on MX53QSB asap.
> > > > > >
> > > > > > Eric
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > meta-freescale mailing list
> > > > meta-freescale at yoctoproject.org <mailto:meta-freescale at yoctoproject.org>
> > > > https://lists.yoctoproject.org/listinfo/meta-freescale
> > > >
> > >
> > >
> > >
> > > --
> > > Daiane
> > >
> >
> >
>
>
>
> --
> Daiane
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131030/1868a8ad/attachment.html>
More information about the meta-freescale
mailing list