[meta-ti] unable to fetch a repository mentioned in SRC_URI

[Sundareson, Prabindh]

Is this resolved - were you able to generate the image ? I seem to be having a similar issue, 

regards,
Prabu


-----Original Message-----
From: meta-ti-bounces at yoctoproject.org [mailto:meta-ti-bounces at yoctoproject.org] On Behalf Of Dmytriyenko, Denys
Sent: Thursday, August 15, 2013 1:00 AM
To: Christian Gagneraud
Cc: meta-ti at yoctoproject.org
Subject: Re: [meta-ti] unable to fetch a repository mentioned in SRC_URI

On Thu, Aug 15, 2013 at 08:28:37AM +1200, Christian Gagneraud wrote:
> On 08/12/2013 06:27 AM, Denys Dmytriyenko wrote:
> >On Tue, Aug 06, 2013 at 11:43:08AM +0000, Prathamesh P Ghanekar wrote:
> >>Hello,
> >>
> >>I am trying to integrate meta-ti layer into the current yocto 
> >>project. I wish to build the image for pandaboard.
> >>
> >>I am adding another layer called meta-ivi in the yocto kernel which 
> >>provided functionality for in-vehicle infotainment systems. In the 
> >>meta-ivi layer, there is a recipe "foton-image", which builds GENIVI 
> >>compliant baseline image. Also, few recipes were masked to resolve the license issue.
> >>
> >>So, setting all the variables in the conf/local.conf and 
> >>conf/bblayers.conf file, I build the image as follows.
> >>
> >>
> >>è bitbake foton-image
> >>
> >>
> >>I ended up with following error, which indicates that there's a failure in fetching the repository.
> >>
> >>Here is the output log for your reference:
> >>
> >>prathamesh at mintos ~/workdir/poky-dylan-9.0.1/build $ bitbake 
> >>foton-image Loading cache: 100% 
> >>|###################################################################################################################################| ETA:  00:00:00 Loaded 1220 entries from dependency cache.
> >>
> >>Build Configuration:
> >>BB_VERSION        = "1.18.0"
> >>BUILD_SYS         = "i686-linux"
> >>NATIVELSBSTRING   = "LinuxMint-14"
> >>TARGET_SYS        = "arm-oe-linux-gnueabi"
> >>MACHINE           = "pandaboard"
> >>DISTRO            = "poky-ivi-systemd"
> >>DISTRO_VERSION    = "4.0.2"
> >>TUNE_FEATURES     = "armv7a vfp neon"
> >>TARGET_FPU        = "vfp-neon"
> >>meta
> >>meta-yocto
> >>meta-yocto-bsp
> >>meta-ivi-4.0.2    = "<unknown>:<unknown>"
> >>meta-ti           = "master:c14c386946e1ea341faeea292580e37d538d645d"
> >>
> >>NOTE: Resolving any missing task queue dependencies
> >>NOTE: multiple providers are available for u-boot (u-boot, 
> >>u-boot-ti-staging)
> >>NOTE: consider defining a PREFERRED_PROVIDER entry to match u-boot
> >>NOTE: Preparing runqueue
> >>NOTE: Executing SetScene Tasks
> >>NOTE: Executing RunQueue Tasks
> >>WARNING: Failed to fetch URL 
> >>git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protoco
> >>l=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/inte
> >>gration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>, 
> >>attempting MIRRORS if available
> >>ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
> >>Cloning into bare repository '/home/prathamesh/workdir/poky-dylan-9.0.1/build/downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git'...
> >>
> >>fatal: The remote end hung up unexpectedly
> >>fatal: early EOF
> >>fatal: index-pack failed
> >It seems you had your connection terminated unexpectedly... Have you 
> >tried it again? Does it happen every time?
> >BTW, seems to work fine here...
> 
> I ran into similar problems recently (strange git failure), but as I 
> didn't have strong need to build new stuff, I simply gave up straight 
> away and switched to another task.
> The only "odd" thing I have here, is a *@#$! proxy. I am located in 
> New Zealand.

And some of our engineers are having weird issues with the proxy as well. 
Probably a moon phase... :)

--
Denys


> >>ERROR: Function failed: Fetcher failure for URL: 'git://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487<http://dev.omapzoom.org/pub/scm/integration/kernel-ubuntu.git;protocol=git;branch=ti-ubuntu-3.4-1487>'. Unable to fetch URL from any source.
> >>ERROR: Logfile of failure stored in: /home/prathamesh/workdir/poky-dylan-9.0.1/build/tmp-eglibc-eglibc/work/pandaboard-oe-linux-gnueabi/linux-omap4/3.4-r0/temp/log.do_fetch.4257
> >>ERROR: Task 910 (/home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch) failed with exit code '1'
> >>NOTE: Tasks Summary: Attempted 2323 tasks of which 2231 didn't need to be rerun and 1 failed.
> >>Waiting for 0 running tasks to finish:
> >>
> >>Summary: 1 task failed:
> >>   /home/prathamesh/workdir/meta-ti/recipes-kernel/linux/linux-omap4_3.4.bb<http://linux-omap4_3.4.bb>, do_fetch
> >>Summary: There was 1 WARNING message shown.
> >>Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
> >>
> >>Note:
> >>1. I have successfully built the foton-image for target vexpressa9, and it
> >>boots without any errors in the qemu emulator.
> >>2. I am able to 'git clone' the above mentioned repository. If you could let
> >>me know how can I use the local repository for build process. I tried
> >>copying the repository in downloads folder, but it did not work somehow.
> >You need to get a bare repository and place it into:
> >downloads/git2/dev.omapzoom.org.pub.scm.integration.kernel-ubuntu.git
> >
> 
> _______________________________________________
> meta-ti mailing list
> meta-ti at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
_______________________________________________
meta-ti mailing list
meta-ti at yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-ti