[meta-freescale] 回复: 回复: IMX53QSB-R can not boot from microSD
Otavio Salvador
otavio at ossystems.com.br
Wed Oct 30 04:40:49 PDT 2013
Hello,
On Wed, Oct 30, 2013 at 12:14 AM, jojo <rjiejie at gmail.com> wrote:
> I use the command like you to copy image besides failing as bellow also,
>
> i think about u-boot does not recognize the microSD really, and there is no
> normal SD adapter in my IMX53QSB :(
>
> i just have microSD in my board ….any ideal about this ?
>
> BTW, my microSD is "SanDisk 4GB class 4"
>
>
> U-Boot 2013.10 (Oct 28 2013 - 17:28:17)
>
> Board: MX53 LOCO
> I2C: ready
> DRAM: 1 GiB
> MMC: FSL_SDHC: 0, FSL_SDHC: 1
> MMC: no card present
> MMC init failed
> Using default environment
>
> In: serial
> Out: serial
> Err: serial
> CPU: Freescale i.MX53 family rev2.1 at 1000 MHz
> Reset cause: POR
> Net: FEC
> Warning: failed to set MAC address
>
> Hit any key to stop autoboot: 0
> MMC: no card present
> mmc0(part 0) is current device
> MMC: no card present
> Booting from net ...
> *** ERROR: `ethaddr' not set
> *** ERROR: `ethaddr' not set
> Wrong Image Format for bootm command
> ERROR: can't get kernel image!
> MX53LOCO U-Boot >
Did you try replacing your uSD card?
This is an indication of uSD card or connector problems (more likely
the first). U-Boot is failing to 'see' your card.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list